PCCooler RZ820

Поділитися
Вставка
  • Опубліковано 11 лис 2024

КОМЕНТАРІ • 52

  • @jackdaniels369
    @jackdaniels369 Місяць тому +1

    Excellent review as always. Thank you.

    • @KleoYan
      @KleoYan  Місяць тому

      @@jackdaniels369 hi ha and welcome back. Thank you very much for the support 👍👍👍

  • @Lawliet4896
    @Lawliet4896 17 днів тому +1

    now i can imagine this beast on itx mobo, damn stunning, i just done with an Assasin 4s with my itx build.

    • @KleoYan
      @KleoYan  17 днів тому +1

      Hi Lawliet Lim, welcome to my channel. Hmm if the ITX case allows to fit this in. Yes it will be as stunning as the Assasin 4s 😬

    • @Lawliet4896
      @Lawliet4896 16 днів тому +1

      @@KleoYan ya, cause I build open air

    • @KleoYan
      @KleoYan  16 днів тому +1

      @@Lawliet4896 I see. thanks for sharing your experience 👍👍👍

  • @jrwong2181
    @jrwong2181 Місяць тому +1

    Nice cooler good for all black build

    • @KleoYan
      @KleoYan  Місяць тому

      @@jrwong2181 hi and welcome to my channel. You are absolutely right. It will be stunning in a classic stealth black build. 😉

  • @BasTech
    @BasTech Місяць тому

    Woah! That is a massive aircooler!
    Living in Japan, I often see this brand (CPS) on display at shops, especially their cases.

    • @KleoYan
      @KleoYan  Місяць тому

      @@BasTech hi ya. Yup, it is massive. The picture on their web looks average but when I unbox it. I am like OMG SO BIG. Hahah cos I was only attracted by the 8 heat pipe and ended up shock with the size. I am new to this product but so far their products are well build. I have yet to play with their case but given the opportunity. I will 😬 by the way thanks for you info too. 👍👍👍

    • @dfbreyes
      @dfbreyes Місяць тому +1

      How does this compare with Scythe Mugen6 air cooler in terms of noise and temperature control? Can it handle AMD 7950x3d?

    • @KleoYan
      @KleoYan  Місяць тому

      @@dfbreyes hi and welcome to my channel, I am not able to compare with Scythe Mugen6, therefore unable to tell you the comparision on noise or thermal. As this content is based on a 7950X, which I am drawing at a wattage of 192W, therefore it is capable to handle your 7950X3D which is running at a low TDP compared to the 7950X.

  • @jamesdean-h1v
    @jamesdean-h1v Місяць тому +2

    Very interesting, I notice you are doing more unknown brand products. where did you get all these weird brands from? This is another good content, thank you Kleo.

    • @KleoYan
      @KleoYan  Місяць тому +2

      Hi james dean, welcome back and thank you for your valuable feedback. I was approached by PCCooler infact is CPS and I like exploring new options, so I took up the challenge. I am impress with the build quility of their liquid cooler the DS360 ua-cam.com/video/idbdzPF8gaU/v-deo.html and this aircooler got my attention, which has 8 heat pipes, so I was trying my luck and I requested it.

    • @jamesdean-h1v
      @jamesdean-h1v Місяць тому +2

      @@KleoYan I see, thanks for the explanation, it's good as many of us do not know these brands. more competition are always welcome.

    • @KleoYan
      @KleoYan  Місяць тому +1

      @@jamesdean-h1v Yup, I myself are looking into unknow products, who knows they might be good. It's like a treasure hunt adventure 🤣🤣🤣

  • @Demonoid1990
    @Demonoid1990 Місяць тому +1

    I may check this out, I like the design/aesthetic quite a bit. I would've gotten the Deepcool Assassin IV VC upon release, but they got sanctioned..😅
    I'm not too worried about the proprietary fan issue. Everything is fixable with some effort and/or improvisation. I could certainly see myself possibly modding in Super Flowers high CFM fans if need be.
    I'll probably search around and see if I can order this. Right now I'm just waiting for Intel 15th Gen 285k and RTX 5090 to hit the market.
    Another brand that intrigued me was Valkyrie. But unfortunately I haven't found any sellers here in the US that offer their larger dual tower cooler.. Though I do like their aesthetic as well.

    • @KleoYan
      @KleoYan  Місяць тому +1

      @@Demonoid1990 Hi and welcome to my channel. You are spot on with Valkyrie. I like their products too. Am trying hard to write in if they are able to sponsor some of their items 😂 as for the super flower high CFM fans. Yup, that will bring down temperature heaps. Btw where you from?

    • @Demonoid1990
      @Demonoid1990 Місяць тому

      I'm from the USA of course, in particular Iowa, the land of corn lol. But I'm also a CDL driver/operator, I drive truck and operate heavy equipment. Pays pretty darn good, and I'm single.. so I got plenty of spare funds for my "hobbies."
      I've been a hobbyist PC gamer for years, since my dad got me into it, and gave me my first system of my own running Pentium III and Win 98 lol. I'm not particularly a brand loyalist or specific to which country components come from. In the name of performance or aesthetics it's all fair game.
      If I have any bias it would probably just be Intel and Nvidia.(I'm optimistic about AMD though) After that the other components all depends on what I'm trying to achieve. Be it a specific level of performance, feature set , or a particular aesthetic approach.
      Be nice if some of these foreign speaking channel could offer up subtitles lol. Theres some decent Chinese and Asian reviewers here on YT but I can't understand a damn thing lol, except for the graphs, numbers, and product names/identification. At least math and numerical data is a universal language. 😅

    • @KleoYan
      @KleoYan  Місяць тому +1

      @@Demonoid1990 I see. It’s good to keep options to all kinds of components and as much as I am comparing with brands. I find that there are so many other pc components or brands done bring performance to the table. Just that alot are skeptic about the brand name. I choose the difference. I am a Chinese but to be honest, am use to speak in English or to write in English. There are indeed very good Asia reviewers but with not subtitles. I have no clue either hahah. 😂

  • @kamikaze00007
    @kamikaze00007 Місяць тому +1

    A tower cooler on a 7950X doing all-core at 87C with 5.1Ghz? That's some GOOD performance right there.

    • @KleoYan
      @KleoYan  Місяць тому

      Hi kamikaze00007, welcome to my channel, for your info, after I updated the bios, as you can see on the test itself from core 1 to 8 yes is over 5.1Ghz but from core 9 to 16 is at 4.9 ghz max. so is not all core to 5G, but still, this PCcooler AIO is impressive, as with the same settings, my Arctic Liquid Freezer II not III is doing 84 degrees, 2 more degrees higher. Neverthe less, thank you for your feedback.

  • @comrade490
    @comrade490 Місяць тому +3

    It would be cool if you could compare it to the nh d15 g2 or the phantom spirit 120se

    • @KleoYan
      @KleoYan  Місяць тому

      Hi Comrade, welcome back. I will see what I can do. thank you for your suggestion.

  • @cubancoffee
    @cubancoffee Місяць тому +1

    I hope this comes to the US since this would would be a nice replacement for the Deepcool Assassin IV which is no longer available here

    • @KleoYan
      @KleoYan  Місяць тому

      Hi Joe G, welcome to my channel. I believe it will be on Amazon soon. maybe you want to keep this page as a look out. www.amazon.com/stores/PCCOOLER/PCCOOLER/page/A0AF3FAD-141F-470C-BAE8-C7C5A54FD2FD?ref_=cm_sw_r_apin_ast_store_RH8GS9N18B45SDFZYP3Q&store_ref=bl_ast_dp_brandLogo_sto&dplnkId=83474c9f-5ad4-4ea5-ba2b-eea8e7eb9ad0&previous_lop=en_SG&dplnk=Y

  • @oldmanian
    @oldmanian Місяць тому +2

    Great video. The proprietary 140mm fan is a deal breaker and really a bad decision as it gimps the coolers life expectancy vs its competition.

    • @KleoYan
      @KleoYan  Місяць тому

      Hi oldmanian, welcome back. Yes, everything about this cooler is ok. the quality the fins stack the way it's design.. but like you said, the issue is that the fans are not replacable.

    • @comrade490
      @comrade490 Місяць тому +1

      Can't you just zip tie a new one lol?

    • @KleoYan
      @KleoYan  Місяць тому +1

      @@comrade490 hi and welcome to my channel. that can be a solution for the front if you want to ripped off the front fans, but for the center 140mm. even if you zip tied it.. it's still protruding and will hit the m.2 area.

    • @comrade490
      @comrade490 Місяць тому +1

      ​@@KleoYanmaybe you could cut the corners of the fan to make it look like the one of the cooler

    • @KleoYan
      @KleoYan  Місяць тому

      @@comrade490 well can do that but your fan frame will be weaken...

  • @MG0301
    @MG0301 Місяць тому +2

    Man, air cooler in the market (Except Noctua) look so much like Deepcool AK lineups and Assassin IV

    • @KleoYan
      @KleoYan  Місяць тому

      Hi ya MicerGlancer, welcome to my channel. Yup, it does look like the Deepcool AK Lineups and Assassin IV. As for no Noctua, I see what I can do and will try to request from them. Thank you for the suggestion 😉

    • @MG0301
      @MG0301 Місяць тому +2

      @@KleoYan oh yeah ID-Cooling have a Frozn Lineups air cooler look very cool and cheaper than Thermaltight. Hope they can send you 1 to review it

    • @KleoYan
      @KleoYan  Місяць тому

      @@MG0301 yup. I am aware of that too, am requesting it. Now is waiting for their reply. Thanks again for the suggestion 😉

  • @vita910
    @vita910 Місяць тому +1

    boss your description links some not working

    • @KleoYan
      @KleoYan  Місяць тому

      Hi Vi Ta, welcome to my channel. It may not work at your region and mind if I ask you to email me your country of original at godzylatech@gmail.com, I will ask CPS and will follow up with you through email. Thank you!

    • @vita910
      @vita910 Місяць тому

      @KleoYan ah I'm referring to the other links, specifically CyberCypher links. Very detailed review as always, covered all aspects!

    • @KleoYan
      @KleoYan  Місяць тому

      @@vita910 Hi thanks for informing me. Do pardon me, forget to update.. the company have changed it's name. you can refer to the below info and if you are in Singapore and need more enquires from CyberCraft Creation, join their telegram which I've listed for you.. once again thank you for informing me.
      CyberCraft Creation
      shopee.sg/shop/692746462
      www.lazada.sg/shop/cybercraft-creations
      Telegram - t.me/+21TJAnLHC7FlMzU1

    • @KleoYan
      @KleoYan  Місяць тому

      @@vita910 Hi again. now I have the full details as I have spoken to the owner of CyberCypher .. these are the changes.
      CyberCraft Creation
      www.carousell.sg/u/cybercraft.creations/
      www.lazada.sg/shop/cybercraft-creations
      shopee.sg/shop/692746462
      www.amazon.sg/s?me=ANRKGFMUG4FA8&marketplaceID=A19VAU5U5O7RUS
      Telegram - t.me/+21TJAnLHC7FlMzU1

  • @zzz-vd5rp
    @zzz-vd5rp Місяць тому +1

    The price of the cooler seems quite high, I wonder how it'll compare to the new nhd15.

    • @KleoYan
      @KleoYan  Місяць тому

      Hi zzz, welcome to my channel. I will try to write in for the Noctua DH-15 G2.. but no promises, thank you for your suggestion and to have visited my channel.

    • @zzz-vd5rp
      @zzz-vd5rp Місяць тому +1

      ​@@KleoYanI've been lurking around this channel for 6-12 months now. Thanks for making videos for these relatively unknown products.
      I also like the unique testing methods used in the mx6 vid, probably will still stick to mx4 coz mx5 was so sticky and always cause me to rip out the cooler together with CPU and cause me to have bent pins.
      I've seen so many local UA-camrs stop making content over this two years and I'm glad that you're still making pc related videos.

    • @KleoYan
      @KleoYan  Місяць тому

      @@zzz-vd5rp Hi ya, welcome back.. i am glad you like my content and yes MX4 or MX6, either one, which is my go to paste.. no point spend so much just for 1 to 2 degrees. there are other ways to cool down a system too, without spending additional cost. by the way my passion is still strong and if I ever part UA-cam, I will announce 😁

  • @bennyfeng95
    @bennyfeng95 Місяць тому +1

    not CPS, is CP3

    • @bennyfeng95
      @bennyfeng95 Місяць тому +1

      CP in chinese SPELL means OVERCLOCK

    • @KleoYan
      @KleoYan  Місяць тому

      @@bennyfeng95 Hi and welcome to my channel. I don't think is necessary to CAP your words and kindly first respect others, if you want to correct a person. You can talk nicely. as for CPS or CP3 hmm.. you might want to correct them then. www.cps-lighting.com/about-us/ or even here www.pccooler.com/ see top right hand corner.