Don’t miss out on all the action this week at DraftKings! Download the DraftKings app today! Sign-up using dkng.co/jaysway or through my promo code JAYSWAY
Hey Jay, I would get a few pool noodles and cut them to fit the opening and glue them in place so the dogs wont step on the Edge or bump into the side openings.
Now there's a man who loves his dogs, an awesome Honey-Do project, and a sweet build Jay. Those doggy shakes after their baths were "pant pant pant roooorra luv my new warm bath Boss". Thanks for the reel J.
Consider putting pool noodles, cut to length and sliced open on one side end to end, on the cut edges to help prevent injury to man or beast. They have a multirude of uses around the house. On outdoor metal chair arms when its hot outside to stuffing tall boots to help prevent folding. Think outside the box. An alternative could be pipe insulation or the edgeing made to protect car doors, depending on cost comparison. I buy 4-5 noodles every year when they go on clearance at the end of summer. Love the heater!! Could be useful at the barn too if you dont have access to hot water.
I have gotten more grief about giving my dogs warm water baths…I am glad to know I am not alone. I think this may be your most ingenious build yet. as far as that sheet metal edge, if it is still sharp there is sort of a “U” shaped self adhering neoprene strip that might work well. 👍🏻👍🏻
Where you cut the metal tub entrance, you should put some rubber foam to cover the sharp edges from the cut. Otherwise, that is just an accident waiting to happen.
Awesome video man, next time you do a dog bath can you do a full bath dog video of them being all lather up and dripping with soap lol while the soap suds are running down your forearms while the dogs are dripping with soap lol
What works great on the sharp edges is to use a small diameter hose (1/4" or smaller). Using a razor blade knife, slice length wise and use your Excell to glue it on the sides and bottom edge.
It's really great that you care for your dogs proper. Love watching animals play! I think you did a great job. Wish you lived closer to Selma! My sisters dogs need lots of help!!! Be kind to each other. Stay safe. Love to all
@@stephanieellis1811 and she's back on her feet, thats amizing! big hugs to nana, she is lovely. it was just a comment for fun, like when you hear someone breathing in the video. didnt meant anything bad with my comment just to all know.. love you guys, you a beautiful family!
Best setup yet sut I would add trim to the metal edges and from the auto parts store you can get door edge guards and cover the sharp edges. Rubber Edge Trim U Channel Edge Trim Sheet Metal Edge Guard Protector, Self-Adhesive EPDM Seal Strip for Panels, Car Doors, Steel Plates, Hatches, Table Corners, Fit 1/16"(1.6mm), 10Ft Length from amazon is another way for around $10.00
And here I am, just throw mine in the bath then have to clean up the mess of the bathroom 🤦. Great job. I didn't see, but is the water draining somewhere other than onto the deck?
That is a great idea! Can I suggest adding split hoses or something to cover the sharp edges top to bottom on both sides...that appears to be waiting to catch a dog or someone in between toes as they walk into the tub...ouch...
Anything to truly avoid injuries to others, and of all due to all sharp edges...been there, done that...won't go into the gruesome details of a foot injury...was injured due to no protection provided from something of a similar design...added protection applied to all sharp edges is all that is suggested.@@davis51369
Great idea, the height of it seems just for Nana to use and for the dogs to be comfortable. Of our 8 dogs 5 will fit in the bath and the other three will easily fit in the walk in shower. Our biggest is my baby at 165 lbs of Pyrenean mountain dog, she's white as are 4 of the smallest. Then we've got 2 black and brown and 1 brown. We have a huge forest as our back garden so they tend to get dirty pretty quick. Your dogs look great and very adventurous and nosy. Great post, regards to the family. 🔨🔨🔨🔨🔨✔️
Car door edge protectors would do great to keep them from getting cut at the entrance. The pool noodles would be great to go around the top. Sure it's already blunt but, you could always use a little bit more padding as you are still leaning over😄...Also, I think that a flat shower drain would have been better suited than a sink drain. Thanks, this was entertaining to watch. Also, when I was growing up, I never ever, ever come across ice cold water from the water hose. 😄
I’m with a lot of the comments regarding the cut edges. I think I’d sandwich the edges with pvc trim like Azek. Then I buy a small can of truck bed liner and apply it to the inside to seal the Azek and the metal. Not to mention it’ll give them a better grip. I think the pool noodles would get funky fast.
Hope you saved the piece of tub you cut off. Add a couple of hinges to one side and a latch on the other. Reattach to tub. That way dogs can’t try to run out
Enjoyed the video for the pup tub build. What a cool idea. You could even use it for yourself if you got extremely dirty at work. lol Y'all take care and God bless.
Now you just need to automate it. Hook up a 3D printer with some spray nozzles and you got yourself a “Laser Touchless Dog Wash”, charge neighbors $10 per dog, retire from Perkins. 😊
I meant to end with, when I moved into my parent’s house, temporarily, when I was away, the dog snuck into the house and jumped into the bathtub with my twelve year old niece! She was not amused.
Nice one Jason! those pups will be the cleanest pups on your street! Did you hook up the drain to something under your porch? Thought I saw some water leaking at 24:36 ?
Jerry not for nothing but I had a cousin on my wife had a cousin I should say used to take cold showers all the time and then one day they went to wake him up to go to work and he was dead because of the coldness in his body, your body supposed to be a certain temperature all the time if you’re cold you’re supposed to go inside and get warm. This is what happened to him I don’t hope it never happens to you but be very careful taking a cold, cold shower if you’re gonna do that you should have yourself a steam room first and then take a shower, cold shower and then go back in the steam room and then come out and take a regular shower and then get dressed. That’s how you actually do it, you don’t wanna hurt your heart you’re hot it will get a shock real quick when you jump into cold icy water. I’m just giving you a heads up. This is Alan from Massachusetts.
I have wanted to build one of these for a long time. Good job. Do you live with your in-laws? Those dogs are so lucky to have a creek to play in anytime they desire.
Wanted to compliment you on the video editing. I like that you are talking, but you are showing a different cut. Are you doing the video editing, or who might be? Keep Up The Good Work
Some friends of the family put a regular shower pan in the mudroom at a comfortable height and hooked it up to the water system in the house. The building inspector was totally confused...took him a while to grasp the concept of a dog shower....
Hey, I don't know if anyone has mentioned this yet. I noticed that the dog shampoo you're using looks like Hartz brand. I've heard a lot of stories about people's pets getting seizures and other severe health complications right after using that shampoo. If you're still using it, I would stop and change to a more natural one. Hope this helps 👍🐶
Hmmm, do you think perhaps you should just buy a paddling pool to wash the dogs…..and show it on your channel because your killing your dogs street cred….!😁🤪
Yes I know I share last names with you. I watch all the Perkins Builder Brothers videos. I enjoy every minute of the video. Every one on the posts make me laugh and we get to see you building something. Keep up the great work and content on your videos it’s just as great as the Perkins crews videos. Thanks
Don’t miss out on all the action this week at DraftKings! Download the DraftKings app today! Sign-up using dkng.co/jaysway or through my promo code JAYSWAY
Best thing I found for sharp metal edges is a garden hose with a slit cut into it and then slide it on the metal.
I miss my Nana. Give yours lots of love.
Sorry! Will do!!
Car door self adhesive edge gards would work perfectly.
Maybe extend the drain pipe through the deck so the water doesn’t come out on your feet? Great job!!
Ellis….paddling pool is the way to go….. although I do enjoy you working 🤣🤪
Hey Jay, I would get a few pool noodles and cut them to fit the opening and glue them in place so the dogs wont step on the Edge or bump into the side openings.
Came here to say the same thing. Or even split some PVC pipe and cement in place.
Was going to say the same thing. Perfect solution to avoid potential scratches to the dogs and anyone 's arms. Plus it'll avoid rust around the cut.
Agreed, or even some rubber garden hose around the metal edge would do the trick 👍
Mr Ellis, I take my hat to you….. I think the dogs loved it…. great idea….🍺🎉😁💥😁😎
I love this program I did alot of building with my dad before he passed away
I’m sorry to hear that! Thank you so much for watching.
Now there's a man who loves his dogs, an awesome Honey-Do project, and a sweet build Jay.
Those doggy shakes after their baths were "pant pant pant roooorra luv my new warm bath Boss".
Thanks for the reel J.
Thanks for watching!!!
Consider putting pool noodles, cut to length and sliced open on one side end to end, on the cut edges to help prevent injury to man or beast. They have a multirude of uses around the house. On outdoor metal chair arms when its hot outside to stuffing tall boots to help prevent folding. Think outside the box. An alternative could be pipe insulation or the edgeing made to protect car doors, depending on cost comparison. I buy 4-5 noodles every year when they go on clearance at the end of summer.
Love the heater!! Could be useful at the barn too if you dont have access to hot water.
I have gotten more grief about giving my dogs warm water baths…I am glad to know I am not alone. I think this may be your most ingenious build yet. as far as that sheet metal edge, if it is still sharp there is sort of a “U” shaped self adhering neoprene strip that might work well. 👍🏻👍🏻
Can't wait for the 20-part mega shop build series Jay!
Me neither!
Where you cut the metal tub entrance, you should put some rubber foam to cover the sharp edges from the cut. Otherwise, that is just an accident waiting to happen.
Awesome video man, next time you do a dog bath can you do a full bath dog video of them being all lather up and dripping with soap lol while the soap suds are running down your forearms while the dogs are dripping with soap lol
Next, the kids!
Great job. I would add an edge guard on where the metal was cut. Especially the bottom side that they could step on.
Consider something from Trimlok. Would not want to hurt a puppers paw pad on that metal edge!
What works great on the sharp edges is to use a small diameter hose (1/4" or smaller). Using a razor blade knife, slice length wise and use your Excell to glue it on the sides and bottom edge.
It's really great that you care for your dogs proper. Love watching animals play! I think you did a great job. Wish you lived closer to Selma! My sisters dogs need lots of help!!! Be kind to each other. Stay safe. Love to all
I just rewatch the 1st 20 seconds over and over ... HI !!!
Thanks Thor!! Tell the fam the Ellis’ say hi!
at 12:35 nana had a heavy breathing while holding the camera :3.. hugs to nana!
Thanks, she just had heart surgery. She's doing great but working to build her stamina back up.
@@stephanieellis1811 and she's back on her feet, thats amizing! big hugs to nana, she is lovely. it was just a comment for fun, like when you hear someone breathing in the video. didnt meant anything bad with my comment just to all know.. love you guys, you a beautiful family!
Best setup yet sut I would add trim to the metal edges and from the auto parts store you can get door edge guards and cover the sharp edges. Rubber Edge Trim U Channel Edge Trim Sheet Metal Edge Guard Protector, Self-Adhesive EPDM Seal Strip for Panels, Car Doors, Steel Plates, Hatches, Table Corners, Fit 1/16"(1.6mm), 10Ft Length from amazon is another way for around $10.00
Wao .
Great idea , specially that you have 4 of those love one pets !
Your next project should be, you building yourself a shop. Would be fun to see perkins crew doing that.
It’s in the works. Crack out the new vid!
Oh my gosh so awesome! Love this and loved seeing all the babies
Thanks for watching!
Pretty cool idea. You should get some cold galvanizing spray and spray those cut edges so they don't rust
And here I am, just throw mine in the bath then have to clean up the mess of the bathroom 🤦. Great job. I didn't see, but is the water draining somewhere other than onto the deck?
No. Just on the deck and then through the cracks.
That is a great idea! Can I suggest adding split hoses or something to cover the sharp edges top to bottom on both sides...that appears to be waiting to catch a dog or someone in between toes as they walk into the tub...ouch...
Pool noodles would work great
Anything to truly avoid injuries to others, and of all due to all sharp edges...been there, done that...won't go into the gruesome details of a foot injury...was injured due to no protection provided from something of a similar design...added protection applied to all sharp edges is all that is suggested.@@davis51369
Great Build Jay, I know my Dogs would love it! ❤
Put pipe insulation on the entry edge to illuminate any chance of cutting, scratching on the cut metal.
God bless you and your family.
Thanks brian!!
Love how creative Jay is 👍 gets an idea in his mind an runs with. Turned out great.
Awesome result Jay. More enjoyable to use for both the dogs and you guys.
Great idea, the height of it seems just for Nana to use and for the dogs to be comfortable. Of our 8 dogs 5 will fit in the bath and the other three will easily fit in the walk in shower. Our biggest is my baby at 165 lbs of Pyrenean mountain dog, she's white as are 4 of the smallest. Then we've got 2 black and brown and 1 brown. We have a huge forest as our back garden so they tend to get dirty pretty quick. Your dogs look great and very adventurous and nosy. Great post, regards to the family. 🔨🔨🔨🔨🔨✔️
I thought you would have made a ramp for the dogs to make it easier for them to walk into the tub. Either way, excellent work as usual.
That was a thought, but then it was just gonna take up too much space on the deck
great job jay
Great idea !! Love from México 🇲🇽🇲🇽🇲🇽
Car door edge protectors would do great to keep them from getting cut at the entrance. The pool noodles would be great to go around the top. Sure it's already blunt but, you could always use a little bit more padding as you are still leaning over😄...Also, I think that a flat shower drain would have been better suited than a sink drain.
Thanks, this was entertaining to watch.
Also, when I was growing up, I never ever, ever come across ice cold water from the water hose. 😄
The opening you can put rubber gasket or pool noodles
I’m with a lot of the comments regarding the cut edges. I think I’d sandwich the edges with pvc trim like Azek. Then I buy a small can of truck bed liner and apply it to the inside to seal the Azek and the metal. Not to mention it’ll give them a better grip. I think the pool noodles would get funky fast.
Hope you saved the piece of tub you cut off. Add a couple of hinges to one side and a latch on the other. Reattach to tub. That way dogs can’t try to run out
Genius!!
Oh man 9:42 I'm that subscriber! That was awesome thanks Jay 😊. Great work as always for your family 👏
You got it!! Thanks for watching!
💖
put pipe insulation on the cut out section tub looks good
I love the dog bath. Could you put something at the edges of the bathtub to protect yourselves and the dogs from accidental cuts.
Pool noodle or PVC pipe
when I give the dogs a bath my back feels about 100 years old by the end of it 🤣
aw this was really cute
Enjoyed the video for the pup tub build. What a cool idea. You could even use it for yourself if you got extremely dirty at work. lol Y'all take care and God bless.
Great idea!
Now you just need to automate it. Hook up a 3D printer with some spray nozzles and you got yourself a “Laser Touchless Dog Wash”, charge neighbors $10 per dog, retire from Perkins. 😊
Do a patent into it.
Turn it into business.
Jamison’s Red neck dog bath .
This is my favorite video so far. As a dog mom of three I approve!!!!
As a dad of 8 furry kids I have to agree, keeping our adventurous doggies clean is not always easy, but that set up is awesome ✔️
I use to bathe in the tub with my dog. He use to love it so much, he would jump into the tub whenever I went into the bathroom. When I moved.
Awesome!
I meant to end with, when I moved into my parent’s house, temporarily, when I was away, the dog snuck into the house and jumped into the bathtub with my twelve year old niece! She was not amused.
Whats up...hey are you going to end up doing a tree house? That would be a good video. That would go viral for sure
NICE!!
That looks amazing! That was such an amazing idea!
Ya
that's a really nice setup! it's def a pain to wash dogs but not with a system like yours! great work!
Dogs are easy CATS r another level 😅
You could make a walk in heated like they have for adults and market them
Nice one Jason! those pups will be the cleanest pups on your street!
Did you hook up the drain to something under your porch? Thought I saw some water leaking at 24:36 ?
Maybe use the left over part from the tub to make a door out of it. Then they couldn't walk out🤔
Clipping them in with the built in lead works great. They don't go anywhere. This project has been a game changer especially with wi ter coming. 👍
pool noodle for the sharp edges, get to the £/$ shop
Thats an awesome dog bath station, Jay. Great job!
Jerry not for nothing but I had a cousin on my wife had a cousin I should say used to take cold showers all the time and then one day they went to wake him up to go to work and he was dead because of the coldness in his body, your body supposed to be a certain temperature all the time if you’re cold you’re supposed to go inside and get warm. This is what happened to him I don’t hope it never happens to you but be very careful taking a cold, cold shower if you’re gonna do that you should have yourself a steam room first and then take a shower, cold shower and then go back in the steam room and then come out and take a regular shower and then get dressed. That’s how you actually do it, you don’t wanna hurt your heart you’re hot it will get a shock real quick when you jump into cold icy water. I’m just giving you a heads up. This is Alan from Massachusetts.
“trutherninski “ you are a Gabowski from Chicago!!
Not sure what that means but I’ll take it as a compliment!! Ha ha
Ummmm Jay ....... I think your dogs deserve a redwood tub! 😂
Hey Jay 👋
I have wanted to build one of these for a long time. Good job. Do you live with your in-laws? Those dogs are so lucky to have a creek to play in anytime they desire.
Yes my in laws live with us.
I love it, damn cool idea and well done. Really great.
I made it, Jay.. KUTGW
Wanted to compliment you on the video editing. I like that you are talking, but you are showing a different cut. Are you doing the video editing, or who might be? Keep Up The Good Work
Did you put Nana's greenhouse on the North side of the house???? Or south side????
East
Grab a short length of garden hose and cut a slit down the side. Lexel that hose over the sharp edges. Pool noodles will look like garbage.
Pro tip!
Some friends of the family put a regular shower pan in the mudroom at a comfortable height and hooked it up to the water system in the house. The building inspector was totally confused...took him a while to grasp the concept of a dog shower....
Please please build the shop. Get the boys to help you!!!!!
It’s coming!!
Say hey, Jay nice doggy care. 👍👍👍
That’s not only a fabric measure tape but also waist size.
Yes! It's my worst enemy! Lol
Jay's doggie day care ? 😅
my dogs nane is also addie .i thought i was being reginal
Hey, I don't know if anyone has mentioned this yet. I noticed that the dog shampoo you're using looks like Hartz brand. I've heard a lot of stories about people's pets getting seizures and other severe health complications right after using that shampoo. If you're still using it, I would stop and change to a more natural one. Hope this helps 👍🐶
I did not hear that! I will definitely keep that in mind.
what!! you don't measure your dogs all the time .
😂😂😂
I have measured my wiener dog 😮
Poor Steph 😢 she gets a freezer filled with cold water and the doggy's get a heated bath 🛁🚿❤
Funny, dogs will jump into cold creeks or ponds and love it.... but have no interest in you spraying them with cold hose water for a bath. 🤣
100%
Hmmm, do you think perhaps you should just buy a paddling pool to wash the dogs…..and show it on your channel because your killing your dogs street cred….!😁🤪
😂
Ice baths for the humans, warm bath for dogs, third world problems for sure…😂
Lol!!!
For sure! 😂
When the dog gets out and is still hooked it will run down the street dragging a tub !!!!
lol!! Nice last name!!!! You know that’s my last name!
Yes I know I share last names with you. I watch all the Perkins Builder Brothers videos. I enjoy every minute of the video. Every one on the posts make me laugh and we get to see you building something. Keep up the great work and content on your videos it’s just as great as the Perkins crews videos. Thanks