2016-2023 Toyota Tacoma Cat-Back Exhaust Install/Overview Video by Carven Exhaust
Вставка
- Опубліковано 9 кві 2020
- ⬇️❗️For 2022-2023 TOYOTA TACOMAS ONLY❗️⬇️
Please watch this short video on how to properly install FLANGE section.
• 2022 Toyota Tacoma Cat...
❗️LONG BED TACOMA CAT-BACK KIT NOW AVAILABLE & FITS 2022-2023 Models❗️
⬇️Head over to our website⬇️
carvenexhaust.com/collections...
SPECIAL GUEST @kaedkniffing
In this install we go over the ins and outs of the full cat back❗️
We go over tools needed for install🔧
Comparison w/ a OEM Stock Tacoma🔉
Compared to our Full Cat-Back Kit🔊
304 Stainless Steel✔️
Mandrel Tube Bending✔️
TIG welding PROCESSES✔️
MADE IN THE USA 🇺🇸
--------------FOLLOW CARVEN EXHAUST------------------
-Follow us on Instagram
➢@Carvenexhaust
-Like our Facebook page
➢ Carvenexhaust
Have a question that needs an immediate answer?
Drop it below or contact the shop customer service line
(951) 817 5101
M-F 7:30am - 3:00pm PST. - Авто та транспорт
Fits the 2022 Tacoma's!
Here's the link to how to properly install it on a 2022! ua-cam.com/users/shorts1yKkGx98Z7c?feature=share
Link to the product is carvenexhaust.com/collections/toyota
use code JT0922 for a discount at checkout.
You guys should think about putting a groove in the flange like the OEM. I just went to install mine and the flange is completely flat unlike my OEM. When you tighten it without a groove there’s nowhere for the gasket to go hence why it will always have some kind of gap there no matter what. The OEM has that for a reason, I can send pictures to show what I’m talking about but I haven’t seen anyone mention this and it’s very weird oversight for such an otherwise great company. This is coming from my father who’s a Toyota master mechanic for 30+ years
These guys make a fine product. This was a half hour install with no lift. Make sure and do it just like shown here. The sound clip here does not do it justice. It sounds better than I had been anticipating, it has a real nice growl to it. I am very happy, thanks Carven.
that is awesome to hear. What we strive for is allowing everyday car enthusiast to be able to install our product at the comfort of there home no need to take it to shops anymore( Unless you installing products that need welding)
On a scale of 1-10 how loud is it?
I’m gonna be getting a new exhaust in a few weeks and I want something that’s just right.
Definitely going to order this exhaust
Just installed mine today for my 22 Trd off road start to finish took me about 45 minutes! Absolutely love it 😎
That bad boy sounds cruuuuuuuuunchy I love it
Love it. And I don't even have a tacoma. Yet. Great instructional vid! The little tips were awesome.
Our Main focus on out Bolt On Cat-Back Kits is to be able to show that any one (even if you ever installed a car part) can install our cat back kits.
Great job on this kit!!! Definitely ordering one. I’ve searched for weeks and I’m def thinking this is the best sounding exhaust for the Tacoma 3.5
Awesome use code covid19 for a discount at check out and we will though in one gear!
This is probably the best sounding exhaust I've heard on a tacoma. I'm gonna order one for my 19
Awesome!
Sounds like a new gen raptor nice!👌🏼
I ordered one today after watching the video. Best sound I've found compared to any others out there. Can't wait. I have a 6-speed manual, so more opportunity to enjoy the exhaust note. 🙂
Great to hear!
Wow that sound is sick!
Sounds better than any other exhaust I have seen on the Tacoma
Thank You!
After researching for a few months this is probably the one I'm going to buy for my 2019 Tacoma.
Use code WELCOMEBACK
Just ordered this for my 2016 Tacoma SR5, also got you guys on Facebook & Instagram. Can't wait to put it on! This is by far the best video for an exhaust for a Tacoma, I love the sound of the exhaust!
wow! This sounds better and better everyday. I have had this for a week so far and everyone has said how much they like the sound from my Tacoma! Thanks Carven Exhaust!
Awesome! Thank you!
TnDirtDauber Any in cab drone at highway speeds or under acceleration??? Maybe you can post a video, thanks!
@@AKBRONCOSFAN007 I don't have a problem with any drone noise in the cab from the exhaust, my tires on the other hand are a different story lol.
Man imagine trying to do this installation while using a creeper under your truck lol, thanks for the video :P I was going to try to do this in my front driveway with a creeper but it sure looks alot easier if you can put it on a lift and walk under the truck like your doing in the video. Hopefully I have some good muffler shops around me that can do this.
Just ordered mine today, can’t wait 😃
Awesome! Make sure to tag us on your install and start ups! we will repost it on our Social Media
So this morning my son and I installed this kit on my 2020 Cement TRD 4x4 Off Road. It really growls. I have a 6 speed manual and it has that sweet sort of gurgling, burping sound when you let off the gas. 😎 Louder than I thought it was gonna be, but I'm REALLY happy with the purchase. Thank you Carven.
That is awesome!
Gonna order mine this week! So stoked.
Dis u het one how do u like it ?
Mine arrives tomorrow! Going to be a good day👍🏽
Hope you enjoy it!
I got a 2012 is there an exhaust that’s sounds as good as this one?
Just got mine today, installing tomorrow...this vid sold me!! 🤙
Nice ! Tag Us in all your install and overviews!
I'm stilling waiting for mine. lol I almost want to cancel. haha
Hows it running so far?
I ordered my Cat-Back exhaust kit for my 3rd gen Tacoma on Monday. It was delivered to New York by Friday. It arrived in perfect condition due to the quality packaging.
Thanks to this instructional video I was able to install it on my lunch break. If everyone follows the detailed instructions that you provide, they will be successful. Seriously if a 49-year-old IT guy can install the system laying flat on his back in his driveway on his lunch break; you kids should be able to install it on your own, no problem! 👍
Haha yes! love this comment and We are glad to hear you enjoyed the kit.
damn, i was like that kid looks familiar then i remember i saw him on buttery’s channel lmao
Excellent intro music!
This by far sounds way better than all the other cat back exhausts in the market.
Yep, just got mine today. Pumped to install it.
Tag Us In all your installs!
Definitely going to place an order right now
Tag us in your install!
I’m about to place my order lmao. I’ve been watching this video. And this exhaust kit sold me!!!
Hope you enjoy it!
Did u get one how do u like it ?
Does it go good on a 2021 Toyota tacoma SR5
Ordered mine 2 weeks ago can’t wait to put it on my truck! It has that perfect gurgle sound to it.
We are literally packing these kits as I type this
Dis u get one how do u like it
@@mig_hulk7909 best exhaust I’ve had on my truck perfect gurgle and with my Injen ram air intake it’s amazing!
Sounds awesome! I ordered mine with the dope black tip on Friday night and can't wait for her to arrive! Thanks Carven, you guys really make the best Tacoma exhaust hands down. My dad and I are going to be taking off the stock one without a lift and installing the Carven, doing it exactly how you did. I was worried about not having a lift but I ordered the rubber clip removal tool and I know you and others said no lift is required so it will get done. Thanks again. I'll be doing a before and after video to show how good it sounds. -Alex
Awsome! yes, there is no need for a lift if you have someone to help you which in this case you do. The only hard part is removing the OEM Exhaust once you take it off the cat back kit will tie down like butter
@@CarvenExhaust I'm stoked I even got a tracking number already as of today! Can't wait to put my new Carven exhaust on! Yeah I charged up a m18 battery for my bandsaw just in case I decide to just cut the old exhaust off if it's going to put up too much of a fight (Will never need that OEM sound of nothing again). Thanks for the perfect install video, definitely going to follow it step by step. Should be a piece of cake like you said once the stock exhaust is off. Thanks again. Carven for the Taco Win!
@@alexbernard8579 Can't wait tag us in the install!
Looks like I have something else to spend $$ on. Will be ordering soon. Great video.
use code covid19 for a discount at checkout!
After watching this video... just ordered mine right away and I have tacoma 21 white trd off road lifted 2.5" with yokohama 285/70R/17 👊😁... can't wait to hear it in person 👍
Right on!
Basically same truck as mine but I have nitto tires in that size
Searched long and far for a exhaust that wouldn't be too loud and I feel "just enough sauce" got my coworker to order one and I ordered one last night. Def excited, should be awesome!!!
Good choice! That is awesome please feel free to tag us in all your install wed be glad to view your videos!
Mine is coming in! Or getting worked on. Excited to put this bad boy on
Hell Yeah!
dang dude imma get a Toyota Tacoma as my first car and do some mods to it and i was looking for the right exhaust for it and this is the one i know it.
I just got my Tacoma sr5 2021 and I used to work at carven so I might get it, I know nothing on cat backs exhaust , so I’m wondering if it adds any hp on stock Tacoma or mpg
Glad I found this video. But I'm torn between this and MBRP. Im also looking at putting on dual exhaust. Is your kit available in duals?
Unfortunately not in a dual exhaust
Great exhaust tone! Would this fit a 2008 Tacoma Prerunner (4.0L) double cab short bed?
Unfortunately it will not
Ordered mine couple weeks ago, super excited to get it on my 2020Pro
What size of you truck bed?
@@terencewong1945 just showed up today! Got the 5ft bed
@@scottie8984 happy with it?
@@scottie8984 how’s the drone and overall sound?
@@balenci8425 I haven't experienced any droning. It sounds awesome. I think it would sound better with an ov tune which makes the truck shift better and smoother. Getting that done soon.
Hey man I’m a huge fan of you’re guys work and I was wondering how much to custom make an exhaust for my 02 tacoma ?
unfortunately we do not do any custom work at the moment
This video sold me I placed my order lol.
AMAZING! we will give you some gear in your order!
Sounds badass man!!! Do you recommend headers for better airflow and horsepower?
Installing Headers is always a good for gaining hp
Sounds good
Thank you!
I did mine about 2 1/2 months ago and I’m super happy with the six speed Tacoma,makes nice growl! Also, I’m getting like 1.5 miles per gallon better which isn’t bad lol
Really?! Thats awesome!
Gonna get this next week for my 2020 taco.
Just ordered mine through import image racing. They have no eta for it yet. Lol
@@vannatouch2172 I ordered straight from Carven. Took about a week.
WE HANDCRAFT AND BUILD IT FROM SCRATCH BUILT FROM STAINLESS MATERIAL ASSEMBLED WITH TIG WELDING PROCESSES I Promise we are working are hardest fastest to have these amazing kits built asap so we can ship out this week Thank you for being so patient with us. TAG us in all your installs can't wait to hear it.
@@CarvenExhaust Thank you for the reply back, not many videos. So it was hard to decide. Plus this is my first truck and I'm excited to get it and install it. Can't wait for you guys to ship it out soon! Lol
Does Carven make a Tacoma cat-back kit that dumps downward over the rear axle vs passenger side exit?
Yes, our Tacoma Kit actually has the option to run as a passenger side exit or a axel dump.
So hearing the exhaust is fiberglass packed, in the dirtbike world you have to repack after many hours. Is this the same in the truck exhaust world, where I guess not possible since ends welded? Do other brands mbrp, afe, rough country, ect fiberglass pack? Also I have a 23 trd can I put digital mph on the screen like the the customers in the video?
Our mufflers are pillowed packed, meaning there will be no need for repacking. Our pillow pack designed mufflers eliminated the fiber glass getting blown out.
I put it on my 2017 Tacoma limited and I love it! Only problem is that some condensation drips from where you screw in the new bolts. Is it supposed to do that?
need to be pulled more towards the engine and re tighten down clamps and bolts.
Mine did the same thing this morning. After I drove around the block, it stopped.
Amazing exhaust Carven! Definitely will be ordering one! Any promo or discount codes?
Yes! NEWSITE 10% off
Website says it will only fit 4 door short bed but has a long bed option? Will this fit an access cab with 6ft bed? Best sounding exhaust I’ve heard and would love to have it lol
can you email me with this question ? Jason@carvenexhaust.com
Part number for OEM exhaust gasket?
17:30 for exhaust, keeping this for myself for the future😂😂
This time stamp is gold! Did you end up getting this exhaust?
@@MF-qx9fn no I don’t even have a Tacoma but if I do this is the one I’m getting
took off my trd pro exhaust and bolted this badboy up today. sounds very nice. one thing i was wondering was, does it take a while for the muffler to break in? i know for like flowmaster it takes a week or two for the packing to acclimate amd have that signature flowmaster sound. or atleast thats how it was for me with my past two tacomas. the reason why i ask is, i also have the urd mkii ypipe and while i knew it would give the carven a different tone, i noticed in second gear if i get on the gas (not full on gunning it) the tone goes from low and bellowing to raunchy lol. if i gun it then the raunchiness gets drowned out pretty quickly till ultimately the intake growl takes over. im guessing cause the motor is under full load. other than that i like the pairing of urd and carven. sounds wicked while cruising, vicious when punching, and gurgly when downshifting. 🤘😎
worth getting to replace the quiet OEM stock exhaust?
@@dms14: after owning it for sometime, i do admit it sounds good. if youre looking for a nice thoaty tone then this should fit the bill. with all that being said, if your truck is equipped with a urd ypipe or you deleted your midcats then this exhaust is gonna be raspy as hell on the top end. i thought it would go away as time went on, but it did not. on the low end (below 3.5k) it sounds wicked, but im convinced that this setup was made if you kept your stock ypipe and you did not change out your headers or whatever it is they call them on this truck lol.
@@vettedsin thanks for your response man. And I just have all stock
Is an kmpact wrench needed for install for this exhaust? Could I get by with some socket wrenches?
You can get by with that but for secure fitment we recommend using an impact just so you have it in mind that its fully tight down.
would this sound similar on all toyota v6s? My wife wants to add a Carven muffler for her highlander V6 since she likes how the progressive series sounds on my Silverado, granted I have a v8 but she is really set on a carven muffler.
@@ajya462 she has the 3.5 sport XSE so she already has air bags and rims on order so now wants an intake and exhaust system. He hasn’t found a sound clip of a nice sounding exhaust other than the carven. I’m tell her to just do aftermarket tips to give the impression of an aftermarket exhaust and to leave it alone
Hey Pelon I believe going with our Carven_TR Muffler will do the trick. Might not sound like your Silverado but it will give her that aftermarket Exhaust Tone she is looking for.
hola amigos de carven,quisiera saber cuando estará listo el kit para Toyota Tacoma long box mi Toyota es del 2017.
It should be ready by the end of august.
Would you guys have to customize an exhaust for the Longbed Tacoma?
And if so, what city is this shop at?
We are located In Corona, CA. Unfortunately you would have to see if a shop around you or a ship you prefer can customize the kit.
Will any of your catback systems for 3rd gen Tacoma void factory warranty? Flowmaster has some cat back systems that will not void warranty.
None of our Cat-back Kits Void Warranty.
Couldn’t find it on your website but will this fit a 2017 Tacoma Access cab longbed?
Yes I believe you will need to go with our short bed kit but email me right now info@carvenexhaust.com
@@CarvenExhaust I emailed you guys!
Any idea the size and tread pitch on the 2 oem bolts? And for some reason my bolts are tac welded 😞
Your oem bolts are welded on?
As an old millwright, welder fabricator that has had a few eye injuries, I wish you would wear some eye protection, especially while using an impact wrench. Product looks and sounds great.
Maybe you'rejust Clumsy and shouldn't measure others by your standards or assume they want to listen to your opinion in the first place.
Do you need to have the tip on for it to sound like that? I am trying to achieve a more high clearance style for off-roading and would rather not have the tip sticking out far
You have the option to make the cat-back kit an axel back and dump it underneath the vehicle.
@@CarvenExhaust in order to do that are you just not adding on that last section of piping? And if so does the black exhaust tip fit on right there too? I don't see a specific option for axle dump on the website so just wondering if that's the option for us off-roading folks :)
I'm looking for a Carven dual exhaust for my 2018 Tacoma TRD sport
our cat back kit is only a single side exit but I have seen other tacoma owners do a true dual set up.
Getting this one for sure, does this fit the 2020 extended cab?
What size bed you have?
@@CarvenExhaust I believe it’s the long bed
Will this exhaust fit my 2022 Toyota Tacoma Trd off-road double cab long bed.
Yes it will
how does it compare to both MBRP's turn down and side exiting MBRP? I have the turn down MBRP and im thinking of another options as its too annoying for my tastes. thanks
everyone switches to carven after MBRP dude
Amazing!
I personally have not heard that cat-back kit but one thing I can tell you is this is the most sold product we have it is so hard to keep up with the orders and we have had gotten nothing but good news on this kit.
Will this system work for a 2010 Tundra Platinum?
No, not on a tundra.
What kind of a dumb question is that
Will you guys ever sell a turn down for 3rd Gen Tacoma in the near future?
Unfortunately not at the moment.
Love the exhaust system. Bummers no dealers in Hawaii..............🤙🤙🤙🤙🤙🤙🤙
No dealers but we do ship to Hawaii
I will definitely think about it. Cost wise it could be pretty expensive.
Message @rev_hi on Instagram, they will hook you up with this carven exhaust for a good price. You won’t regret getting this exhaust
Is there any discount code for preordering? Also, approximately when will they be in stock again?
Email us at info@carvenexhaust.com for a discount code!
I've had this for about 3-4 months now! Is there any disadvantage to removing the connection just above the rear axle for better clearance? Thanks guys!
Great question! Our kit is actually designed for both a tail-pipe exit and an over axle dump exit. no disadvantages at all its actually a great option for those that want high clearance and when getting after market rear bumper, tires and wheels.
How is the install? I just put on new headlights and looking for a aftermarket exhaust kit, this looks like the one imma get.
Install is a plug and play super easy we go in depth in this video on the proper way to install the cat back kit
Could I use the OEM Tacoma black tip instead of the Craven tip ?
We have not tested it but if it won't fit you can still have it welded on.
@@CarvenExhaust Thanks. Can you provide to me the part number for my 2023 TRD Sport 4x4 long bed?
@@wb4514 carvenexhaust.com/collections/2016-2022-toyota-tacoma/products/2016-2021-toyota-tacoma-cat-back-ceramic-coated-black-5-5-single-tip?variant=39270749929607 thats the link. Use code 12OFF for 12% off your order.
I have an I4 Tacoma and a muffler delete on it, and Its loud and I love that, but it sounds god awful because it’s high pitched. Any tips to make it still obnoxiously loud, but with a MUCH deeper tone?
Get a v8
Have you guys done any testing on performance gains if any?
Customers have messaged us saying they have seen in increase in HP and Torque.
@@CarvenExhaust by how much?
Sounds so good!! How much are these exhaust??
www.carvenexhaust.com/cat-back-kits/toyota/2016-2020-toyota-tacoma-cat-back-kit.html
Do you guys have a decibel rating? I’m just curios how loud it is.
We don't but we will defiantly make a video of this very shortly.
What size tip would i need if i run this kit as an axle dump? 2.5” or 3” ?
As in axle dump you will need a 2.5" tip.
Sounds good, I like it. But the real question I can't find on the site's item listing is whether or not it'll pass state inspections.
Its a catback therefore the catalytic converter is still in place so it should, unless your state fails for db’s.
It should. Your truck weights over that amount for a vehicle to be state ref.
Any plans to add a cat back for the 2nd gen tacoma? Or can this kit be used?
Unfortunately we will not also it will not fit.
@@CarvenExhaust well damn
Still loving the Carven exhaust. So much fun with manual transmission. Really wide range of growling notes. 😎 If you have a 2020 6 spd manual, I highly recommend this kit. More importantly, easy install, even without lifting the truck. Thanks again Carven.
Right on!
Good 👍🏼
Thanks for the visit
I have a 2017 TRD sport long bed, it’s the kit available for the long bed, if please let me know the link， thanks
Yes! kit is finally available and ready to ship
@@CarvenExhaust But in your website said longbed no available, do you guys noticed that? I wish I could get one, thanks
Just put this No 1 an only Thing I want 4 Christmas 🎄 U GUYS At ROCKSTAR 🔪🔥💨
Awesome!
Do you make a kit for 2017 Access Cab 2.7?
Unfortunately we do not.
I was looking on Extremeterrain.com and found an exhaust for a 2.7L Tacoma. But it’s for double cabs with a 5ft bed
Do you have a exhaust system that will fit a 2017 SR5 double cab long box? I checked the website and there's nothing specific on access cab/double cab and short/long box?
I dont think bed length matters but I could be wrong
@@carsongalaxy from other posts it says it fits fine on the 5ft beds but mine is a 6ft bed. I like the sound but if I can't get the info on it, I'm not going to purchase, have it shipped and then not fitting at all.
From past experience my 2010 civic si had its exhaust pipe cut (skunk2) because it originally fit the 4dr version mine was the 2dr.
@BMO I'm not worried about availability. The kit on website just says for a 2016-2020 Tacoma. On here people asked if it needs to be customized to fit on a 5ft bed. The answer is "no" from the manufacturer. My truck has the 6ft box so if there's nothing on site to customize it to what my truck is I'm not going to pay $500+ for a exhaust to not fit properly. Would you buy something that wont fit?
Unfortunately this kit will not fit the long beds. We are working on a kit for the long beds I know customers with long beds still purchasing this kit and all they did was extend one of the pips at a local muffler shop.
@@CarvenExhaust you caught my attention on the exhaust video so I'll wait until one is available. Thank you for responding back.
I ordered mine yesterday can't what
did you get it yet?
Do you even need a tip to run this as an axle dump and how does it sound in the axle dump congratulation?
This Cat-Back Kit is adjustable to be ran as a dump exit I know a lot of off road customers like to run it with a dump exit.
Will this fit a 2.7L 2020 Short Bed Double Cab Tacoma
Yes it will. but must be 2016-2021
Did you ever buy it? How does it sound ?
Hey is 2021 any different? I believe shouldn’t be? Pls let me know?
It will fit the 2021 Tacomas!
Is this thing already pre cut for short bed double cab?or u still have to cut? This sounds better than mbrp IMO
i just installed it on my short bed 2020 sport and it sounds great. I wanted blk tips but was sent polished. lol
Email us at info@carvenexhaust.com with your order number and we will send you the correct tip.
This kit will bolt on the short beds only not the long beds.
@@CarvenExhaust thank you for the reply, the issue was resolved from the vendor I bought it from.
Does this fit a 21’ Tacoma double cab 5’ bed
Yes it will, go with our Short Bed Kit.
Can I make this exhaust work on the previous generation Tacoma?
Unfortunately the way the bends are I believe the kit will not be able to work. Unless you know someone that can bend and weld then there is a possibility that he can custom fit it to your truck but with customizing the kit it will void your warranty of the product.
Sounds really good! I didn't expect that from a V6. Carven cat back exhaust made that truck sound great!
Glad you liked it!
@@CarvenExhaust yes definitely
I sure did
But the V8 tundra sounds so much better😘
It says that you guys have it back ordered. Do you know when you will get some in stock?
I'm changing it right now because we have about 50 kits ready.
Ok thank you
@17:31 for the sound clips
Any thought on a header to go with this exhaust?
Haven't heard a tacoma with headers on maybe someone on hear can help us out!
@@CarvenExhaust Because as much as I love this exhaust, it still sounds restricted to me. Which I just can stand to begin with. This is the biggest drawback to this truck in my opinion. Let’s let that 3.5l breath:)
Does the new long bed kit fit a 2016 Tacoma access cab ?
Yes as long as its a 2016-2021 Tacoma Short bed or Long bed it will fit.
Thanks ..after watching your other long bed Tacoma video I went ahead and ordered it !
I also have an important question. Does this kit fit the Longbed Tacoma’s or just the short beds?
Unfortunately this kit will only fit the short bed.
@@CarvenExhaust Damn! I was just going to order, but I have a long bed too.
@@CarvenExhaust Sounds great, but I'm also a longbed owner. What would it take to make this work? Just an extention?
@@BB-nn9en As of what we see yes. We have been getting a demand on the long bed maybe we might do a long bed version but not anytime soon due to we are R&D on other vehicles.
Does this fit 2019 double cab SR5?
Yes if it 5 foot bed
Can you run this without the end piece where it tucks under bed for off-roading purposes???
Yes Of course! what a great question! We designed the Tacoma and the Tundra Cat back Kits for off road use so you are able to remove the tail pipe section to run it as a dump and it will make a great sound while off roading!
Carven Exhaust Inc awesome thanks, ordering now. Thanks for replying back 👍🏽👍🏽