Thanks for the video brother......you gave me new motivation and an idea for my bobber build on my classic 900. I didn't want the bulky headlights and lightbar. I already replaced my main headlight with a halo and was looking for options on the turn signals...this will definitely fit the bill.......RIDE SAFE
If nothing else, you can open up the headlight bucket and run the resistor wires through the bottom hole and store them in the bucket, that way you won't have to worry about them getting pinched, or rerun them under the tank. There are many possibilities, where they are at is fine too if you like them there
I had the same issue on a used Vulcan I purchased with the led rear blinkers installed, when using left or right blinker they would both blink together. The fix I found was removing the incandescent blinker indicator bulb that is next to the neutral indicator bulb on speedometer. You may need to upgrade this bulb to LED too and won’t need the resistors Soon I will install led front blinkers similar to yours, have a link for them? The link in description doesn’t have Kawasaki
You didn't have to cut the wires on your old turn signals - if you open the headlamp, there is a quick clip on each side that you can disconnect the wires of your old turn signals - to save them for reuse or resale.
@@garywatkins9954 No Video. The Kawasaki turn signals have quick click ends. Take off the two screws on either side of the headlight, take off the front retainer ring so you can remove the reflector, and tucked up behind it is the wiring for the turn signals - just unclip old & clip in new.
Thanks for the video brother......you gave me new motivation and an idea for my bobber build on my classic 900. I didn't want the bulky headlights and lightbar. I already replaced my main headlight with a halo and was looking for options on the turn signals...this will definitely fit the bill.......RIDE SAFE
No problem brother. That's why I do the videos. You ride safe as well. 🤙
Where can i order the lights from that you have for the turn signal leds?
Amazon
Hey can you make a video update on how you made them like there supposed to work . mine are doing the same thing
Sorry, not sure how I missed your comment. I just added the led load resistors and they work just fine now.
If nothing else, you can open up the headlight bucket and run the resistor wires through the bottom hole and store them in the bucket, that way you won't have to worry about them getting pinched, or rerun them under the tank. There are many possibilities, where they are at is fine too if you like them there
I'm definitely going to be moving them. This was just temporary because I had a ride that day and didn't have enough time to make it look better.
I had the same issue on a used Vulcan I purchased with the led rear blinkers installed, when using left or right blinker they would both blink together. The fix I found was removing the incandescent blinker indicator bulb that is next to the neutral indicator bulb on speedometer.
You may need to upgrade this bulb to LED too and won’t need the resistors
Soon I will install led front blinkers similar to yours, have a link for them? The link in description doesn’t have Kawasaki
I was looking for the same thing i was wondering it the Amazon ones are any good ?
That's where I got these. Put about 1000 miles on it with them and no issues yet.
Thanks man
No problem!
Hi. What are the specs on the resistors you got?
Not really sure. I bought a 20 pack off Amazon by searching led load resistors
@@JustAnotherCarDude Found them, thank you! 50W 6 Ohm.
Where can i get the indicator bulbs, I am trying this on my 2008 vulcan
I got them from Amazon.
@@JustAnotherCarDude do you have a part number, i saw several
Here is the link to the ones I bought www.amazon.com/dp/B08BR9W64Z/ref=cm_sw_r_cp_apa_glt_fabc_NX2ER1F1G13CPH8YAC19?_encoding=UTF8&psc=1
You didn't have to cut the wires on your old turn signals - if you open the headlamp, there is a quick clip on each side that you can disconnect the wires of your old turn signals - to save them for reuse or resale.
Do you have a video for replacing the turn signal from the head lamp?
@@garywatkins9954 No Video. The Kawasaki turn signals have quick click ends. Take off the two screws on either side of the headlight, take off the front retainer ring so you can remove the reflector, and tucked up behind it is the wiring for the turn signals - just unclip old & clip in new.
Link to the led indicators??
CoCsmart 2PC Flexible Switchback Dual-Color White & Amber Motorcycle LED Fork Turn Signal Blinkers DRL Daytime Running Light Waterproof Adjustable Stips Bars kit Universal Fit Motorbike (39mm-70mm) a.co/d/dKXKur1
2 prong signal relay