The printer doors might not be closed properly. Check if the door of the toner cartridge and rear cover are properly closed. It could be a sensor problem.
Reset the printer: Turn the printer off using the power switch, wait at least 30 seconds. If you are using a surge protector remove the surge protector and plug the printer directly into the wall socket. Turn the printer on. If the error persists disconnect any net or USB cables then reconnect the cables and turn the printer on. Update the firmware. Does the error is always present?
@@viandant5 penso di si, lampeggia sul display e anche l'icona arancione dei fogli. Ho già tolto il cassettino e rimesso e aperto dove ci sono tutti i sensori ma persiste
@@viandant5 non mi sembra sia una "G" ma più un 9 e °, successivamente poi riporta 01 E fa un rumore tipo di inceppamento ma provando a stampare il foglio che riporta l'errore riesce senza problemi, dall'app dice "impossibile stampare"
@@maurovazquezcrossetto8609 Probably you have to change the network card. Try to change the IP address. It difficult to say without checking the machine
it could have lot of causes. for start if you are using a surge protector, remove it. Plug the printer directly into the power outlet. discinnect the USB cable and all network cables if present. remove and reinstall the printer driver
Thank's sir..
What if the attention light is blinking without an error codes?
The printer doors might not be closed properly. Check if the door of the toner cartridge and rear cover are properly closed. It could be a sensor problem.
What if I replaced the toner with a new one and still printing papers with white shadows as if the toner is almost finished?
May be the fuser unit, or the transfer roller
hello, i have the m236sdw model, error 79, could you help?
Try to cancel all works in the printer queue, remove and reinstall the printer driver
So how do I fix the door open error? Do I need a new part?
Check the connector, check the sensor and the flag of the cover
Hello. I have the M234sdwe model.error 79, how to fix it?
I also had this error today on my M234sdwe
I think for start you can try to remove and reinstall the printer driver.
I have an error 49 HP LaserJet M236sdn.
ua-cam.com/video/qhfsFbE3XSc/v-deo.html
Error 75 please thank you
Which printer? is it a HP printer?
@@viandant5 HP MFP M234DW. Code 75
@@rosettakelley7790 It could be a firmware error, or wrong configuration of the printer. Try to reinstall the driver.
Hello sir,
I have the M236sdw model.
Er 76 with almost all the icons blinking. Could you please help ? Thanks !
Reset the printer:
Turn the printer off using the power switch, wait at least 30 seconds. If you are using a surge protector remove the surge protector and plug the printer directly into the wall socket. Turn the printer on.
If the error persists disconnect any net or USB cables then reconnect the cables and turn the printer on.
Update the firmware.
Does the error is always present?
Hello thank you for the method. Firmawre updated. Now i have the Er 50. I replaced the fuser unit but still have the Er 50.@@viandant5
@@MrTrundrumbalind if the error remains I think it's a main board problem, or the connector with the main board
@@viandant5 i have the same problem, i followed all the steps, same issue
@@albertotorres6546 it could be the main board
My M232 have "rd" error code now! I learned that I have to download the correct .rfu file to fix it,can you help me? Thanks!
Do not download anything. Reinstall or update the firmware of the printer
@@viandant5 i also have this RD error - now computer can't see printer
@@gk15gk Reinstall the printer driver
@@viandant5 How? when i try to install new drivers i have menu which printer need drivers. Program can't see my printer
@@viandant5 i have no connection to printer. computer shows me that i connect hp 3020 to the usb...
i have 234dwe
Errore 9° 01 che esce all'inizio subito dopo l'avvio della stampante?
Già provato a resettare ma continua a presentarlo ad ogni accensione
Errore 9° 01non l'ho mai sentito, sicuro che sia quello il codice?
@@viandant5 penso di si, lampeggia sul display e anche l'icona arancione dei fogli.
Ho già tolto il cassettino e rimesso e aperto dove ci sono tutti i sensori ma persiste
Forse si intravede nel video dove fai vedere gli errori
@@francescowenter1626 G001? al minuto 9:18 ci sono dei consigli
@@viandant5 non mi sembra sia una "G" ma più un 9 e °, successivamente poi riporta 01
E fa un rumore tipo di inceppamento ma provando a stampare il foglio che riporta l'errore riesce senza problemi, dall'app dice "impossibile stampare"
error rd?
probably if you update printer driver will resolve the error. better to download it from HP website using a USB cable
0 rd ?
error 49 ?
ua-cam.com/video/qhfsFbE3XSc/v-deo.html
error 80?
it is associated with a defective or not compatible network card.
@@viandant5 solution?
@@maurovazquezcrossetto8609 Probably you have to change the network card. Try to change the IP address. It difficult to say without checking the machine
Error 49
it could have lot of causes. for start if you are using a surge protector, remove it.
Plug the printer directly into the power outlet. discinnect the USB cable and all network cables if present. remove and reinstall the printer driver
Error 76 plz
Is the printer connected with wifi? Try to reinstall the printer driver downolading it from HP website
error 79 please
Try to disconnect any USB cord or other device, reinstall the driver
error 58
7:41
Error41
Hello 49 error plz solution
You are trying to do an operation not supported by your printer or firmware. It could be a firmware problem
Error 49 plz help me
@@viandant5 Not solve firmware problem after updation.
Facing right now or resolve?
@@gsssnandpur1403 It could be the network card, the memory card, the main board
error 61
It could be a printer driver or firmware issue, try to reinstall the driver but probably it's related to the main board
erro 75
It indicates a problem with the paper feed or a paper jam.
Error41
Try to restart the printer spooler on your PC. uninstall the printer driver and reinstall it. There could be missing or corrupted system files
error 40?
Communication error between PC and printer. Check the cables, reinstall the printer driver