For anyone considering this, I want to say that it intimidated me at first, but ended up working out just fine. I was scared by some other guides online that said to remove the entire logic board, but Newertech's suggestion of simply angling it a little is much easier. When I reinstalled the trackpad it was ever so slightly misaligned so I didn't get any haptic feedback. I was scared to death that I screwed up the ribbon cable, but carefully loosening the screws and realigning the trackpad ever so slightly cleared that right up.
I have not needed to change the battery just yet but I can say this is the absolute 'Best UA-cam Video' I have come across... Thanks in advance... I'll be able to do this with confidence now ;-)
This video is the best! You don‘t need any other guide. Here are my tips: - Always check that you use the right screwdriver - Some screws are very tight, apply a bit pressure on the top of the screwdriver for the first turn so you don‘t damage the screw. - Use pincers that are flat for flat cables - Lifting the logic board is kinda tricky, as in my case it didn‘t want to go as high as in the video, so you might need to lift it a little closer to the battery - You can use toothpicks to align the trackpad holes - and you can try to screw all trackpad screws just slightly and after that tighten them crossways so everything is aligned properly. - Under the left middle battery is a small white indicator which turns red when it comes in contact with water. I guess apple uses this to see if there was any water damage. Try not to get it wet or remove it if you ever send it to apple no one can claim you had a water damage. Alkohol and Acetone also activates the indicator - Use this as a chance to remove dust and grime
This video saved me when replacing my battery. It is meticulously explained, step by step, which didn't lead me to fail during the process. Thanks for helping me save $300!
Those of you wondering why take the trackpad out? There are openings exposing the circuitry and if you accidentally touch that while removing the battery, you can damage it. I just replaced mine without removing it because I was wondering the same, if I had to do it again, I’d remove it. Safer. Thanks for the video guys.
there are cutouts in the bottom shell that makes space for some chips on the back side of the trackpad. It is like to make sure you dont some how damage the chips physically when prying out the battery but also these adhesive removers may damage the trackpad as well
Does the battery come with any charge on it? I just replaced mine, plugged the USB-C in and its not starting up 😢 Im afraid of what has happened and hope im not going to have to regret taking on this task.
They should, however, it may drain enough before install that it needs a full charge for it to work properly. We would recommend charging it for a few hours and see if that helps.
I tried to replace the battery without removing the board..’i couldnt align it perfectly to get the cables out:( so had to remove motherboard completely
You would need to charge your battery fully before you can use the battery. We recommend if it is completely dead, to charge for a full day and then see if the computer turns on.
I am not finding that specific MacBook Pro Model number. However, this will work with both the MacBook Pro 16,1 and 16,4. If you would like to make sure your Mac is one of these, you can check the model identifier: 1. Click on the Apple icon in the upper left corner 2. Hold Option key 3. Click System Information 4. Second Line Down Under Hardware Overview is the Model Identifier (??)
This battery upgrade does recommend professional installation due to the difficulty. However, some find they are able to do this on their own. If it is not for you that is okay.
LOL never go to Apple to get their products repaired unless you wanna spend an arm and leg just for them to tell you to buy the latest model because yours is now considered "unrepairable"
For anyone considering this, I want to say that it intimidated me at first, but ended up working out just fine. I was scared by some other guides online that said to remove the entire logic board, but Newertech's suggestion of simply angling it a little is much easier. When I reinstalled the trackpad it was ever so slightly misaligned so I didn't get any haptic feedback. I was scared to death that I screwed up the ribbon cable, but carefully loosening the screws and realigning the trackpad ever so slightly cleared that right up.
I have not needed to change the battery just yet but I can say this is the absolute 'Best UA-cam Video' I have come across... Thanks in advance... I'll be able to do this with confidence now ;-)
This video is the best! You don‘t need any other guide. Here are my tips:
- Always check that you use the right screwdriver
- Some screws are very tight, apply a bit pressure on the top of the screwdriver for the first turn so you don‘t damage the screw.
- Use pincers that are flat for flat cables
- Lifting the logic board is kinda tricky, as in my case it didn‘t want to go as high as in the video, so you might need to lift it a little closer to the battery
- You can use toothpicks to align the trackpad holes - and you can try to screw all trackpad screws just slightly and after that tighten them crossways so everything is aligned properly.
- Under the left middle battery is a small white indicator which turns red when it comes in contact with water. I guess apple uses this to see if there was any water damage. Try not to get it wet or remove it if you ever send it to apple no one can claim you had a water damage. Alkohol and Acetone also activates the indicator
- Use this as a chance to remove dust and grime
This video saved me when replacing my battery. It is meticulously explained, step by step, which didn't lead me to fail during the process. Thanks for helping me save $300!
We're so glad to hear that the video helped save you some money and made the installation a smooth process!
I found this repair to be very manageable with the help of this video! Thanks!
You are welcome! We are happy to be able to provide the videos for our customers.
Best tutorial No doubt!
This is the best how to video for this model 👏
That's what we like to hear! Glad you enjoyed the video!!😃
Those of you wondering why take the trackpad out? There are openings exposing the circuitry and if you accidentally touch that while removing the battery, you can damage it. I just replaced mine without removing it because I was wondering the same, if I had to do it again, I’d remove it. Safer.
Thanks for the video guys.
there are cutouts in the bottom shell that makes space for some chips on the back side of the trackpad. It is like to make sure you dont some how damage the chips physically when prying out the battery but also these adhesive removers may damage the trackpad as well
Very useful thanks
hard work thanks
Worked!
Does the battery come with any charge on it? I just replaced mine, plugged the USB-C in and its not starting up 😢 Im afraid of what has happened and hope im not going to have to regret taking on this task.
They should, however, it may drain enough before install that it needs a full charge for it to work properly. We would recommend charging it for a few hours and see if that helps.
Same here, just waiting longer and crossing my fingers!! Been charging 30 minutes and nothing yet. Oh boy
This is a perfect video.. I changed battery of my MacBook Pro in less than two hours… apple lost revenue of $300 😄
I tried to replace the battery without removing the board..’i couldnt align it perfectly to get the cables out:( so had to remove motherboard completely
If my battery is completely dead and I can’t enter the code into the terminal what should I do? Thank you in advance
You would need to charge your battery fully before you can use the battery. We recommend if it is completely dead, to charge for a full day and then see if the computer turns on.
why is it necessary to completely remove the track pad instead of just unplugging it?
Because you could accidentally touch the chips or get adhesive remover on it causing the trackpad to short out.
Was wondering if this worked with macbook pro 2019 A2124 models?
I am not finding that specific MacBook Pro Model number. However, this will work with both the MacBook Pro 16,1 and 16,4. If you would like to make sure your Mac is one of these, you can check the model identifier:
1. Click on the Apple icon in the upper left corner
2. Hold Option key
3. Click System Information
4. Second Line Down Under Hardware Overview is the Model Identifier (??)
Will this work for the 13 inch?
does this work a A2141 2019 macbook pro
Hello Malik,
Yes, this battery is compatible with your MacBook Pro.
This isn't my cup of tea. I am visiting the nearest apple store
That is fair. A DIY replacement is not for everyone. 😊
What a hilarious comment to leave on an advanced Macbook repair video, what did you expect?
Where do u get the adhesive removed
Hi there, if you purchase the battery from us, the kit does come with adhesive remover.
this is why i hate apple lol. pc laptops are so easy to customize , upgrade, repair, etc.
🤐
agreed
@@poweredbyowc you🤐
Why does apple designed their products to be the least convenient possible
This is how they make the product so thin
It is too hard to replace a battery and will have a chance to damage the motherboard. Just give Apple money to replace for you.
This battery upgrade does recommend professional installation due to the difficulty. However, some find they are able to do this on their own. If it is not for you that is okay.
LOL never go to Apple to get their products repaired unless you wanna spend an arm and leg just for them to tell you to buy the latest model because yours is now considered "unrepairable"