Thanks very much david! You're right about fighting with the rotation tool - it never seems to get things lined up quite right. Hopefully using the values helps speed things up a bit!
Same happened to me buy I know how to use it, the controls are confusing asf, T is forward transmission, hit the w key to actually go forward btw to go forward, g is lower transmission. Always stay at low gear btw, that makes your train drive forward too, high gear makes it go backwards
Excellent tutorial. Thanks for that. Is there a way to save a map with mods that I have already placed, such as a train consist, so that they are already set up the next time I open it?
I've done it but it's a little finnicky... If you're working on a map mod, it's best to unpack (extract) it into a folder called "unpacked" in your mods folder. You'll also need to delete the original .zip file. The game will still see it here and let you spawn into it like you normally would. What this means is when you're in World Editor and press 'Save', it will actually save the changes of the map into this folder and still be there when you go back to it. In terms of saving the trains in place, once you've spawned them in and you're ready to save, you'll need to select each of the train vehicles and on the right, make sure 'canSave' is checked under Persistence. Then save the map and this should keep the trains in their place the next time you come back to it. Hope it helps!
EVERYONE!!! PEOPLE WHO ARE STRUGGLING TO COUPLE YOUR CONSISTS, OPEN THE ENVIROMENT SETTINGS IN YOUR MENU(ESC), AND SET GRAVITY TO THE MOON PRESET!!! IT ACTUALLY HELPS A LOT!!!
This is a gerat video! I only have a problem where when I go back to the main game, I cant drive/interact with any vehicles. Can you help me with this? Also, a tutorial on how you get your thumbnails would be nice!
Thanks! You mean this is happening even after you close the World Editor? I know that some were having this problem while using the World Editor so I'll paste how to fix that below in case it helps. Of course too, make sure that your game is unpaused (J key). Check this setting: Click the gear icon along the top of the World Editor, click 'User Interface' on the left side of the window that opens, and make sure 'Enable Vehicle Controls' is checked It seems the game has defaulted to having this turned 'off' for some people. Hope it helps!
@@BNGFPlus This did help! Sorry for asking an abundance of questions but, do you have any tips for growing a channel? I’m quite new and obviously not as experienced as you. I’m still trying to piece together this whole UA-cam thing. Anything helps!
The locomotive keeps getting stuck onto the tracks. I've put it in the air, put it on the ground, but it just sticks to the tracks and will not move no matter how much power I apply.
Yup, it's a good suggestion. Sometimes they're backwards (i.e. trains 'facing' one way, tracks 'facing' the other) but you can certainly make the values opposite when that's the case. Thanks for watching!
it just won't work. I'm doing everything i can but it refuses to align because the rotate and move tool aren't alaigned with the train itself. I've been at it for an hour and it's fricking frustrating
Why is it that the coupling system doesn't work like, 90% of the time for me? I press L and see the green dots but nothing happens, and I made sure the cars aren't stuck in the ground or anything
Hmm, not sure what might be happening there... you can try perhaps rotating the train or boxcar to connect the couplers the opposite way. Also, make sure when connecting a bunch together, you start from the back of the train and work your way forward. Lastly, they do need to be pretty close together to couple. Try positioning the close by and you can also use the nodegrabber tool (hold ctrl+click) to pull the cars closer together. Hope this helps and thanks for watching!
How can you get railroad crossing signals that function and what kinds are there? What is the max amount of train cars you can have on a locomotive in this game
any train track mod? always wanted to make my own railway(like one going down the highway on roane county, not only would it be fun but it will be much better then the tracks already place since almost ALL of the tracks are so lazily placed that they just derail) but no luck.
To me, i can aglin the train on tracks, but only the race version works, when i place other trains and press the gas pedal (i shifted into M1) it wont work, only that super fast train works but it doesnt have a great livery, other train that dont work can be pushed but its not the same. help help help pls
Do you know how make train moving in Ai Mod window? For me i record how it move, after run script but train stand. It is only my issue or this scripting is not working for trains? Thanks for any info!
How do you get those things to pop up on the side of the edit menu. Mine does not show anything just the bar at the top. I want to be able to type in values.
When I couple the boxcars to the train and I crash, then when I reset the train and then reset one of the boxcars, the train slips off the track or if I reset the other boxcars, they all slip off the track. I don't know why that happens please help.
Ah yes, this is a weird behavior that I've noticed as well. It seems to have changed recently with one of the updates and I believe what is happening is it's trying to "auto-couple" everything together for you but in the process becoming misaligned. The solution/workaround that I use (which is kind of annoying) is to decouple everything manually before resetting the train and boxcars. Then, of course, re-coupling before driving it again. Hope this helps!
Hey i wanted to ask. Do you have any trouble running trains in 0.23? wanted to run trains again in beamng and i hear no engine sounds. its like if the train was just an object. cant move it or do anything. it spawn and i can blow the horn and bell and thats all. no gauges anything. Fresh install of beamng.
Personally, mine's been fine but you're now the third person who's told me that they're having an issue. I suspect maybe another mod is interfering with it? But I'm really not sure... hard to say that it's the update because I've updated to 0.23 and no issues here (someone else in my Discord said the same). That being said, one of the people who said they were experiencing this said that all they had to do was restart the game & redownload the train mod. Maybe that's all it takes? Good luck & post any updates here on the issue :)
The train I’m using (DMM512 Diesel-Locomotive) just won’t move, the engines on but it won’t move, I tried tuning on and off the engine and still nothing, and also deactivated the mod and renewed it and still didn’t move 1 bit
You're right, however, a fix is available on the forum thread here: www.beamng.com/threads/railroad-boxcar-wheels-are-missing.86621/ Hope it helps and thanks for watching!
I don't think it's possible using the track builder, however, train tracks can be imported from others maps and arranged on the map using the World Editor. I plan on showing how to do this in another video soon ;) Thanks for watching!
I can't connect the two carriages together now. Pressing the L key doesn't work, nor does the method in your video. If you have a solution, please tell me, thank you！
Yeah I hear you... it's a pain but you can always move the tracks with the World Editor if they're broken like this. Hope this helps and thanks for watching!
There's a fix available for that on the page here: www.beamng.com/threads/railroad-boxcar-wheels-are-missing.86621/ Hope it helps and thanks for watching!
Hi so cool viceo wish I found out about this sooner. I followed your video and there was another tutorial I watched. I followed both but I can't move my train. Is it me or is it the train because all the wheels are on the tracks (throttle up not possible)
Thanks a lot for tutorial! I watched all videos, Now I started making BeamNG videos! Can you tell me what is your BeamNG-FUN channel RPM? It will help me a lot, Thanks
Yes, use this mod: www.beamng.com/resources/driver-passengers-and-loads.2906/ And you'll need to fix it (as it's currently broken) using the fix seen on the video on this page: www.beamng.com/threads/driver-passengers-and-loads.47464/page-14 Hope this helps and thanks for watching!
That's interesting... I get the new World Editor when I use that map. I guess try making sure everything is up-to-date with the mod (and your game) the give it another try. You can also try clearing cache (not sure if that will help or not though).
Here's one that you can get: www.beamng.com/resources/rail-crossing-lights-props.17688/ There's another one that I use in my videos but the creator who provided it to me asked me to keep it private :( Thanks for watching!
I find pausing it, then spawning a box car in saves a little trouble too, that's just my prefered way to make it a little easier.
This is a GREAT tutorial! It never dawned on me to type in the values instead of fighting with the rotation tool - duh!!
Thanks very much david! You're right about fighting with the rotation tool - it never seems to get things lined up quite right. Hopefully using the values helps speed things up a bit!
@RopesZ if you have multiplayer that could be the problem
@@BNGFPlus hi can you show how to make Police Anti-Street Racing and i am your fan
Another way to line up the train with the tracks copy the 3rd rotation value from the tracks and paste it on the train.
😊
I love the sound of the train engine. It sounds like one of those jet engines on a plane
Thanks for the vid now I can have fun with trains too
Hope it helps! Thanks for watching :)
bro mine is lined up perfectly it just won't move
Sameee
Same happened to me buy I know how to use it, the controls are confusing asf, T is forward transmission, hit the w key to actually go forward btw to go forward, g is lower transmission. Always stay at low gear btw, that makes your train drive forward too, high gear makes it go backwards
Try looking at the wheels and see if is not connected to the track
Ty so much! You have been such a help with making trains! :D
13:59 i see railroad barrier 2 how to get it i can not found it on beamng but i will have it
i figured out why the train will not move because the controls are t and g for me
Excellent tutorial. Thanks for that.
Is there a way to save a map with mods that I have already placed, such as a train consist, so that they are already set up the next time I open it?
I've done it but it's a little finnicky...
If you're working on a map mod, it's best to unpack (extract) it into a folder called "unpacked" in your mods folder. You'll also need to delete the original .zip file. The game will still see it here and let you spawn into it like you normally would. What this means is when you're in World Editor and press 'Save', it will actually save the changes of the map into this folder and still be there when you go back to it.
In terms of saving the trains in place, once you've spawned them in and you're ready to save, you'll need to select each of the train vehicles and on the right, make sure 'canSave' is checked under Persistence. Then save the map and this should keep the trains in their place the next time you come back to it. Hope it helps!
@@BNGFPlus please do tutorial on this, how to save current project and when I open tomorrow, i can continue from there 🤷🤷
Thank you for the tutorials.
EVERYONE!!! PEOPLE WHO ARE STRUGGLING TO COUPLE YOUR CONSISTS, OPEN THE ENVIROMENT SETTINGS IN YOUR MENU(ESC), AND SET GRAVITY TO THE MOON PRESET!!! IT ACTUALLY HELPS A LOT!!!
This is a gerat video! I only have a problem where when I go back to the main game, I cant drive/interact with any vehicles. Can you help me with this? Also, a tutorial on how you get your thumbnails would be nice!
Thanks! You mean this is happening even after you close the World Editor? I know that some were having this problem while using the World Editor so I'll paste how to fix that below in case it helps. Of course too, make sure that your game is unpaused (J key).
Check this setting: Click the gear icon along the top of the World Editor, click 'User Interface' on the left side of the window that opens, and make sure 'Enable Vehicle Controls' is checked
It seems the game has defaulted to having this turned 'off' for some people. Hope it helps!
@@BNGFPlus This did help! Sorry for asking an abundance of questions but, do you have any tips for growing a channel? I’m quite new and obviously not as experienced as you. I’m still trying to piece together this whole UA-cam thing. Anything helps!
The locomotive keeps getting stuck onto the tracks. I've put it in the air, put it on the ground, but it just sticks to the tracks and will not move no matter how much power I apply.
When the power is apllied just push the forward ⬆️button on your keyboard
Click on the tracks to get the exact correct value, then input that value to the train.
Yup, it's a good suggestion. Sometimes they're backwards (i.e. trains 'facing' one way, tracks 'facing' the other) but you can certainly make the values opposite when that's the case. Thanks for watching!
Awesome tutorial. Thanks
Perfect
All setup are working but after the editing train not run why all are correct
it just won't work. I'm doing everything i can but it refuses to align because the rotate and move tool aren't alaigned with the train itself. I've been at it for an hour and it's fricking frustrating
Why is it that the coupling system doesn't work like, 90% of the time for me? I press L and see the green dots but nothing happens, and I made sure the cars aren't stuck in the ground or anything
Hmm, not sure what might be happening there... you can try perhaps rotating the train or boxcar to connect the couplers the opposite way. Also, make sure when connecting a bunch together, you start from the back of the train and work your way forward. Lastly, they do need to be pretty close together to couple. Try positioning the close by and you can also use the nodegrabber tool (hold ctrl+click) to pull the cars closer together. Hope this helps and thanks for watching!
@@BNGFPlus thanks!
@@BNGFPlus when I try to connect a boxcar to another boxcar it connects but if I try to connect a boxcar to the locomotive it doesn't connect
Cool
For some reason I can not find the sovietic train mod, where can I find it? (Thanks for the video and keep up the good work)
great video
After adding everything, which object selecting,
how can record ai script
Thank you
Great
How can you get railroad crossing signals that function and what kinds are there?
What is the max amount of train cars you can have on a locomotive in this game
really weird but all my box cars don't have wheels? I've tried vehicle config, unsubbing to the mod and subbing to it again, any thoughts?
i have the same issue and i dont know how to fix it
The gui at the right side doesn’t show up,what do I do?
Can U Give Me The Link To The RR Barrier 2?
It's private mod :(
in map polish roads when you have this station set rotation to 172.742
How do you get other train cars, like car trailer train cars, or flat train cars, or cars that you can fill coal or gravel with?
if anyone is still doing this and has the boxcar without wheels, go to the boxcar link and go to the comments theres a link for a fix there
i have a problem with driving the train. I place it right on tracks but it won't be going anywhere! I'm using BeamNG v 0.24. Any suggestions?
Just fixed it. Before moving you have to press T, so that train can save up some power for the start.
any train track mod? always wanted to make my own railway(like one going down the highway on roane county, not only would it be fun but it will be much better then the tracks already place since almost ALL of the tracks are so lazily placed that they just derail) but no luck.
My boxcars spawn with no wheels how do I fix that?
Any tips? My boxcars spawn also without wheels.
No
Been trying for 2 months still can’t find a way
If you go to the discussion tread on the mod you can find a fix one with wheels.
The train wont move after 10 times trying to fix it but never moves not even the smallest amount it doesnt move at all
my box cars it spawning with no wheels :(, how to fix?
Same
In my case, when I type cordy, it keeps falling off the tracks on las colinas
To me, i can aglin the train on tracks, but only the race version works, when i place other trains and press the gas pedal (i shifted into M1) it wont work, only that super fast train works but it doesnt have a great livery, other train that dont work can be pushed but its not the same. help
help
help pls
Hey! Great tutorial! Just wanted to ask if you make Beamng Drive movies? If so where can if I find it?
Oh ha ha never mind! I see it in the bio 🤟
Do you know how make train moving in Ai Mod window? For me i record how it move, after run script but train stand. It is only my issue or this scripting is not working for trains? Thanks for any info!
everytime, i try and spawn the train on the tracks, perfectly, the train doesnt move
hello do you know how to get the railroad barrier 2 (railroad crossing cantilever) awesome vid :))
are the carriages meant to have no wheels? I have that issue and i cant fix it
How do you get those things to pop up on the side of the edit menu. Mine does not show anything just the bar at the top. I want to be able to type in values.
Is there any other train mods? Or passenger cars?
I have a problem with the boxcar the wheels don't show up. Do you know what to do?
When I couple the boxcars to the train and I crash, then when I reset the train and then reset one of the boxcars, the train slips off the track or if I reset the other boxcars, they all slip off the track. I don't know why that happens please help.
Ah yes, this is a weird behavior that I've noticed as well. It seems to have changed recently with one of the updates and I believe what is happening is it's trying to "auto-couple" everything together for you but in the process becoming misaligned. The solution/workaround that I use (which is kind of annoying) is to decouple everything manually before resetting the train and boxcars. Then, of course, re-coupling before driving it again. Hope this helps!
yo dude where to get that car carrier i saw? its fire
where did you get the mod for the 2te10m diesel locomotive
Why does my boxcar spawn without wheels?
Why don’t the boxcars have wheels
ive tried atleast 5 different tutorial and none of them have worked. theres none from the current beam NG i have
Thx for the tutorial but when i spawn the box car it has no wheels
the rotate thing is really hard because it's laggy
how do i fix when i spawn the box carts it has no wheels
Hey i wanted to ask. Do you have any trouble running trains in 0.23? wanted to run trains again in beamng and i hear no engine sounds. its like if the train was just an object. cant move it or do anything. it spawn and i can blow the horn and bell and thats all. no gauges anything. Fresh install of beamng.
Personally, mine's been fine but you're now the third person who's told me that they're having an issue. I suspect maybe another mod is interfering with it? But I'm really not sure... hard to say that it's the update because I've updated to 0.23 and no issues here (someone else in my Discord said the same). That being said, one of the people who said they were experiencing this said that all they had to do was restart the game & redownload the train mod. Maybe that's all it takes? Good luck & post any updates here on the issue :)
Yea but how do I make the train drive. I can make it turn on and everything. But it won’t drive
The train I’m using (DMM512 Diesel-Locomotive) just won’t move, the engines on but it won’t move, I tried tuning on and off the engine and still nothing, and also deactivated the mod and renewed it and still didn’t move 1 bit
try pressing "t" to increase throttle and "g" to decrease throttle
then put into gear with up on the arrow key
@@earlobe8673 I figured it out and that’s true, you do need to put it in gear but my buttons are (t) for up a gear and (g) for down a gear
@@johnnytom84k Glad you found out how to use it!
my boxcar nothing the wheels, what i do?? thank
Very awesome tuto tyvm.
Unfortunately since 0.25, wagon's wheels dont appear.. Do u Know how to fix that ?
You're right, however, a fix is available on the forum thread here: www.beamng.com/threads/railroad-boxcar-wheels-are-missing.86621/
Hope it helps and thanks for watching!
Hi this is awesome, can u make a video on how to build train tracks like track builder for roads …?
I don't think it's possible using the track builder, however, train tracks can be imported from others maps and arranged on the map using the World Editor. I plan on showing how to do this in another video soon ;) Thanks for watching!
@@BNGFPlus Thank you 😊
For some reason the train won’t drive even when I unpause the game and I have a feeling I’m doing the wrong thing.
okay but i havge trouble with new version of of f11 editor
For some reason the boxcars spawned without wheels
same
@@pixel-y-tsame dude I'm sad
I can't connect the two carriages together now. Pressing the L key doesn't work, nor does the method in your video. If you have a solution, please tell me, thank you！
Cool but how do i make my own train tracks :/ cant find answer to it
what key is it to go forward? is there a curtan transmition or what?
you have to hold t to increse the pressure and then u can drive
wait how do you get the railroad barrier 2
one thing that really annoying, is the track in some maps have gap between them. So train do get derail on these
Yeah I hear you... it's a pain but you can always move the tracks with the World Editor if they're broken like this. Hope this helps and thanks for watching!
@@BNGFPlus 7gbq
I have a problem with the boxcar that when I spawn it the wheels are missing on the boxcars so can anyone help me?
There's a fix available for that on the page here: www.beamng.com/threads/railroad-boxcar-wheels-are-missing.86621/
Hope it helps and thanks for watching!
But if I push gas it won’t move what should I do?
the box cars mod doesnt work anymore
how to drive it i did every this good and rpms dont move
Where do you get the Russian Passenger Wagon?
i cant do it the train tire keeps turrning let and right
It is great I 😍 it
the train wont MOVE GODDAMNIT
Nice👍👍👍
How do you have wheels on the box car. Because when I do it has no wheels.
yedw
uy
r
r3
5w4hiy
gwb8h
/ijemn45
nggw43bgbiue4iu
ewbiuyevberu
eueieoiotioirrtrrtreeutwiuufjhdf
Hi so cool viceo wish I found out about this sooner.
I followed your video and there was another tutorial I watched. I followed both but I can't move my train. Is it me or is it the train because all the wheels are on the tracks (throttle up not possible)
Can you please show us how to get that Russian passenger wagon? I am making a BEAMNG film, and it would really help!
How do you get the editor thing on the right cause i cant find it
Go to window and click inspector
I m a bit late lol
wen i spawn the boxcar, the wheels is not there. so i have to use a russian tanker wagon :(
Hello sir nice video I have done everything 10 times My train put on track but it is not moving no sound nothin plz help
Check if your engine on and if your parking brakes are on turn them off by pressing p or space and press t to accelerate and g to slow down
Thanks a lot for tutorial! I watched all videos, Now I started making BeamNG videos! Can you tell me what is your BeamNG-FUN channel RPM? It will help me a lot, Thanks
How do I get to the inspect menu?
how do put the train into reverse?
👍👍👍 How to place Tracks in map bro ????
Hey does anybody know how to add passengers into a vehicle? I could only find the dummy for a driver in the repository
Yes, use this mod: www.beamng.com/resources/driver-passengers-and-loads.2906/
And you'll need to fix it (as it's currently broken) using the fix seen on the video on this page: www.beamng.com/threads/driver-passengers-and-loads.47464/page-14
Hope this helps and thanks for watching!
How do i get the new railroad crossing
Класна как сделать поезд в бимонжедрайва
Second time saying this how do I fix The boxcar
my train is not moving i did everything required
Try pressing on the throttle (T key) first and then accelerate. See if that works. Thanks for watching!
@@BNGFPlus yeah it works thanks mate🙂
hello i have a problem throttle not working
When i use the map polish roads my world editor is the old version do you have any tips to fix it?
That's interesting... I get the new World Editor when I use that map. I guess try making sure everything is up-to-date with the mod (and your game) the give it another try. You can also try clearing cache (not sure if that will help or not though).
@@BNGFPlus ok
@@BNGFPlus also how do you check if your game is up to date
where did you find rail road barrier 2?
Here's one that you can get: www.beamng.com/resources/rail-crossing-lights-props.17688/
There's another one that I use in my videos but the creator who provided it to me asked me to keep it private :(
Thanks for watching!
My translate up and down does not work can anybody help me?
My boxcar don't have wheels how can i add wheels in train boxcar