Motor Guide Pinpoint GPS Upgrade Kit | How to Install
Вставка
- Опубліковано 10 вер 2024
- Learn how to add Pinpoint GPS to your MotorGuide Xi3 or Xi5 Trolling Motor.
This Upgrade kit will give you all of the GPS features like Anchor Lock, Heading Lock, Jog and Cruise Control.
To purchase the Pinpoint GPS Upgrade Kit, Click the Link:
trollingmotorp...
Already have Pinpoint GPS and need to replace your GPS Module??
The links are below for the Pinpoint GPS Module and our replacement video.
To purchase the Pinpoint GPS Module, Click the Link:
trollingmotorp...
To see our Replacement Video on the Pinpoint GPS Module, Click the Link:
• Video
Check out our channel for other Quick Tips, Repairs and Reviews.
Thanks for Watching!
If this video was helpful, remember to give it a like and please consider subscribing!
**New videos coming soon on other repairs, maintenance and tips**
Website: trollingmotorp...
Disclaimer:
Due to factors beyond the control of TrollingMotorParts.com,
We cannot guarantee against improper use or unauthorized modifications of this information. TrollingMotorParts.com assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. TrollingMotorParts.com recommends safe practices when working on motors, boats, wiring and or with tools seen or implied in this video. Due to factors beyond the control of TrollingMotorParts.com, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result.
All do-it-yourself projects entail some risk, it is the sole responsibility of the viewer to assume this risk.
Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not TrollingMotorParts.com.
Thank God for you guys I mistakenly ordered the wrong trolling motor . Luckily I came across this video and your website. You guys got this part right out to me and being able to see it installed made it doable for me and my limited mechanical ability.
Thank you so much.
Matt
I don't think this is uncommon. In the description they mention GPS this and GPS that but in very small print they say "(not included)". That should be bold and at the top.
I looked at the Garmin owners manual, and the picture of the GPS wire routing at the base was, uh ... not clear to say the least. Your instructions were clear, concise, and the video was done in a well lit area. THANK YOU.
Great video! A lot easier than the horrible black and white pictures in the manual. Thanks..
Too I ordered from y'all last week and I had no clue y'all had a yt channel. Just wanna say thanks for the quick shipping time easy to use site and for the sticker it got slapped on instantly
I have an older XI 5 with GPS. Is there a way to calibrate it ? When using anchor mode it can drift off by as much as 10 yards or it is constantly jerking the bow of the boat worse than a misbehaving kid in a grocery store by his “ play no games grandma “
Might be a stupid question. But what does hooking it to the gateway do. I just installed and have a gateway on boat. Just need an extension to reach it.
Is this an upgrade for one with gps already or is this an add on for motors with out gps spot lock.
Great video! I have a question- does the pin point system need to be hooked up to a NMEA network for the anchor lock and heading lock function to work? Or will those functions work if it is Hooked up as shown in this video?
The Pinpoint GPS Upgrade Kit will add the Anchor Lock and Heading Lock feature to the motor. You can control that through the Remote and Foot Pedal.
The NMEA 2000 Network and NMEA Gateway is only needed if you want to link your motor with a Lowrance Graph.
I just got my xi3 gps trolling Motor 12 v 52 lb thrust, at first install me and my wife took it out never had the gps light come on, operation of the trolling functions via regular speed and turning work flawless from the remote was very disheartened. Got home took the top panel off made sure the placement was correct, it was. Removed the bottom panel found the bottom connection was disconnected, I thought okay! Easy enough I reconnected, applied power to the trolling motor waited a couple minutes and no gps light ever illuminated, does it really take 10 minutes sometimes to pick up a gps signal or is it pretty quick? Any tips and advice, I’m a mechanic who has had many years of all sorts of electrical diagnosis, so any competent testing is not an issue getting pin readings etc. only reason I’m asking on here is I love the videos very easy and to the point the weekend motorguide technical support is closed figured if you had any input before I contact them Monday. Figured I’d ask and see in your experience if you have had other units do the same thing.
Thank you!!
hi i have the same problem. did you ever fix?
@Los Angeles BFS yes I did, after getting home, I popped the cover off the base of the trolling motor, and found were the GPS is at the base it was actually unplugged, I plugged it in turned the trolling motor on lowered it down in its deploy position and within about a minute from that point, the GPS light kicked on its located in the BOTTOM PANEL that's where the GPS is plugged in at the box of course is mounted in the top section but the wires run down and plug into the the base section/bottom panel I found out it needs to be in the deployed position for it to kick on the GPS when it's stowed it seems it goes into a sleep state almost same as if you don't use the remote and motor it goes to sleep to save battery and what I did while connected to the trailer powered on in the deploy position I drove it down the road and in a circle about 2 times per the calibration method and bam it kicked on
I hope that helps and yours gps is just not fully connected and you gotta calibrate it while "deployed" did it all while on trailer and drove my truck in circles haha
@@Tonys2Toxic thank you so much brother!! i will look into this right now!
Thanks for the video. Do you know if this kit will work for my older MotorGuide 8M4000137 wireless series trolling motor?
my ix5 dose not have a control panel will the up grade work
Do you need this kit if you just want the anchor mode? Or can you just get the new fob
Need the kit
@TrollingMotorParts I just got a boat that has a motor guide pro series 4300 on it, can this kit be installed on that as well or is there a different gps for that model?
Do you have to buy the pinpoint gps module and the remote or can you just use the remote only?
I’ve now been sent two of these. Both have been defective and never acquire a a signal pretty disappointing
Can anything like this be installed on a W55? It seems like it should be able to, but I don't see anything that explicitly says that.
Ever find the answer to this?
Is there a cable replacement for this GPS i can buy? Both my curly cables are degraded and i think the smaller one finally made my GPS not be able to get lock (unless the GPS died.. i'm not sure). I can find the larger cable replacement but not the smaller one unless its connected to a GPS unit itself.. .but i just want to replace the cables.
The main Coil Cord can be replaced.
The small Coil Cord is part of the GPS Module, so you would have to replace the entire Module.
@@trollingmotorparts Thanks for the info. i was afraid of that. This is a ridiculous flaw in the design. I'll have to spend half the p rice of a new unit just to replace a bit of wire. What a joke o fa design floor MotorGuide. I'll look into modding it myself and pray its possible.
I'm a little confused when trying to find the right products online. I have an xi3 wireless but just want spotlock/anchor. Isn't pinpoint gps separate from spotlock? I simply just want spotlock not where it can hook to my Lowrance. Any help would be awesome, thanks!
If you’re just wanting to add spot lock to an Xi3, this is the kit you would need. Spot lock runs through the Pinpoint GPS Module.
Connecting the Xi3 to a Lowrance Graph would also require NMEA 2000 and the Pinpoint Gateway.
@@trollingmotorparts Thank you! I appreciate it!
So i have an XI5-80FW 24V 54"SHAFT WILL THE GPS PINPOINT UPGRADE WORK ON THIS MODEL ITS A 2016 MODEL NEW IN THE BOX.
Yes, it fits all MotorGuide Xi5 models.
Why is that module so expensive?
@Trolling Motor Parts I have an opportunity to purchase a Motorguide Xi5 Trolling Motor-105FW 54in 36V at a decent price but it only has built in Sonar. I assume by watching your video I can purchase the module from you and install it. Do all Xi5's come with the indicators, etc all that is missing is the module?
Yes, this kit is all that is needed to add Pinpoint GPS to any Xi5.
How long does it normally take to ship just bought one and didn’t have this installed but said it did looks like I’ll be placing a order.
We have them in stock. They usually ship within 1-2 days.
@@trollingmotorparts I already made an order brotha under my girlfriends name and card super excited to get this part
Hello Trolling Motor Parts team, if I have a X3 not a Xi3, could I install the Pinpoint GPS kit? or is there a way to get pinpoint for a X3?
Unfortunately, Pinpoint GPS is only available on electric steer models like the Xi3, Xi5 and Tour Pro.
@@trollingmotorparts thank you for the quick response. are you guys aware of any other aftermarket system that could be added to an X3 that would provide a similar spot lock type of functionality?
Will this work for the kayak version of the xi3?
Yes, it will!
Can you please check email. I made a mistake on my order. I needed the gps module with the remote. But ordered the one without. Please cancel. Thanks!
Can this motor be used for autonomous boat for a trip from Japan to Canada? Do the waypoints have a distance limitation?
Excellent job!! Do you sell all this?
Yes, we do!
trollingmotorparts.com/motor-guide-pinpoint-gps-upgrade-kit-xi3-xi5/
How would I hook this up to my helix 5 fish finder for GPS
Unfortunately, Pinpoint GPS can’t link to a Humminbird.
It can only link to select Lowrance Units through NMEA 2000.
@@trollingmotorparts so would I be able to use pinpoint gps without fish finder
How do we track our packages after you have ship I don’t have any shipping info just says shipped. Information would be greatly appreciated it’s under brittney Johnson’s name. Let me know brotha the statues of my package
The package under Brittney Johnson's name shows it was ordered March 20th. It shipped out on March 21, and shows it was delivered yesterday, March 25th at 5:52 pm. Your tracking information has been emailed to the email address provided with the order. If you have any other questions, please contact our Customer Service Email:
service@trollingmotorparts.com
@@trollingmotorparts awesome thank you I received my parts and will be putting it on tonight with the help of your video thank you for the conscience of ording from your company not to long of a wait great service thank you