How do I set the RET2001 so that I turn it on and off to suit myself so that it comes on at 20 degrees and to turn it off when I want to. The leaflet does not explain this. My previous thermostat was numbered 1-5. 1 was off and 4-5 was on. Easy
@@DanfossClimate I think it would be easier if you said in the UA-cam comments here as I am wondering the same thing and I can't be the only one. You will just inundate your support with the same question.
I have the TP5001M V2, how do i get it to stay on all day if it drops below a certain temperature? It seems like there's no option to switch it off 'timed'.
Hello. I have a tp5001. You said i need set a time to turn off the heating. I want it to come on 4 times a day, but by ypur instructions i can only set two times for heating to come on, however the manual says i can set 4 times. I have checked and it is on the 5/2 programme. Do the small numbers (1,2,3,4) indicate tines for the heating to come on (and when the ambient temperature reaches the set temperature it automatically turns off) OR does 1&3 indicate turning on time, and 2&4 indicate turning off times?
Hello Danfoss . My TP 5000 thermostat screen blank after changing batteries multiple times and all batteries are AA high alkaline. Screen still blank. What should I do please
Since a week my RET2001b gives me an error message, saying 'retb u1.3'. The manual doesn't mention anything about this error message. What should I do?
Hello Danfoss, My TP5001 is showing an error message E6 - Real Time Clock failure. I have set the clock to the correct time but it is still flashing. The heating is still working thank goodness. How do i resolve this? The user guide tells you what the error code means but mentions nothing about how to fix it. Thanks.
Hey Mitch. Kindly refer to our FAQ page to find an answer - www.danfoss.com/en/products/dhs/smart-heating/smart-heating/danfoss-tpone-s/#tab-faqs. Hope this helps!
Hi. Please refer to our FAQ page to find an answer to your question - www.danfoss.com/en/products/dhs/smart-heating/smart-heating/danfoss-tpone-s/#tab-faqs. Thank you.
I have this thermostat installed and frankly its just so confusing.Even after watching your demonstrations of how to use. I must say i am still non the wiser. Your kit is not easy or straightforward.
THANK YOU! This is exactly what I needed to know for my RET2001. Explained it much better than the guy who installed it!
How do you just turn the heating on and off ???..
How do I set the RET2001 so that I turn it on and off to suit myself so that it comes on at 20 degrees and to turn it off when I want to. The leaflet does not explain this. My previous thermostat was numbered 1-5. 1 was off and 4-5 was on. Easy
To assist with troubleshooting this issue, please reach out to your nearest Danfoss sales and service office: www.danfoss.com/en/contact-us/.
@@DanfossClimate I think it would be easier if you said in the UA-cam comments here as I am wondering the same thing and I can't be the only one. You will just inundate your support with the same question.
I have the TP5001M V2, how do i get it to stay on all day if it drops below a certain temperature? It seems like there's no option to switch it off 'timed'.
Hello. I have a tp5001. You said i need set a time to turn off the heating. I want it to come on 4 times a day, but by ypur instructions i can only set two times for heating to come on, however the manual says i can set 4 times. I have checked and it is on the 5/2 programme. Do the small numbers (1,2,3,4) indicate tines for the heating to come on (and when the ambient temperature reaches the set temperature it automatically turns off) OR does 1&3 indicate turning on time, and 2&4 indicate turning off times?
Hello Danfoss . My TP 5000 thermostat screen blank after changing batteries multiple times and all batteries are AA high alkaline. Screen still blank. What should I do please
Please reach out to your nearest Danfoss office or service partner for assistance: bit.ly/3aQedtE.
Since a week my RET2001b gives me an error message, saying 'retb u1.3'. The manual doesn't mention anything about this error message. What should I do?
To assist with troubleshooting this issue, please reach out to your nearest Danfoss sales and service office: www.danfoss.com/en/contact-us/.
Hello Danfoss,
My TP5001 is showing an error message E6 - Real Time Clock failure. I have set the clock to the correct time but it is still flashing. The heating is still working thank goodness. How do i resolve this? The user guide tells you what the error code means but mentions nothing about how to fix it.
Thanks.
Hey Mitch. Kindly refer to our FAQ page to find an answer - www.danfoss.com/en/products/dhs/smart-heating/smart-heating/danfoss-tpone-s/#tab-faqs. Hope this helps!
Are they all compatible? I have a electric boiler and I really don’t like the 5001, i would prefer the 1001 if that will work? Please
Hi, thanks for your question. We will check with our experts and get back to you.
how do you set the date and time?
Hi, you can find that here: ua-cam.com/video/ltYQpeA0Xk0/v-deo.html.
I have the tp5001.... When I try to set on and off times I hold for 3 to five seconds nothing happens help longer nothing happens????
Hi. Please refer to our FAQ page to find an answer to your question - www.danfoss.com/en/products/dhs/smart-heating/smart-heating/danfoss-tpone-s/#tab-faqs. Thank you.
My Danfoss thermostat is stuck on?
Hi Dawn, we will check with our experts and get back to you.
I have this thermostat installed and frankly its just so confusing.Even after watching your demonstrations of how to use. I must say i am still non the wiser. Your kit is not easy or straightforward.
Agree, i have the tp5001m, it's a terrible product