Spraying Upol Raptor bedliner on the floor of a 2012 Jeep Rubicon
Вставка
- Опубліковано 5 вер 2024
- This video is for my Jeep people. Im finally getting around and helping my friend Scooby out. Hes been waiting to put this bed liner on the floors of his Jeep for a while now. Trail season is coming up we need to get some protection down on his floors before we tear them up this year with our muddy shoes. If you have noticed you havent seen my Jeep in a while i explain all that too. Dont worry its not sold. I still have it.. enjoy the video!
Dont forget to help support by SUBSCRIBING!! @Matt Pratt
also pick up some merch, represent the HUSTLE cause it WORX!
shop.spreadshi...
#jeep #rubicon #raptorliner
I Line-Xed my entire body of my Jeep. I need to put it on my channel I think. I SUBSCRIBED too.
That's awesome. I have a samurai project sitting around here that I am close to doing the same. My friend wasn't ready for that yet haha.
That paint scraper on the sawzall is a great idea! I'm getting ready to paint Raptor bed liner in my Jeep. I tried just a scraper but most of that sound deadener won't come up.
Then I remembered your video, so I bought a cheap sawzall and paint scraper to get that stuff off. Thanks for the idea! I'll let you know how it went for me.
That's awesome dude! Keep me posted
I tried the sawzall, and the paint scraper kept popping out. I ended up using a wire wheel to get the sound deadening off below the back seat. It was such a pain that I didn't bother doing it in the front. I'll just sand it flat.
@@WilsonZoneOK That is a bummer. Depending on the temperature outside depends on how easy it comes up.... Now some people go to the grocery store and grab a bag of dry ice and harden that stuff up using the dry ice and then it chips away pretty easy. But it's just bed liner just hammer on a heavy coat over top of it and you won't even notice it
Hi Matt! Sending my husband over to your channel as well, he loves this stuff! ❤️
Thanks you!
Awesome idea using the paint scraper.
Have to thank my buddy for that idea....and in the hot summer it doesnt work to well lol
Turned out awesome! Love his corners and tail lights
Thanks! Those corner lights you have to butcher the Jeep...I won't forget that day. Scoob was scared as hell lol
That saws all hack is an awesome idea!!!
Right?! Cheap attachment from homedepo and your good to go lol. Works great for other things too...around the house lol
@@mattFNpratt Love how Something Simple saves time and money. Keep up the cool video’s bro! Hate to see what my 08 looks like under the carpet lol
@@Rockyjeeper haha same! Well tear it out, scuff it up and bed line it! Any questions just hit me up.
After all that stuff comes up there is like a layer of just residue that it leaves behind. A wire wheel wouldn't take it off on mine so I took a spray bottle and just hit it with a little water and the wire wheel rips right thru it once its wet.
Great video. Doing research to line my JK tub. Garcias.
Thanks!
Came out nice been man I been wanting to do the same to mine for a while now. Make sure you do a rush creek video if you head out there.
Spraying was easy you should do it for sure. And yes, I'm definitely hoping to have a few rousch Creek videos this year. You can bet on that.
Looks great, my question is does anyone ever to tis to the back of the carpeted area on the back seats? I have a JEEP dog and 2019 sahara, dog hair everywere!
Yeah we did the back seat area in this one... Of course we don't have any carpet down at all but instead of having shiny paint that your jeep dog would scratch up we have the bed liner down which doesn't show scratches as much and probably easier to vacuum hair up. So probably a good idea for your dog!
@@mattFNpratt Thanks Matt, I have a liner on the rest of the jeep "areas" just not on the back of the back seats, which are carpeted. PITA for dog hair
Does it work for temperature control inside the cabin?
I'm sure any extra layers or coatings can help a bit. But they do have better options for temperature control if that's what your aiming at.
Awesome content man. Have you considered doing the whole Jeep? I’m pretty sure it would look great! I have a JL that most likely get lined down the road. Keep up the good work. BTW, where are you guys located?
Thanks you! And yea I definitely have considered it. I have a samurai waiting in the wings to be worked on and I think we might spray that a colored bed liner. This samurai is going to be a trail only rig so it's going to need it. UA-cam is tough I'm hanging in there lol. And we are located right outside Baltimore MD. How about you?
Matt Pratt That would be quite the project. If it happens, I’m looking forward to it! I had one of those Suzukis when I was a teenager...I really loved that little car... I figured you were in the east coast, the shots outside the shop give you away. I’m in MD as well, near Gaithersburg. Stay safe and healthy bro, maybe I will pull the trigger on that raptor liner once this craziness is over.
What did you put on your fenders for that edge??? that looks great. I have used door trim, but this looks AMAZING! the bedliner looks great too! want to do this badly... :) someday.
Thanks!!! And if your talking about the metal fenders and the black edge.....it's actually Bedliner also. We put that stuff on everything that takes a beating.
@@mattFNpratt ohhhhh. I thought they were cut plastic fenders with an edging put on...
@@jasonallen6836 that's not a bad idea, and just replace them as you hit stuff with them
Any comments on how it deadens sound and/or how does it clean up? AND you mentioned Rausch Creek, are you nearby? I'm in DE and love Rausch and AAOA!
It's a little more quiet...but still has a hallow sound? But not a tin can sound.... If that makes sense lol...
And dude I'm in MD! Soon I have a little off road project I'm going to start. And rausch is where I'm going to test it out.
That sounds awesome! Maybe shoot me an email and I'll swing up that way when you do. hustleworxmd@gmail.com
@@mattFNpratt Will do! This video has got me planning to try this. I reached out to local Rhino/Line-X shops for quotes and passed out. I'll hit you up for tips and tricks for sure!
Did you use any raptor primers like the Epoxy one or the acid etch?
I didnt use that brand specifically...but its always best to use an epoxy primer or acid etch over your bare metal. If I did I probably used a spray can version of acid etch from the company Kent. Thays usually what i have around my shop.
I have a 2009 and plan on doing this but how do you hide the wires in the front once the carpet is gone?
We just ran them under and around the trim down the side, also cleaned them up a bit wrapping them in fresh wire loom. Try it and let me know how it works out.
@@mattFNpratt what were the loom sizes you used through the vehicle?
Why do u wanna get an older trans vs re-build the one u have
The older ax15 trans don't have a synro issue as bad as the newer nv3550. The ax15 does have other issues but I can deal with. The nv3550 trans can be rebuild but they say you can rebuild them and they still end up grinding later down the road. But I'm having issues finding an older trans so rebuilding might be my only route and just see how many miles I can get out of it....
Grinding Trans? bet its a NSG370. Mine in my 05 is a little... sloppy.
I have an 03 Wrangler...it's in my earlier videos...and it has the nv3550...grinds all the time. I just put an ax15 in it(vid will be out soon) for temporary untill I get the other trans rebuilt. But yea most jeep trans just plain suck lol
@@mattFNpratt yeah, I saw that after I posted. Mine grinds a little, but it is not bad. Hope I dont ever need to rebuild it.
Lol ax15 trans get stuck in gear, nv3550 synchros are made of playdoh and sounds like your trans was built in a sand storm....why jeep? Lol
So only 4 liter to do inside of the jeep
Yea we had full coverage at 2 we were just building it up in heavy traffic areas after that
Hey man I’m in Anne Arundel County and looking to raptor line the inside of my Jku. Any chance you could help out with the job? I could pay you to help out. Just don’t have the space or tools to do it myself. Let me know brotha! Stay safe.
For sure. Dm me on my ig @hustleworx and we can go from there.
Poison off gassing
Lol
Seriously bro I think raptor off gasses poison if used in enclosed interior spaces
@@jackstrawfromwichita5016 that definitely makes sense! Im sure it does that stuff is thick