How to make your own
Вставка
- Опубліковано 29 чер 2022
- Check link below if you would like to get this convection kit
www.cryptomininglab.net/produ...
www.overclockingbits.com/prod...
in this video we will be testing a New water cooled conversion kit for the Antminer S19 series from a regular S19 air cooled to a S19 liquid cooled
#immersion #antminers19 #btcmining #overclocking #btc #immersioncooling #liquidcooled #watercooling #btc #cryptomining - Наука та технологія
Check link below if you would like to get this convection kit
www.cryptomininglab.net/product-page/antminer-s19-water-cooled-heatsinks
www.overclockingbits.com/product-page/s19-water-cooled-kit
in this video we will be testing a New water cooled conversion kit for the Antminer S19 series from a regular S19 air cooled to a S19 liquid cooled
I've always wanted to know how these work. Thank you! I already have an immersion system setup that could dissipate 6,000W. I might as well use this water block right away. Very much interested actually. Vnish has their own water blocks overclocked to 170T!
Cooling side is the only down side of this kit , but if you already have a dry cooler , this is a very good option for canceling noise and more hashrate , I’m working in putting together a complete kit including the water cooler ( dry cooler ) as well as the rear cover , stay tuned
Your video is great! Very thorough in what it says. I hope to get in touch with you.
Glad it was helpful! and you can always reach out thought our website www.cryptomininglab.net/contact-1
Size it for a dry cooler and pump, install Braiins OS+, fire it up and lets see its hashboard numbers and chip temps.
I'm curious if the other side of the board with air-cooled sinks would need some air flow? I like the water-cooled heat sink system for running one or two miners because it costs much less than a tank system. The thermal conductivity of dielectric fluid is also just 25% that of water, so you don't need a bigger dry cooler and heat exchanger to compensate for this.
Will definitely do that , i’m Just waiting for Custom dry cooler , when I said mid size dry cooler , I meant smaller than the one used for immersion cooling , since couple units of s19 wouldn’t require such a sized dry cooler , will post an update after testing it , cheers
Do the inlet and outlet come out of the miner box enough to 3D print a back cover and have them come through with holes with o-rings? It looks like it from the video but it’s hard to tell without a side view.
The intel/outlets are not long enough , but I’ve seen another version with longer ones , which should work perfectly
I feel like you will need a radiator with fans on it to keep the liquid cool.
Yes and that’s what I did , check the channel us more videos update on the dry cooler for that unit
we need part 2 please 🥺🙏🏼
Will do , as soon as our the whole thing together with a cooler
Hi. Can I ask you some questions about these parts ?
Sure you can reach me out through our website , the link is in the video description
Thanks, been wondering where to get these
available here as a full kit including dry cooler , or just water cooled plates
www.cryptomininglab.net/product-page/antminer-s19-water-cooled-heatsinks
Did you get temps?
check this short update video , got a small dry cooler connected to it , and temps where under 70
ua-cam.com/video/4kFfwvqpNqo/v-deo.html
I want to buy this system but don’t know how to safely remove the heat sinks on the S19. You skipped right over this in the video. Do you have any videos of this?
from 6:42 to 6:52 you can see the whole processing of removing the heat sink , nothing complicated , just go easy when you try to pull of the original heatsink out of the board
Thank you for the video.
What's the water flow rate?
the pump i used is 350W with 40L/M max fl;ow
Would you throw a link for thermal paste you used?
I’ve bought the thermal paste from a shop , but any thermal past with 3.5 to 4 W heat dissipation will work perfectly on the S19
Hello, can the kit also work for S19J?
Yes it can be used for the S19J , we just need to know the exact model !
Could you suggest miner.i have electricity fr.... what Miner i buy.i want money big amount per month.
well depends on your budget , profitable miners are more expensive , so if you have free electricity doesn't make it free to mine since you need to purchase the miners first , cheap miners make less profit , and profitable miners cost more money so its up to you to choose which way you want go
where we can order these leave a Link please
There is a link in the videos description
www.cryptomininglab.net/product-page/antminer-s19-water-cooled-heatsinks
Or
www.overclockingbits.com/product-page/s19-water-cooled-kit