I cant thank you enough for these videos! Im about to cut down my ‘74 F-100 and would have made a tremendous amount of extra welding and cussing without seeing what U did correctly. I have had a VERY hard time finding much info on the 73-79 frames especially with the width issues. If I’m ever in your area, I owe you a handshake and a beer, at the least! Love your videos and your comprehensive teaching! Please keep’em coming brother!
I have a stupid question. Can I get a short bed and just cut my frame to fit it? Or is frame on the short bed truck and long bed truck to much of a difference to swap the beds. One reason I can't just cut my bed is it's gone so I need to buy a bed and if I can just buy a short one that'll save me a step but if not I'll do the cutting and all Thanks
Could you briefly tell me how you shortened the bed itself, or point me to a link if you did video the modification of the bed itself? It appears you took everything from cutting the front and back? 1 cut, 1 welding seem? I'd really appreciate it
They are lowering it extremely low so they wanted to keep the two piece drive shaft because the one piece would rub the cab. We didn’t show it, but we did shorten the driveshaft per the customer’s request. We picked 1-1 1/2 inches behind the very first bolt hole for the bed bolt.
At least 16 - 16 1/2 inches. We cut this one but we advise you have a driveline shop be involved with that. You can do it yourself but you won’t be able to balance it.
@@thehousethatrustbuilttinma3608 I’m wondering what this cost because I’m looking for a’79 to replace my’79 F100 SWB that was totaled out and it’s easier to find LWB’s.
@@longshot5738 the cost is $2,000. That’s everything but cutting the driveshaft, I can cut the driveshaft but ca not balance them. It takes 5 days from start to finish, we shut our shop down the moment we start one of these until we finish to make sure all attention to detail is on the vehicle.
We are located in Valdese, North Carolina and we will have to go over our schedule to be sure when we could get it in. We usually have clients bring the truck in to drop off and at this point it will be the end of August to the middle of September to have it worked in.
I cant thank you enough for these videos! Im about to cut down my ‘74 F-100 and would have made a tremendous amount of extra welding and cussing without seeing what U did correctly. I have had a VERY hard time finding much info on the 73-79 frames especially with the width issues. If I’m ever in your area, I owe you a handshake and a beer, at the least! Love your videos and your comprehensive teaching! Please keep’em coming brother!
Great job! 👍 Wish you was closer to WV!!
You do good work, I like it.
Great job my friend!!! Like your channel
Great job where are you located
Valdese, North Carolina
I have a stupid question. Can I get a short bed and just cut my frame to fit it?
Or is frame on the short bed truck and long bed truck to much of a difference to swap the beds.
One reason I can't just cut my bed is it's gone so I need to buy a bed and if I can just buy a short one that'll save me a step but if not I'll do the cutting and all
Thanks
There’s no such thing as stupid questions. It should fit just fine as long as you do your measurements correctly.
Could you briefly tell me how you shortened the bed itself, or point me to a link if you did video the modification of the bed itself? It appears you took everything from cutting the front and back? 1 cut, 1 welding seem? I'd really appreciate it
Nice. U changed to a 1 piece drive shaft? What point did u pick to start ur 16 inches on frame? Thanks
They are lowering it extremely low so they wanted to keep the two piece drive shaft because the one piece would rub the cab. We didn’t show it, but we did shorten the driveshaft per the customer’s request. We picked 1-1 1/2 inches behind the very first bolt hole for the bed bolt.
Thank you very much, thats the info I needed. Great video
i have a 1972 f100 its a long bed might want it short bed i am in Nashville
We would be glad to help
Some of the other videos show shortening rear of bed????
Certain year models require we cut front and back and others only the front and that can change between makes as well.
Does your drive shaft angle or length change a bunch??
At least 16 - 16 1/2 inches. We cut this one but we advise you have a driveline shop be involved with that. You can do it yourself but you won’t be able to balance it.
That’s an awesome job you did sir. Did you just replace the molding strip on the sides?
P.S. I Subscribed.
We cut the ones on the side down. The ones on the bottom we offered to cut them but the client decided to buy a set of bottom trim.
@@thehousethatrustbuilttinma3608 I’m wondering what this cost because I’m looking for a’79 to replace my’79 F100 SWB that was totaled out and it’s easier to find LWB’s.
@@longshot5738 the cost is $2,000. That’s everything but cutting the driveshaft, I can cut the driveshaft but ca not balance them. It takes 5 days from start to finish, we shut our shop down the moment we start one of these until we finish to make sure all attention to detail is on the vehicle.
@@thehousethatrustbuilttinma3608 That’s very reasonable sir. Where are you located because I may be needing your services someday soon?
@@longshot5738 Valdese, North Carolina.
how much would this job go for?
How many inches are cut off the driveshaft? 16” as well?
Yes, 16”
Thankyou!
Where you from?
Question What's the cost for that type of job
$2,000 out the door.
Nice am excited where you located
How is your Schedule
We are located in Valdese, North Carolina and we will have to go over our schedule to be sure when we could get it in. We usually have clients bring the truck in to drop off and at this point it will be the end of August to the middle of September to have it worked in.
That sounds good. I just have to find a way to get the truck over where you are.