Yes coatings can be applied on windshield and headlights also, but there are different variants for each surfaces, Paint coatings are not suitable for windshields, Happy Detailing.
Thank you for your query. Cutting compound is used before Ceramic Coating application. We are listing a few cutting compounds :- 1. www.autofresh.in/e1500-polishing-compound-heavy-1-ltr-934 2. www.autofresh.in/scholl-concepts-e1200-extra-heavy-cut-compound-1ltr 3. www.autofresh.in/s3-gold-xxl-rubbing-compound-1-kg-930 4. www.autofresh.in/rupes-rotary-coarse-compound-1-ltr 5. www.autofresh.in/s20-black-real-1-step-compound-1-kg-931 6. www.autofresh.in/rupes-da-coarse-high-performance-cut-polish-compound-250-ml
AS: Selection of compound depends on condition of car and which grit of sanding paper used, in most of the cases Coarse or Heavy cut compound is needed which is followed by fine cut compound or polishing compound.
www.autofresh.in/detailmax-prewipe-precoat-cleaner-100ml Using a pre-wipe cleaner will help to clean the surface properly before applying anything else.
No, you can not, as such polishes which contains silicone should be avoided before application of ceramic coatings. Even if you use polish which has no silicone, ipa wipedown is still needed.
Hello Sir , would you please answer which grit size sandpaper you have used in this video and if Sander machine is not there then can we do hand sanding. Thank you
After compounding, 3000 grit compound is good to use as polishing step. Scholl concepts S3 Gold is one of the best fro compounding and after that Scholl Concepts S30+ is one of the best as Polish. Happy Detailing.
Thank you sir for responding. It is an illusion that the second coat dries faster than the first but the second coat is mainly to buff up the first coat, For more technical explaination please connect at +91 99240 04567 / +91 99247 50111
Paint correction is high end PRO job, shall not be possible to perform by hand and get even satisfactory results, even some detail shops are not able to perform good quality paint correction though they have machine and experience. We would strongly suggest to get your car detailed by good reputed pro detail shop in your area. Happy detailing.
Yes, ceramic can be applied on headlamps and trims, in most cases the coatings for the paint is not suitable, there are special coatings for trims, but all the top or gloss coat for paints can be applied on headlamps.
Depends, if condition is very good maybe sanding and aggressive compounding can be avoided, all boils down on what all defects you have on panel to panel, one can only decide according to condition of paint, Happy Detailing.
thank you soo much sir for sharing most helpfull video for ceramic coating..what is sanding?how to work ?which machine & pad used for? which brand chemical used for sanding?
Sanding is done before compounding to level the clear coat from deep swirls/scratches or defects, no chemical used in sanding, only (abrasives) sanding paper or sanding discs with water is used to do wet sanding, its a pro job, you can use a sander or 12mm random orbital also for wet sanding by machine.
Sir, maine abhi abhi showroom se bike purchase kisi hai.. And i want to do ceramic coating... So process will be the same like sanding waxing coating ya fir just water washing and applying ceramic coating will be ok... Be suggest on newly showroom conditions of vehicle.
There are many ceramic coatings formulated for India like climates which just do not need any artificial heating to cure, natural curing works best in our environment.Happy Detailing.
Hello, Ashwani yes we do provide detailing training. For more detailing training information. Please talk to our expert on the given number +91 95862 99696 / +91 99240 04567
Sir mai Saudi me abhi aya hu idhar start karaha detailing ka idhar 6 mahine full thandi hoti hai aur 6 mahine full garmi. Tu idhar mai kaunse product use karo . Reply me
Every ceramic coating needs Maintenance, top coat needs to applied every year after decon wash or light polishing as what is needed on car as per its condition. Happy Detailing !
As such it may vary from coating to coating, generally for any good company coating, one car take out the car in rains after 2 to 3 days, in some brands of coatings it may be 5-7 days also.
Sure, I have 2 questions: 1) Is 3 layer coating required 2) How can one identify or test whether the ceramic coating is applied or is it only a polishing done by service centre Thankyou in advance
Generally Third layer is like top coat which gives extra smoothness, gloss and hydrophobic, but last around 6-9 months in Indian conditions, the real protection comes from the hard base layer, so it depends on your need whether you need the third top layer or not ! Generally it is included in price of coating services so no harm having extra third layer / Top coat. For consumer It is tough to identify on first day whether ceramic coating has been applied or not but after few days one can test its performance by doing tiny sanding/compounding on test spot at non dominant part of car, the hardness of coating will resist the cut, again this is tough for consumer, only a professional technician can identify. If someone has such trust issue on service provider, it is highly recommended to get ceramic coating from trusted and branded store who use reputed brand of coatings, ask them to apply in your presence, collect the empty bottle and box with proper invoice and warranty card with all the details mentioned. Happy Detailing
Sir, there are two ways to apply Ceramic Coating:-
Option 1 - If you want to apply base coat once, you apply the base coat and then after 10-12 hours you will have to apply a top coat. Option 2 - If you want to apply base coat twice (2 times) you will have to apply base coat once and then after 3 approximate hours you will have to apply another base coat and then top coat after 10-12 hours.
@@AutoFreshIndiaOfficial Thank u for the reply. I wanted to ask that there are ceramic coatings of 30 ml that can do couple of coats on 1 car that cost you 3-5 k but there are other coatings that cost like 10k . which one should we choose and is one better that the other or its just the branding
@@aamir4u100 Brand to brand and quality to quality the product differs, In ceramic coatings though product quality is extremely important but application is equally important. If one errors in application even better quality product/brand will not last. I suggest to choose a good reliable trusted brand of coating and equally important the studio which will apply it for you. Application is the KEY, don't underestimate it. Happy Detailing.
We compound/polish to remove defects, in this process some polishing oil is left over the surface, to ensure nano coating is properly applied we need to pre wipe and remove them, rgds
After you loose the first time one, poorly applied or inferior products may just last few days, pro applied high quality product may last few years, that is why its highly recommended to get your ceramic coating always done by good professional detailer who uses product of high reputed brand, Happy Detailing.
With sanding or even compounding some microns of clear coat shall be leveled out, there is always fear of removing the clear coat while sanding, one has to be careful and use right equipment with right product with right technique and skill. A Pro detailer shall be always precise in his skills and will not remove the full clear coat. Happy Detailing.
Detailmax Pre-Wipe cleaner is suggested, IPA solution for wipedown needs to be powerful enough to clean all the polishing oils, it depends a lot on what company compound and polishes you have used, how much qty of compound you have applied, how much heat you had generated with polisher (by excessive heat you can drag the polishing oils deep inside the pores of clear coat) So you need to do the test panel with zero dilution and 50:50 to check what is working, its very difficult to give generic answers how much dilution to IPA or in many cases even pure IPA does not works. So for best results just follow the system, use Pre-Wipe cleaner from good company who makes it for the exact purpose.
Thank you sir i am the applicator of ceramic coating your video is very useful for learning and you have explain the complete procedure rightly.
Happy Detailing
What a description
Brilliant job done 👍
Happy Detailing.
Hi sir, thank you for the videos. Can you please tell what is the difference in ceramic coating vs graphene coating. Is the application same for both
Very well explained. Can we apply it to windshield and headlight.
Yes coatings can be applied on windshield and headlights also, but there are different variants for each surfaces, Paint coatings are not suitable for windshields, Happy Detailing.
Which grit sand paper should we use for sanding in this process you sugested ?
2000 should be enough !
Aapke video se bahut Kuchh sikhane Ko Mil Raha Hai Sar👍👍
Thank you for liking our videos 😊
Very simple and detailed explanation of car 🚗 detailing n I m learning it a lot from 🇵🇰👍👍👍
Happy Detailing.
Very nice video. How to remove hard water stain from the body as well as the glasses?
Compounding can easily remove hard water stains from painted body and chemical called hard water stain remover works on glasses. Happy Detailing.
@@AutoFreshIndiaOfficial Thank you very much. Appreciated it.
Sir which compound is used before cermaic coating apply cutting Or polishing?
Thank you for your query.
Cutting compound is used before Ceramic Coating application.
We are listing a few cutting compounds :-
1. www.autofresh.in/e1500-polishing-compound-heavy-1-ltr-934
2. www.autofresh.in/scholl-concepts-e1200-extra-heavy-cut-compound-1ltr
3. www.autofresh.in/s3-gold-xxl-rubbing-compound-1-kg-930
4. www.autofresh.in/rupes-rotary-coarse-compound-1-ltr
5. www.autofresh.in/s20-black-real-1-step-compound-1-kg-931
6. www.autofresh.in/rupes-da-coarse-high-performance-cut-polish-compound-250-ml
AS: Selection of compound depends on condition of car and which grit of sanding paper used, in most of the cases Coarse or Heavy cut compound is needed which is followed by fine cut compound or polishing compound.
Thank You Ankur Sir good initiative as a mentor now 👍
Appreciate, Happy Detailing !
Thanks for detailed video. Can you suggest which product is used as per cleaner or nano based ipa or degreaser
www.autofresh.in/detailmax-prewipe-precoat-cleaner-100ml
Using a pre-wipe cleaner will help to clean the surface properly before applying anything else.
Assam me kon sa mohina me CC korna better hoga??
All months are good, no adverse effect or extra benefit in any month.
Can we apply ceramic coating directly on amway silicone glaze polish without ipa wipedown??
No, you can not, as such polishes which contains silicone should be avoided before application of ceramic coatings. Even if you use polish which has no silicone, ipa wipedown is still needed.
@@AutoFreshIndiaOfficial okay sir...
Very well explained Ankur ji , thank you so much
Happy Detailing.
Thanku for ur video .it's very useful to learn 🙏🙏👍👍 great job
Thank You.
Hello Sir , would you please answer which grit size sandpaper you have used in this video and if Sander machine is not there then can we do hand sanding.
Thank you
Yes, You can do hand sanding. But because of uneven pressure we recommend to do sanding via machine. We use 1500 & 3000 sanding paper.
Sir after compound which polish will use.plz rply
After compounding, 3000 grit compound is good to use as polishing step. Scholl concepts S3 Gold is one of the best fro compounding and after that Scholl Concepts S30+ is one of the best as Polish. Happy Detailing.
All your videos are amazing...can you please recommend if a ceramic coating is required on new car or better to do after a few years..
AS: Its recommended on new car asap, but if you miss the bus, you can do it whenever you realise the need, sooner is better.
@@AutoFreshIndiaOfficial thanks for responding
Very informative,thankyou autofresh.
Glad it was helpful! Happy Detailing.
Great Job sir…..can you share some details about sander and sanding discs….which one are you using?
12mm orbit DA polisher is used for sanding with 1500-3000 grit of sanding discs, rgds
Very Informative Video Thank You Ankur Sir
Thank you for your valuable feedback 😊
Can ceramic coating can be applied in matee finish paint?
Yes can be applied.
Sir apki konsi jagah showroom hai coating ka
www.autofresh.in
we are online store for b2b supplies of premium detailing products.
Happy Detailing
Have you supplying the whole kit to do the coating at home
Yes, kindly visit www.autofresh.in for more details.
Sir aap konsa compound use karte hai ??
Rupes Coarse compound; DA Coarse with DA machine, Rotary Coarse compound with Rotary machine
@@AutoFreshIndiaOfficial than u sir
@@kuldipshondik8188 You're welcome. Hope we helped you with what you needed.
@@AutoFreshIndiaOfficial sir is there any other cheaper alternative??.
Sir why 2nd coat is evaporate & dry faster than 1st one
Thank you sir for responding.
It is an illusion that the second coat dries faster than the first but the second coat is mainly to buff up the first coat,
For more technical explaination please connect at +91 99240 04567 / +91 99247 50111
Is this tiny bottle of ceram coating enough for urban SUV or Hash backs??
Plz guide
No, you need bigger one, regards
ua-cam.com/video/SRSUgF6csag/v-deo.html
This video should solve your doubt
Can we do paint correction by hand as I don't have machine and no experience with machine either
Paint correction is high end PRO job, shall not be possible to perform by hand and get even satisfactory results, even some detail shops are not able to perform good quality paint correction though they have machine and experience. We would strongly suggest to get your car detailed by good reputed pro detail shop in your area. Happy detailing.
Very well explained. Thanks.
Thank You!
Can we apply ceramic on car headlamps, black trims.
Yes, ceramic can be applied on headlamps and trims, in most cases the coatings for the paint is not suitable, there are special coatings for trims, but all the top or gloss coat for paints can be applied on headlamps.
Useful video. Thanks 😊
Welcome 😊
Very good elaboration. Even better than English videos.
Great Video sir, Would you please share steps from Brand new car. Do we have to perform all the steps or can we just go with the ceramic coating?
Depends, if condition is very good maybe sanding and aggressive compounding can be avoided, all boils down on what all defects you have on panel to panel, one can only decide according to condition of paint, Happy Detailing.
@@AutoFreshIndiaOfficial Thanks sir.
Superb. Thanks.
Very informative video 👍👍
Thanks a lot
thank you soo much sir for sharing most helpfull video for ceramic coating..what is sanding?how to work ?which machine & pad used for? which brand chemical used for sanding?
Sanding is done before compounding to level the clear coat from deep swirls/scratches or defects, no chemical used in sanding, only (abrasives) sanding paper or sanding discs with water is used to do wet sanding, its a pro job, you can use a sander or 12mm random orbital also for wet sanding by machine.
@@AutoFreshIndiaOfficial are sanding discs available in your website useful for this purpose?
Can it be done diy?
Yes available, kindly visit www.autofresh.in
Sir ham wax polich k bad hybred ceramic spr use kar sakte h
Yes after 24 hrs of hybrid polish and wax, you can apply hybrid spray coating.
Very informative concept.. tq so much sir.. Sir can u please share a complete video of Detailing process from washing to applying ceramic coating ❤️
Will upload soon 👍😊
We are waiting for this
@@UrbanMitra Your wait will be worth it!
Witch brand of ceramic coating should be useful in new black car...
superb sir.
your training is very worthfull.
Can you please send a link for all required products ??
Sure, here you go - www.autofresh.in/ceramic-coatings
super and one video for ppf steps and explain
Sure, noted, Happy Detailing.
Will i get certificate after training?
Yes.
Thank you for providing information
Do you provide training for aspirants before opening detailing centre, kindly reply
Very helpfull information sir.. Thankyou.
Thank you for your valuable feedback 😊
Sir, maine abhi abhi showroom se bike purchase kisi hai.. And i want to do ceramic coating... So process will be the same like sanding waxing coating ya fir just water washing and applying ceramic coating will be ok...
Be suggest on newly showroom conditions of vehicle.
Sanding & compounding may not be needed if there are zero scratches and defects, wash, clay, prewipe (ipa cleaning) and apply coating.
What for new cars ?? Sanding is mandatory ?
Avail, sanding depends on the damage on the car's paint.
Sir Menzerna compound brand can used for detailmax ceramic coating?
Menzerna compound can be used instend of rupes compound? Its possible or not?
Yes can be used, rgds
Yes you can, rgds
Yes you can.
How long we have to wait for buffing after removing excess, as you have mentioned we have gently wipe to remove excess.
After removing the excess, buff to shine immediate by other microfibre cloth, no waiting. Happy Detailing.
Is Ultramaxx ceramic coating durability is 5 years .. will it really last it's shine and properties ?
Yes that's the life expectancy with proper maintenance, like any other ceramic coating this also requires maintenance, at least once a year.
where is your workshop ???? in which state
Hello Sir, our workshop is in Surat, Gujarat.
Waaata a man🎊 Really well explained, Great work sir🙏 Ty, please do suggest me which is best for i20 elite Super ceramic Coating or Turtle Ceramic?
I would go with trusted brand then any unknown one !
@@AutoFreshIndiaOfficial Yes suggest me one
@@vishwakumar07 TurtleWax is very well know and trusted brand in car care industry.
Sir, I want to learn this course please tell me how can I join it
Hello, you can enroll here - www.autofresh.in/contact-us
Once you fill the form, we will contact you.
Thank you sir for sharing informative steps👍🏼👍🏼
Glad you like it. Please share with your friends as well 😊
Sir what is done at the service of ceramic after a particular time period?
Yes, decon wash, if needed clay, if needed light polishing, then apply top coat, Happy Detailing.
Does ir lamp reduses curing time?
AS: Yes it can reduce curing time of base coat, its useful if your product is applied in layers and curing time is very high.
How many day we get the result
heating process is included in ceramic coating??
There are many ceramic coatings formulated for India like climates which just do not need any artificial heating to cure, natural curing works best in our environment.Happy Detailing.
Good job👌👌👌👌👌👌
Thank you!
ap course bhi karte he sir car detailing ka
Hello, Ashwani yes we do provide detailing training. For more detailing training information. Please talk to our expert on the given number +91 95862 99696 / +91 99240 04567
Thanks for technical informative knowledge 🙏 🙏🌹🌹
Thank you for your valuable feedback 😊
Sir what is the avg cost of ceramic coating?
You can visit our website. www.autofresh.in
Sir mai Saudi me abhi aya hu idhar start karaha detailing ka idhar 6 mahine full thandi hoti hai aur 6 mahine full garmi. Tu idhar mai kaunse product use karo . Reply me
Will ultramaxx ceramic coating give long term results?Do we need to re-apply after some period or it will last 5 years as mentioned?
Every ceramic coating needs Maintenance, top coat needs to applied every year after decon wash or light polishing as what is needed on car as per its condition. Happy Detailing !
@@AutoFreshIndiaOfficial Thanks, wat about swirl marks we get after washing & cleaning, till what extent it will prevent swirl marks?
I want to get my vento car to be ceramic coated will you please suggest me any best service centre from whom I canget it coated
Thanks for your interest in our products and services, Kindly share your location, will suggest you the nearest one, regards.
After how many days of ceramic coating we can get the car for outing in rain
As such it may vary from coating to coating, generally for any good company coating, one car take out the car in rains after 2 to 3 days, in some brands of coatings it may be 5-7 days also.
@@AutoFreshIndiaOfficial it is same also graphine coatings also?
@@rudrapratapmohanty6946 Yes same
Thank you for your valuable response & suggestion 🙏🙏🙏
@@rudrapratapmohanty6946 Happy Detailing.
Nice information.👌👌👌👌Thank u..
Welcome 😊Keep Watching
Also how does ceramic coating reaponds to daily dry wash instead of water wash..
Ceramic coatings are good with daily dry wash, no problem, you can use any good dry wash on daily basis on ceramic coated vehicles.
Thank you 🙏
Hello sir mai car polishing business karta hun thank you for information 😊
Happy Detailing.
Sure, I have 2 questions:
1) Is 3 layer coating required
2) How can one identify or test whether the ceramic coating is applied or is it only a polishing done by service centre
Thankyou in advance
Generally Third layer is like top coat which gives extra smoothness, gloss and hydrophobic, but last around 6-9 months in Indian conditions, the real protection comes from the hard base layer, so it depends on your need whether you need the third top layer or not ! Generally it is included in price of coating services so no harm having extra third layer / Top coat.
For consumer It is tough to identify on first day whether ceramic coating has been applied or not but after few days one can test its performance by doing tiny sanding/compounding on test spot at non dominant part of car, the hardness of coating will resist the cut, again this is tough for consumer, only a professional technician can identify.
If someone has such trust issue on service provider, it is highly recommended to get ceramic coating from trusted and branded store who use reputed brand of coatings, ask them to apply in your presence, collect the empty bottle and box with proper invoice and warranty card with all the details mentioned.
Happy Detailing
Q
Hoof..? Operation theatre use karna padega
Nice sir 👍👍👍
Happy Detailing.
Tq sir
For my work information
And many more tq sir
Very insightful
Ciramic Coating how many time apply.
Sir, there are two ways to apply Ceramic Coating:-
Option 1 - If you want to apply base coat once, you apply the base coat and then after 10-12 hours you will have to apply a top coat.
Option 2 - If you want to apply base coat twice (2 times) you will have to apply base coat once and then after 3 approximate hours you will have to apply another base coat and then top coat after 10-12 hours.
Very good. Keep it up
I have a question
Sure, please ask?
@@AutoFreshIndiaOfficial Thank u for the reply. I wanted to ask that there are ceramic coatings of 30 ml that can do couple of coats on 1 car that cost you 3-5 k but there are other coatings that cost like 10k . which one should we choose and is one better that the other or its just the branding
@@aamir4u100 Brand to brand and quality to quality the product differs, In ceramic coatings though product quality is extremely important but application is equally important. If one errors in application even better quality product/brand will not last. I suggest to choose a good reliable trusted brand of coating and equally important the studio which will apply it for you. Application is the KEY, don't underestimate it. Happy Detailing.
@@AutoFreshIndiaOfficial can u please recommend some coatings
@@aamir4u100 www.autofresh.in/ceramic-coatings/detailmax-ceramic-coating
Make a video on sanding? How to use etc...
Noted, thanks for the feedback.
Ceramic coating hone ke baad...delivery dene se pahle last may us par waxing krana chahiye ya fir nahi...
NO
Best hai aap
Very knowledgeable sir.
Just a little doubt , What's the point of applying polishing oils ,if we are going to remove it before ceramic coating ?
We compound/polish to remove defects, in this process some polishing oil is left over the surface, to ensure nano coating is properly applied we need to pre wipe and remove them, rgds
@@AutoFreshIndiaOfficial thanks appreciate the prompt response.
👏👏👏👏✌✌✌✌✌perfect job
Thank you so much sirr
All the best
Ek hi 30ml ki bottle me 2 coat ho sakte hain??
Yes possible !
Excellent sir
How to use pe videos series banaye
Thank you sir for responding.
Yeh video mein how to use hai. Aap ko koi aur product ke upar chahiye?
#Autofreshindia #Ankur sir, Full video on Paint correction..
But sir agr ceramic lagane ke baad ager 50 to 60 sec wait krenge tk coat hard ho jaega or niklega hi n hi i
Good sir 👏
Thanks and welcome😊
Pehli baar ciramic coating karane ke baad dusribaar kitne time baad karana chahiye
After you loose the first time one, poorly applied or inferior products may just last few days, pro applied high quality product may last few years, that is why its highly recommended to get your ceramic coating always done by good professional detailer who uses product of high reputed brand, Happy Detailing.
Plz tell me..How much cost of Ceramic coating for KIA Seltos?? And which place??
Hello Sachinji, can you please tell us your resident city so we can suggest you the perfect place?
@@AutoFreshIndiaOfficial At Anand, Gujarat... And Vadodara (40 KM) Ahmadabad (100 Km)
But after sanding the clear coat gets removed I’m afraid
With sanding or even compounding some microns of clear coat shall be leveled out, there is always fear of removing the clear coat while sanding, one has to be careful and use right equipment with right product with right technique and skill. A Pro detailer shall be always precise in his skills and will not remove the full clear coat. Happy Detailing.
Thank you sir
Welcome😊
How much water should be added in 99% pure IPA to make a IPA solution for wipedown?
Detailmax Pre-Wipe cleaner is suggested, IPA solution for wipedown needs to be powerful enough to clean all the polishing oils, it depends a lot on what company compound and polishes you have used, how much qty of compound you have applied, how much heat you had generated with polisher (by excessive heat you can drag the polishing oils deep inside the pores of clear coat) So you need to do the test panel with zero dilution and 50:50 to check what is working, its very difficult to give generic answers how much dilution to IPA or in many cases even pure IPA does not works. So for best results just follow the system, use Pre-Wipe cleaner from good company who makes it for the exact purpose.
thanks alot sir
Hello Harsh, Thank you for your valuable feedback.
Super Knowledge
Happy Detailing.
sir what is the average cost of ceramic coating
Kindly visit www.autofresh.in for more details or contact the sales team, Happy Detailing.
Whats about fees?
Share your contact details, sales team shall get in touch with you, regards
सर में first time Ceramic Coating कर राहा हूं.... Cretta suv car..... तो costumer ke ghar par parking me kar sakte hai kya....?? Plzz reply
Shall be difficult with good quality genuine coatings, but you can apply the hybrid's one or just a top coat variant. Happy Detailing.