COMMON ISSUE - Brake caliper seized on the Peugeot 807

Поділитися
Вставка
  • Опубліковано 1 жов 2024
  • It started off a pretty standard disc and pads change but turned into a 3 day journey :)
    Please hit the subscribe button and enjoy the video :)
    #807 #peugeot807 #2.2HDi #807norwest
    Peugeot 807 2.2 HDi 2.2 6 Speed Automoatic Norwest
    Peugeot 807
    807 Diesel
    807 7 Seater
  • Авто та транспорт

КОМЕНТАРІ • 42

  • @ev-olution8597
    @ev-olution8597 Рік тому

    It looks exactly same as the one used on early VW Sharan and Seat Alhambra vehicles. Another common issue with them is hand brake shaft gets corroded inside and seizes. Unfortunately proper way to repair it involves taking all caliper apart, cleaning all the rust out and filling with some thick lubricant (for future rust prevention) to cavity where the shaft sits before inserting shaft back to it's place. Or just replace the caliper completely as new is cheap enough and not worth time wasting on fixing it.

  • @zulfqarali905
    @zulfqarali905 Рік тому

    Hi keep it up you are doing a great job Ali Walsall west midlands england junction 10 m6 Walsall churckery

  • @frodefjeld3448
    @frodefjeld3448 3 роки тому +1

    For better access to the brake fluid reservoir, just take out the pollen filter cassette.

  • @stevebarkman2681
    @stevebarkman2681 3 роки тому +1

    I have one too, same colour even, a Norwest 6 speed manual 100Kw HDi, had the same issue with rear caliper when I bought it 2 years ago.
    I carry many different loads, seats in, or seats out. A fantastic vehicle. Odd.....a bit!

    • @projectfearn
      @projectfearn  3 роки тому +1

      Yeah calipers are deffo a pain in the rear on this car 🚗

  • @julianleyton8668
    @julianleyton8668 3 роки тому +1

    One of the few problems on my C8 2.2 HDi 173 hp (just like yours) was a seized calliper at about 40,000 miles. I got a second hand one for about £25 on EBay, fitted it in about an hour, and it has now done 165,000 without any further problems.

  • @Tizzypj
    @Tizzypj 2 роки тому +1

    Happy days I’ve gotta do a handbrake issue one side and a whole caliper job the near side on a 07 expert van 🤦🏼🤷‍♂️2track rods 2 wishbones 4 cv boots frigging shit job but I’m skint and need to get back to work so needs must lol

    • @projectfearn
      @projectfearn  2 роки тому +2

      Yeah not the best jobs. You doing it on the drive too? 🚗

    • @Tizzypj
      @Tizzypj 2 роки тому +1

      @@projectfearn on a gravel private yard mate I’ll get a few pics and upload them buddy it’s a little shit and it’s wet but I’ll make do lol used to side of road shit I’ve got a long life story but welcome to check my Chanel I’ve dropped a few vids and few comments explain how things are but I’ll get a good vid today mate

    • @projectfearn
      @projectfearn  2 роки тому +2

      Nice. Will have a look pal 👍 good luck with it :)

    • @Tizzypj
      @Tizzypj 2 роки тому +1

      @@projectfearn just put a something quick together for you mate it’s just uploading but yea will get a rough gist of what’s happening lol

    • @Tizzypj
      @Tizzypj 2 роки тому +1

      @@projectfearn I appreciate your time as luck lol Thankyou bro

  • @gordonscott4378
    @gordonscott4378 3 роки тому

    What’s happening with berlingo buddy

    • @projectfearn
      @projectfearn  3 роки тому

      I've got a new rear axle to put on it pal which should be next week 🤞

  • @phil_law
    @phil_law 3 роки тому +1

    What a pain mate but glad you got it sorted. Cheers again for the content fella!

  • @neilobusk
    @neilobusk 3 роки тому +1

    Its a mum bus.... but enjoying the content... :)
    what these like for rust underneath Danny ? or no worse than the usual..?
    N x

    • @projectfearn
      @projectfearn  3 роки тому +2

      This one is very clean underneath and has been undersealed. 😎

    • @julianleyton8668
      @julianleyton8668 3 роки тому +1

      Most of it is either galvanised or plastic. Mine, at 12 years and about 150,000 miles had virtually no rust. Only little brackets and exhaust fitting showed any rust at all.
      One year later there is a bit of surface rust in the rear suspension area but for 13 years old I reckon it’s excellent.

    • @neilobusk
      @neilobusk 3 роки тому

      @@julianleyton8668 Ta for the info... :)

  • @pkautorepairs2826
    @pkautorepairs2826 3 роки тому +1

    Another great video, enjoyed that mate thanks 👍

  • @fatman2570
    @fatman2570 3 роки тому +1

    I had exact same problem and affects hand brake also. Bought my 08 model really cheap cos needed work spent about 1k but well worth it, brilliant to drive and loads of room.

    • @projectfearn
      @projectfearn  3 роки тому +2

      Yeah with there being no rear brake shoes the handbrake is attached to a lever and spring which presume adds pressure to the fluid and makes the piston clamp slightly. But if the piston is seized it won't do nothing 🤣

    • @fatman2570
      @fatman2570 3 роки тому +1

      @@projectfearn check rear shocks I had to renew mine, once it's all done you'll love it. Just put wind reflectors on mine and ordered bonnet stone chip deflector.

    • @julianleyton8668
      @julianleyton8668 3 роки тому +1

      @@fatman2570 where did you find bonnet chip protector ?

    • @fatman2570
      @fatman2570 3 роки тому +1

      @@julianleyton8668 Deflectors. eu. Sofia Bulgaria just Google easy to order arrived in 10 days £61 including postage. Got mine but not fitted yet.

    • @julianleyton8668
      @julianleyton8668 3 роки тому +2

      @@fatman2570 Thanks for that, although they don’t seem to be offering them for the C8 now ?

  • @scoyle1750
    @scoyle1750 3 роки тому +1

    Good job 👍

  • @shaydevlin5557
    @shaydevlin5557 3 роки тому +2

    Are those velour seats comfy I always see them and they look soft and comfy