HOW TO MAKE WATER DISPENSER USING ARDUINO
Вставка
- Опубліковано 2 чер 2019
- In this video, you will learn how to make water dispenser using arduino
Components required to make this project are :
1) Arduino UNO
2) Arduino UNO Cable
3) Ultrasonic Sensor
4) Buzzer
5) Jumper Wires ( M To F )
6) cardboard box
7) plastic pipe
8) water pump
To buy any of these components :
Ultrasonic Sensor : robokart.com/product/detail?i...
Arduino UNO : robokart.com/product/detail?i...
Arduino Code :drive.google.com/open?id=1Wtg...
For Participating in the Contest you have to send us the video on
care@robokart.com
For Any inquiries you can call us on +91 9136333101
About Robokart :
Robokart started in November 2014 with very small team and product range which can help learners to design and develop refine products. Later, we started to take supplementary training in various schools & colleges to teach robotics, augmented reality, 3D Printers, Android app design etc. which helped students to learn by practicing the subject.
Robokart is serving 150+ labs pan India and growing.
To know more things visit us
robokart.com
Our facebook page
robokartindia
#everydayrobokart #dailyrobokart #robokart #dailydoseofstemeducation #stemlearning #atllab #ataltinkeringlabs #ultrasonic#Arduino#ArduinoUNO#jumperwires#electronics#stem#technology#science#innovation#arduinonano#arduinomega#DIY#ATALFEST - Наука та технологія
Can you explain me where did you connect the ultrasonic ??? What it means D5 pin 6 or D6 pin 3 ?????
asking for complete code as a soft copy to my project thank you so much ❤️❤️❤️
Did he connect the water pump to the breadboard? Where did the extra set of jumper wire came from?
Thankyou so much it worked!!!
Hello bhai nahi work kiya please help
@Robotkart the right description of this project plz
Thankyou so much it worked..
Hello bhai nahi work kiya please help
Hello, were did you use the battery and conector ?? please answer fast its for my exam
Do u know any possiblity why the pump not working, i Mix the coding of arduino water level and water dispenser but the pump not working, but the arduino water level is ok. Is it because i mix the 2 different function of coding in one sketch?the pump working in single coding.
Where to connect battery when the 5v and Gnd pins of arduino are already connected to breadboard
amazing work!! is it possible for you to give me the code for this? it will be very helpful
Do you have a link to the pump used?
can anyone link where to buy the water pump he used
what is the code for this? bcuz the code in the description it can't really work. could u help me please
Even though we have connected the sensor, without the help of the sensor, water starts to flow immediately we connect to the battery.
I have as you shown but its not working. Can you please help to work this
can you please let me know the pin configuration and the connections If I am using a arduino nano instead of uno..?
What is the size of the tube
How to connect multiple ultrasonic sensor
WOW THIS IS COOL THE CODE IS WORKING 100000000% GOODLUCK GOD BLESSS UUU !!!
thanks 😊
Hello..can you send me the right coding..i'm using arduino uno
Hi! Can you please send the code in my mail, I need it for project purposes. Thank You.
Hello ,Can you please send the code in my mail oumama.elhaous@gmail.com
Hey how its working mine is not working
Works for my project,.. Thanks man.
Can I contact you in Facebook??
yeah sure
What is the Name of your Facebook?
Carmelo Fuentes
is there any library needed? I think there must be
Bro how we we'll get the power
Good video bro, can you give me the full prototype,please?
I want to use for my study
is the procedures possible for making automatic soap dispenser?
same thing, replace water with soap
Can u give the code plz
Link not working
can I replace Arduino nano in the place of Arduino UNO ?
Yes you can, it works the same.
the code is not written correctly
How about with time
Bro pls answer fast fast
Can I use nano instead of uno
yes
Hi do you have the part number for the water pump and the pipe ?
There is no specific part number for this pump. It is simply called 3-6 volt mini submersible pump. Details of pump given over here: www.dnatechindia.com/3-6-volts-mini-dc-submersible-water-pump.html
Can you please help me my arduino uno board burned what happen to my board i just follow to wiring diagram and use 12v power supply??
you used 12v u have to use 9v
You haven't mentioned relay module user
Bro please send proper circuit diagram
Can anyone please send me Arduino code for dispensing a given quantity of water for e.g 50ml,100ml
@robokart where do you connected the battery ? And the water pump ????
negative terminal to gnd pin of arduino and positive terminal to 5v of arduino
@@Robokart but you connect the battery with arduino uno using battery connector?
@@Robokart Please give connection of pump. It is not clear in video please.
Sir where did battery gone
Why my relay 5v yellow led blink
Works for me thanks bro
Hello ,Can you please send the code in my mail oumama.elhaous@gmail.c
Hello ,Can you please send the code in my mail oumama.elhaous@gmail.com
the right description of this project
@@elhaousoumayma8689 hey could you please send me the code its really urgent, omaarroshdy1213@gmail.com
Hi the link for the code is not working can you send me the code or something so I can programme it as well
hey could you please send me the code its really urgent, omaarroshdy1213@gmail.com
Please give me link
Hi you have diagram? pls.
Can you send the pump wiring send fast
can you give me coding
where is the circuit diagram
Can u give me the code....please....
Code in the description
But it is showing error 😔
where's the flowchart?
Can you tell in which language you have write the code? Plzplz
python
Can you pleaseeee give me the code....the link you provided i cannot go inside😫i have to do this project for my exam
Code
where you connected battery
negative terminal to gnd pin of arduino and positive terminal to 5v of arduino
@@Robokart but you connect the battery with arduino uno using battery connector?
BRO JUST YEETED THE BATTERY OUT ITS ROLE💀💀
Where's the battery?
Will it work for a gallon of water ?
Work
FOR EVERY 1 OUT THERE HE CONNECTED THE NEGATIVE OF THE PUMP WITH THE NEGATIVE OF THE STRIP
Audino code unsupported why?
Same with me
/WATER DISPENSER
#define trigger 5
#define echo 4
#define Relay 6
int long time;
int distance;
//float time=0,distance=0;
void setup()
{
Serial.begin(9600);
pinMode(trigger,OUTPUT);
pinMode(echo,INPUT);
pinMode(Relay,OUTPUT);
delay(2000);
}
void loop()
{
measure_distance();
if(distance
U show the circuit in Nano Board
But u will make the project using arduino uno
yes
Does it automatically stop?
Even if the cup is still being sensesord by the ultrasonic?
yes
Robokart thankyou
@@gabrielopena6580 NO
and some description not right
plz the right description of this project
wait wait, where's the battery
Yes bro
The voltage supply already being replaced with the laptop since it laptop is AC voltage
Can we do this without Breadboard
Yeah Can we do this Project without Breadboard?
ya can we do that?
Battery kaha connect hai yrr
negative terminal to gnd pin of arduino and positive terminal to 5v of arduino
@@Robokart but you connect the battery with arduino uno using battery connector?
4:12
Not understand wiring
If anyone has completed the project please contact me! I need help!
mail your query to us at support@robokart.com
hey could you please send me the code its really urgent, omaarroshdy1213@gmail.com
Don't know what the problem is....
Bhai ye video dekh kar kiska water dispenser ban gaya
The word need to bee black🤦♂️.
#define trigger 5;
#define echo 4;
#define relayPin 6;
float time=0,distance=0;
void setup()
{
Serial.begin(9600);
pinMode(trigger,OUTPUT);
pinMode(echo,INPUT);
pinMode(relayPin,OUTPUT);
delay(2000);
}
void loop()
{
measure_distance();
if(distance
Can you explain me where did you connect the ultrasonic ??? What it means D5 pin 6 or D6 pin 3 ?????