Tesla Model Y - Easiest DIY PPF for Front Bumper (Replacing Damaged PPF From
Вставка
- Опубліковано 9 лют 2025
- I have completely wrapped my Tesla Model Y with DIY PPF from @DriveProtected and it has officially paid for itself. After a #hondabump in Tucson, and an unknown object in Texas hitting an A Pillar, I had to replace some PPF pieces on our Model Y.
The great news is that the PPF did what it is supposed to do, it saved the paint on the Model Y. Instead of expensive paint repair, I only had to replace 3 panels of PPF, for a total cost of $531. This is a fraction of the cost of the paint repairs that I would be looking at had I not had PPF on the car to prevent major damage.
I had to replace the passenger A Pillar, drivers side fender, and the front bumper on our Tesla Model Y. While ordering replacement PPF, I asked for the newly released 5 piece front bumper from Drive Protected Shop, and I am very happy that I did.
In the past, I have installed 3M, Xpel and Defense Plus. This Defense Plus film is as thick, and comes with a 10 year warranty like the Xpel film. It also installs just as easily, unlike the 3M that is a much less forgiving film. My first bumper took 6.5 hours and the other 2 bumpers I have down to 4.5 hours. This 5 piece kit took me a shocking 1.5 hours to complete, which is significantly less time, and unbelievably easier than the 1 piece bumper kit.
If you have held off, or failed installing the front bumper PPF kit on your Tesla Model Y or Model 3, this 5 piece kit may be the solution you have been looking for. You can do this yourself, and save literally thousands by doing it yourself.
Get your DIY PPF kits at:
driveprotected... and use code BTG for 20% off your order!
Join this channel to get access to perks:
/ @beardedteslaguy
Follow us:
Twitter @BeardedTesla
/ beardedtesla
Instagram BeardedTesla
/ beardedtesla
Accessories
DIY PPF Pre Cut Kits Save 20% with code "BTG" driveprotected...
Floor Mats, 3DMAXpider use code BTGMAX for $10 off - www.formytesla...
DIY Ceramic Coat use code BTGCC for $10 off - www.formytesla...
Mattress use code BTG for $10 off - www.formytesla...
Hansshow Power Frunk use code BTG for 15% off - www.hautopart....
Matte Screen Protector - amzn.to/3o7IaLN
Clear Screen Protector - amzn.to/35bhD7E
Center Console Cover - amzn.to/31oIYlO
iPad Holder - amzn.to/2YLBbgZ
Mobile Connector Organizer - amzn.to/3iiUkOP
Car Seat Covers - amzn.to/2Vsc9kX
Phone and Glasses Holder - amzn.to/2IQcnzb
iPhone Charging Cable - amzn.to/3svnEG5
Roof Sunshade - amzn.to/3geCUVi
Filming Equipment
Canon M50 - amzn.to/3lqNfww
Sigma 16mm Lense - amzn.to/2SDHE9E
128 GB Pro SD Card - amzn.to/3nv242V
GoPro Hero 8 - amzn.to/38mwltO
GoPro Tripod - amzn.to/3dPO7GK
GoPro Media Mod - amzn.to/2YJlbMl
GoPro Suction Mount - amzn.to/3eI67UO
Microphone - amzn.to/2ZmZlgN
As an Amazon Associate I earn from qualifying purchases
If you are ready to order your new Tesla, don't miss out on your free 1,000 miles Supercharging by using my referral code - www.tesla.com/...
I have to say, i found this company thru your channel. Just placed an order....it hasnt even shipped yet but im super excited and more confident that i can do this just from interacting with Eric via chat. Think this will be great. Thanks again
You’ve got this! Remember, perfect results cost 2x+ what you just paid. It still does the job no matter how good it looks
I just tried purchasing ppf for my new 2024 Model Y but your code is no longer good. Bummer! Thanks for your amazing efforts! Love your informative videos! I love them all!?
Based upon your previous videos I did PPF on my 22 M3P. I made some mistakes, of course on my first time. The bumper is particularly difficult, so I'm glad there's an updated PPF cut to make it easier. That makes PPF by DIY a reasonable thing to do. We met at the Ocala Supercharger christening, where you demonstrated the mattress to me. I bought it and went on the Tesla camping trip at Cape Canaveral. I was extremely pleased with the mattress you showed to me. I'm a bigger guy at over 6 feet and over 250 lbs, yet I slept extremely well on the mattress in camp mode. I appreciate all your work. Also, I've rebuilt my Tesla seats in the model 3, I think will fit in the Y as well. The seats just were too tight and hurt me on long drives. I totally replaced the inner foam on both front seats. I retained the Tesla cover and electricals. It looks stock. It works extremely well for me. I have built a couple more for other owners. Now I'm trying to eliminate top of the window noise at higher speeds. I've reduced it greatly by adjustments but not yet 100%. Keep up all your good work, it is inspiring.
I remember you because you were so tall haha. I’m so happy to hear the mattress is working great for you, I spent a lot of time getting it right. Appreciate you
One can only expect that the Cybertruck will be even easier…. …can’t wait for those videos !
Haha. Probably boring video to watch a flat panel get wrapped
You make it look so easy, when I did mine and was squeegeeing over the fingers I ended up creasing them.
When that happens, just wet the surface of the PPF so your squeegee glides over the top
I pick up my 2023 MYLR 7 seater on Monday!!! I definitely need this.
Congrats! You’re gonna love it!
@@BeardedTeslaGuy I hope so! I have waited 12 months for it lol.
I'm expecting a MYLR7 next week too! Woohoo!
Thanks for sharing this. Glad to hear the PPF did it’s job.
Cheers
I thought pff should be done in a closed filtered environment? Amazing you did this outdoors! Great video
That would be ideal of course but I don’t have issues doing myself in the space I have
Just got a used 2020 Model Y. This gives me the boost I need to DIY my PPF. Thank you
I’ve been going commando for a while now, sans PPF. I picked up a stone chip below my license plate in my first month, so I’ve been thinking about it more and more. Thanks for the info.
Could you imagine paying $8k for a ppf wrap?! Seems like I could get a couple Tesla grade or better paint jobs at them at amount. This seems like a much more affordable solution.
For real!
I agree...the ppf industry has seen an uptick in sales over the last few years. Consequently shops have taken advantage of this and blown up the price 2-3x over what I paid just 2 years ago. BS that it's inflation, just people using that as an excuse.
Haha for reals. I'll just buy a new bumper every 2 years at that price.
Very interesting - are there any more before /after images of your Tesla after it was hit and then looking at the damaged area after you took the PPF off? Thank you so much!
no, I was lucky because the PPF saved the paint. There was no damage under the PPF at all.
Amazing! Thanks for the reply.@@BeardedTeslaGuy
Hey BTG! Thanks for the detailed video. I’ve chatted with Eric and plan to call him soon but I was hoping you could post your entire process. Washing, clay bar, what spray solution do you use, etc. After receiving a quote of $3000 to do a Full Frontal PPF from Xpel, I’m willing to go DIY for a 1/3 of the price. I have plenty of time and my Model Y is fortunate enough to sleep in my Air Conditioned Garage so, please provide as much detail on the process as you can. Thanks again. ( Love your videos and a happy subscriber of your channel)
Never mind. Found your first video. Thanks
Yea, I have several videos on the installs and they each have good detail on what to do. Best of luck on your install!
Hi do you have any videos on how to prep the car before doing the PPF??
I'm not afraid to install the ppf. I can't justify the cost when the ppf has to be replaced every 5-10 years. Unless I have custom paint, it's not worth the cost to protect. $2500 ppf... that's more than a full basic paint job.
I am just too scared to do it myself and thoughts of not being able to do it successfully is stopping me to buy it. I have tried washing it a couple of times myself but I do get some soap stains all the time. What do you think should be the right approach.
Really enjoy your videos. Question: I intend to put a vinyl license plate on the front of my Tesla Model Y. I also intend to cover the front in PPF. Should I put the vinyl sticker on top of or beneath the PPF? Thank you.
I dont know what the rules are in your state with renewing registration but if you have to put a new year decal on the plate every year, probably best to put it on outside
Did you see much dust, if any, from installing it outside?
yes, I get specs that show up during install. I get most of them while laying the film down, but I always miss a few
Did they stop providing PPF on 2023 models? I see ppf for sale on the website
dont know
Great video you made it look very easy.
Cheers
Any chance for the code to work now? I just purchased MYLR.
Thanks for sharing! Do you have a link to the new and easier to install 5-piece kit?
Driveprotected.shop. Code BTG20 gets you 20% off
Hi, excellent video. 👏🏻
I tried ordering the PPF and the code (BTG20) didn't work.
Do you have other code I could use?
1:10 did you need spacers to fit the induction wheels over the performance breaks?
Hi, I would love your guidance on getting a precut matte finish ppf for my black 2023 model Y. Tesbros only have clear DIY kit
Easy! driveprotected.shop use code BTG20 for 20% off. Eric is a great dude and fantastic customer service and quality.
Great job! You should oper your own shop.
Haha no time
Can you ceramic coat on top of this PPF? Are there any issues with the ceramic coating with the crease lines between each PPF segments?
question.
can you wrap the car after you've ppf wrapped it?
I have a matte white ppf and just wondering if in the future a color change can go over that ppf?
yes of course
Would you still recommend this PPF firm now?
I just traded in our 2022 M3 for a new MY and want to try this. Thanks
Absolutely!
Stealth grey with diy ppf. You are king of cheapskates 😂 love ❤
What brand of the PPF does DriveProtected carry? Is it Xpel?
Defense plus
This is really awesome BTG!… quick question, how do I prep the paint to install the kit? (Can’t find consistent indications on that)… car is brand new so do I just simply wash with plain soap and dry before starting?
Was with dawn dish soap. That’s it
@@BeardedTeslaGuy Same exact question. how did you prep your car before installing ppf?
Does the code still work cause I don’t see it working
Did you polish or wax car before applying the PPF?
no, you need to clean it down to bare paint. Cannot have a coating of anything on the surface or PPF will not adhere
I don't know i'm torn on doing the front bumper and hood on our new model 3. I wouldn't go for the multiple pieces because i don't like the idea of having all of the seams. And if you have to replace them every couple of years you'd almost be better off just having those parts repainted for about the same price in 5 years.
Highly recommended front end at least, where it’s most exposed
Hello, you mentioned you waxed it after? Not before?
You cannot wax, or ceramic coat before you apply PPF. The reason is PPF will not adhere to a waxed or coated surface. It needs the bare painted surface to adhere properly to.
What do you think about cutting the 3M precuts to match the Drive Protected multi cuts instead?
They jacked their prices up
I won’t be using 3M PPF again. It was so unforgiving and after using a film that’s actually workable, it’s night and day
The precut ppf on bumper was short in length and I tried to stretch on it but nothing happen. I gave up.
Email Eric, he will help you out!
Where do you get your solution for PPF
Are these films as good as the ones 3M or XPEL makes? The one that actually protected your car paint from damage was from XPEL. Not sure the alternatives fair any better.
Hey I hope I’m not too late lol what wheels are those?
Martian MW03s
what if any paint correction did you do prior to applying the PPF for 1st time and when replacing it? If you did paint correction what exactly did you use/do step by step? thanks!
You can use a clay bar if your paint needs it. I did not mess with it personally
when you order does it come with the fluids and spray bottle and squeegee ?
No
Another great video! Any advice on removing the existing PPF? I did my front bumper a year ago and it was less than perfect…. With this new kit I might peel off my old one and try again.
Hey Bob, Eric here from Drive Protected! Shoot me an email at info@driveprotected.shop, and I will share some details with you on removing existing PPF!
Yea peel it off slowly. Dump warm water on top of PPF before removing to loosen up the adhesive
Is my January 11th appt in Orlando still scheduled for my install?
Haha
Love this
Great video, thank you! I'm getting ready to use your code and get the front third, and maybe do the entire '23 Model Y if I survive doing the bumper/front, sounds like the multi-part bumper cut out will really help since I'm a first timer. I know you're experienced at this point and while watching this video, it seems like you are using a lot less slip and tack than I have seen in other vids. Specifically it looks like you are using the minimum possible slip and then mainly tack at the edges? Or is that just due to the editing, and you're tacking all coverage area? I've seen so many DIYers talk about next day bubbles and fingers and understand some will go away but others don't and wondered if it's a result of using too much and having surfaces too wet? Any guidance is appreciated and thanks again for this great instruction! Seems to me more than half the battle is not being scared to do it given the savings.
Yea, I am reasonably comfortable with the install now, but even if I was an expert, the multi piece front bumper would still be my choice...1,000% easier install. I try to use as little slick solution as possible. I only use it as a base layer, then if I need to adjust a piece, I may use some more. Everything else is tack. I tack all the corners, tack the whole panel if it is already lined up nicely, etc.
Will all those bumper PPF seams make it more likely that the PPF will peal in car washes, etc. with time since many more edges that may fray?
No, a Carwash won’t make PPF peel.
Do you still use the wall connector you built up with the 240V dryer cable? If so, how’s it holding up? I’m Thinking of doing that soon
Working great! It’s in a box right now as I set up another temp solution in the rental house. New house is done in a couple weeks and she will be proudly back on the wall
After watching your video, I installed 5 pieces bumper as well, but not very well for few weeks now. I have some fingers on the some edges and few compression marks due to over squeegee. I am considering removing it. Are you removing the ppf yourself? Are you using the hot water towel or steamer method? Or you suggest to ask prof to do the removal? Thank you for advise.
Does the PPF stick strongly to the body of the car?
How long will the PPF last and need to be replaced with the new PPF?
Should last several years. I did the 3M.. it took a lot of stretching on the facia like he said. I had a little fun since mines white (harder to see it popped up) and had a area dirt got in on a corner, but you can flush that out with more slip/tack solution and a q-tip. It re-applied and have the issue come back. So just takes a little babysitting as it dries to make sure the edges/corners stay down.
PPF adheres very strong to the paint. This one has a 10 year warranty, so at least 10 years life
@@BeardedTeslaGuy Thank you for your reply. How much did you buy 5 pieces of your PPF?
I saw that they have Matte finish! Unfortunately it’s $3K 😢even with the 20% off, I don’t think I can justify it…😢
Did you have to trim anything on the edges, or did it just fit properly? Any tucking required or overhang left over?
On the fender I trimmed a smidge on the door side. And I trimmed one overlapping section on the bottom of the bumper. Easy peasy
What did you choose for bumper on the site? Single piece or multi piece front bumper
This one is a multi-piece.
Wow..! I would love to do but my result won't be the same! So, did you do ceramic coating on top of the PPF? It would be nice to see a video of that!
Yes, ceramic goes on top of PPF
@@BeardedTeslaGuy thanks!
Hi, just was wondering where you at the Tesla dealership today in Orlando Florida I think I saw you didn’t know if it was you kind of scared to approach you 11/1/2022
You should have said hi!! I had accessories in the trunk!
Maybe next time 😞
I spent about 5K on a professional wrap. While overall, it looks pretty good, I’m disappointed in the very fine details. The biggest glaring issue? They didn’t properly wash the car before applying, and now there are strings of road tar on the left rear fender that are under the PPF. It looks horrible!
As a professional PPF installer and shop owner, this is grounds for a redo!
@@ericsawatzky54 for a bit of back story; I took the car to a Google reviewed, Tesla Owners Club sponsored shop in my state. When I dropped off the car, we spoke about my wants for PPF and tinting. They also knew what day I would be back to pick up the car. They would have 7 days to do the job, and were confident they would have it done a day early.
I kept an eye on the car using sentry cam all week, and the car never moved, day or night.
When I arrived 7 days later to pick it up, you’d thought they’d seen a ghost. They hadn’t done ANYTHING to the car. They said they would work all night on the car and have idly ready to go for me in the morning. (I was 6 hours from home, and had to work the next day at 1pm.
Over night, they got the PPF and all the tinting done, except the windshield. I had already prepaid half at this point. We agreed that I would come back the next week and they would do the windshield. I went ahead and paid them the balance due.
A week later, I came back, and showed up at 11am for a 12pm appointment. They were surprised I showed up so early. It was just an hour and I had zero expectations they would start it right then and there. They then wanted to charge me $500 to do the windshield. I told them that I’d already paid in full and that was already included in my payment. The guy disagreed. So I whipped out the text messages I had with the owner showing we had already discussed the plan and price. He disagreed again, so I stood up to walk out and he changed his mind and would do it “out of kindness.” So I let them do it. We went out, I pointed out issues that needed fixed, like edges coming up and how they cut around my Dual Motor badge to get it done fast. I had a new badge, so asked them to remove the PPF on the rear and replace with no cutout and out new badge on the film. I also pointed out the tar.
They replaced the price that is on the trunk to put the badging on correctly, but did not replace the fender that had the tar under it. The windshield looks good, except for a crease about an inch long right in front of the drivers view out.
Needless to say, I took my key after they were done and left. The owner texted a few days later asking how it looked and I told him about all the issues. He insisted they washed the car and would never have left tar on the car and filmed over it. I said I would send him pictures to prove it, since he thinks I’m lying about the tar. He got a bit defensive and wanted me to leave them a 5 star review because they worked all night to do the PPF the first time around, then claimed he gave me the windshield for free to make up for it. My invoice from them is not itemized, so you can’t tell what they charge for what, just says PPF & tint is $5,238. So, he claims I didn’t pay for the windshield, but can’t prove where each dollar went. But, if I leave him a good review, he says, “we’ll be good man.”
Like, what if I don’t leave a good review? Are you coming after me, claiming I didn’t pay for something? I have no way to prove what I did and did not pay for since he doesn’t itemize his invoice.
In the end, I had to tell him to not contact me again. I would not be bringing the car back for any corrections, I would not be leaving a review, and I would not recommend his business to any other owner looking for PPF or tint.
I plan to leave the film over the tar now that winter is coming, and I travel for work, so it won’t be February until I am home again to where I could pull it off and replace that bumper piece.
Really sad and unfortunate. If I had more time at home, I would have definitely ordered this kit and done it myself. Now, I’m stuck with what I’ve got, and have to see that nasty fender every day for the next several months until I’ll have a clean space where I can replace it.
@@EV_Trek_Adventures I am so sorry you had to go through this. The bare minimum they could do is give you your money back. Wow!!
@@ericsawatzky54 Thank you. I agree, money back would be nice, so that I can get some of that back and use it towards replacement cost. But, at this point, I don’t even want anything to do with them anymore, and I’m willing to just take a loss on the piece that still needs redone.
You should have them fix that
Wow. Such a good idea to break it into pieces. Is there a temperature requirement when installing it? I live in the Midwest and wonder if it’s too late in the season to attempt an install. As always great video.
Warmer temps are better, but I have installed PPF in both 30 degrees and 95 degrees.
Hey just wondering our Teslas bio weapon mode is gone from our AC controls and we’ve Ben searching for it on google and still can’t find any info
Ps we have a model y
Probably a software update to fix
What is the solution you are praying while doing the PPFF? Is it water or special solution or adhered solution?
There’s 2 solutions. Slip solution, which is distilled water with a little Johnson’s baby shampoo. Tack solution, which is isopropyl alcohol and distilled water.
I see that you have 18 inch wheels. How much does improve the range?
A few %. Biggest improvement was comfort in ride quality. Tires are way more plentiful and affordable also
What was your prep process like before applying the PPF?
Wash the car with water and dawn dish soap. Do not use any fortified car wash soap. You want a bare clean surface
@@BeardedTeslaGuy Thank you, I appreciate the content from your channel.
Very Nice!
Cheers
is there a white satin full kit?
Yes there is!
What brand of film does drive protected provide?
Defense plus
What are you using, just water and soap?
For PPF installs, yes
Following your recommendations, I did the front of my MY a year ago. MY like "my, does it look ugly!" Glad to hear that there's a new version, maybe I give it another try. Do you still mix your own solutions or do you use the official one?
Yep, mixing is simple!
Affordable? It’s insane how much a bit of plastic film costs!
Can i have the link where to order please
driveprotected.shop use code BTG20 for the 20% off
Thanks for sharing this! Makes it seem not so daunting! Did you do any paint correction before installing the PPF?
No, I’m good with the paint as is so didn’t do any paint correction
dang it code BTG does not work anymore
Did The guys car insurance pay for the ppf?
No, just general damage unfortunately
BTG no longer works. bummer
He's gonna need a kit for sensors and non sensor models.
We already have that option on our website.
Yep, he has that option now when ordering
@@ericsawatzky54 Do you have one for 2023 Model 3 RWD? I did not see it as option
@@justinchae1666 yes we do. Just choose the LR option. There’s no changes between any of the models as far as cosmetics are concerned.
Using the 20% code makes you ineligible for free shipping, am I right?
Not sure about that
Are you a fucking frontman from Revocation?🤘🤘
Haha no
Bruh it costs the same or less than a camry after fed and state credits I wouldn't worry about it, not worth all this extra money
😂😂
PPF is just a waste of money. Just clean the car, wash as needed and wax monthly. The paint will be fine.
It’s saved my paint quite a few times now
Wand only no touch car wash is the best way
Yea yea lol
$75 shipping on just ppl for the bumper and 30 for shipping protection and that's standard shipping 😂 what a joke
Ppf
I like eric and drive protected but their website is flat out lying and trying to scare you into buying the shipping protection. THEY are responsible for the package until it gets delivered to your house. They are NOT responsible for anything that happens after delivery. IF it gets lost during transit, THEY are responsible for making it right. If they do not, file a charge back and you will win. This is plain and simple.
Is this for real ?? I'll pass if it cost that much for shipping.
im sorry for all of you paying 8k for ppf, its not that expensive not for a model s or 3. model Y ans X are a slightly higher price. And that fender shouldnt take 30 minutes to install. thats a 3-4 minute install, bad tecnique, low quality, dirty install, wrong enviroment, not to mention stretch marks, silvering,bad alignment, no warranty. check your local shop, its better and not expensive if you value your vehicle.