Відео

no , no where near the noise from a regular antminer , you can run these at home no issue

@@Crypto_mining_lab amm .thanks for reply❤

@@toddpeterson5904 as far as I know there is no OC FW , but I’m sure they will be one near future

you can reach me on whatsapp ,you can find my number on the contact page , here is the link www.cryptomininglab.net/contact-1

for dry cooler the system comes with a 45KW , if chiller is required than a 5hp chiller plus 40kw dry cooler will work fine for hot climate

Here you go ua-cam.com/channels/wBxjPjVnmt7P-2XiJM-N6g.html

you need more hashrate , that was before halving

Yes you casn overclock the S19XP hydro with Asicshield Firmware , the cabinet can support up to 7k per miner , the original consumption for the S19 Hydro is between 5.2 to 5.5KW

@@Crypto_mining_lab Thank you! That's great. Can you also overclock the S19 Pro Hydro 198T with the firmware?

Yes you can

yes absolutely

try some of the after market firmwares such as Vinish , you can lower that mini to 10 C i think

here is the link www.asicshield.com/shop

Hi , you can contact me through our website , also whatsapp the phone number is on the contact page www.cryptomininglab.net/contact-1

it doesn't require much energy compared to the miners them self , between the pump the fans you are looking at 300W consumption

Well to start i don't think anyone is using Nice hash , if you have been in mining you know that there are larger pools than nice hash which doesn't even made top 10 pools when it comes to hashrate , i have nothing against noce hash but personally i dont use them its a very new pool and their hashrate is low for btc

@@Crypto_mining_lab so what would you recommend ?

you can check pricing on the website www.asicshield.com/shop and if you have question you can use contact form www.asicshield.com/contact

yes they need some kind of system to dissipate the heat , so they needs a hydro cooling cabinet if you have many miners , or a small radiator if you have one or two units

its not , you must have reversed the inlet and outlet piping , the inlet should be on the hasboards and outlet at the PSU

Can you also tell me where is the inlet and outlet in the radiator maybe I reversed

Sure you can reach me out through our website , the link is in the video description

its not a problem as soon as you start the chiller there is enough pressure to keep it strait , but thanks for the tip

@@Crypto_mining_lab Thats good :)

it will help a lot if you can send a full load after starting the miner you can email it to : info@crypomininglab.net

@@Crypto_mining_lab your email not working

if you are referring to the power cord for the miner , it is the standard cable form bitmain for S19 Hydro , if you referring to the cable coming from the main breaker to the the miners breaker , then it will depend on how many miners you running on a single cables

Check it here , there are other sizes as well www.asicshield.com/immersion-cooling-system

have you ever thought about geothermal cooling the fluid? I am trying to design a system presently.

Check out our website we have the kit listed there , if you have specific request for different miners , feel free to use the contact page to email us www.cryptomininglab.net/product-page/antminer-s19-water-cooled-heatsinks

@@Crypto_mining_lab Where can I find the specs? I don't see any info on e.g. dimensions of the plates.

Please use the contact form on our website to send your questions , and I’ll be happy to respond to any of your inquiries , we have some offering for hosting , use this lock to contact us : www.cryptomininglab.net/contact-1

You can use any liquid based in your location, if you are located in a cold area you can use antifreeze , otherwise regular water will works just fine , it’s a close loop system so you are not wasting any liquids

@@Crypto_mining_lab I read in some miner data sheets where they had recommended quite low conductivity water. Would normal Dubai tap water suffice for the hydrominers?

Regular water will work just fine , of course pure water would be best , but it’s not a must

The S19 hydro and S21 hydro are the same in terms of cooling requirement , so what works for the S19 will definitely work for the S21

Have you bought S21 HYD?

Yes you can use our website to contact for more details on setting up a farm in the UAE , for the KA3 we using btc tool

When you say the same you mean similar , the cooling capacity on the radiator I was using is 15kw , and water pump flow is 25. L / min , so I’m sure you using something similar but not the same , that’s why you having overheating issue

This was done in China for your information all mining pools are banned in China , so the pools we used is a private pool , you can see the pool address used , that’s why

@@Crypto_mining_lab I did wonder about the IP in the stratum. Thanks for the info hash on!

Because the customer has a lot of space there , can use the power available there

Is power cheaper on the farm ?

all hydro miners run on 3 phase 380/415V 50/60Hz

I dont know anyone with 3ph at there house. Is there a way to convert it over to single phase.

You need to be more specific on your setup as well , you meyiihdd a 100kw dry cooler , a 100L/ M pump but you don’t mention anything number about the number of miners you have , because when you say you have same setup people will assume that you are running two miners with 100kw dry cooler and 100L/m flow pump which is completely incorrect

@@Crypto_mining_lab As I specified, in the first message, the same configuration, i.e. fixed the same number of asic-s, and the same model. Now it's clear...?

Only if you are in a cold location , otherwise it’s gonna be hard for the cooler to keep up with miners

check the channel, plenty of videos showing different hydro system running , this is one for reference ua-cam.com/video/A14DlvVCYRg/v-deo.html

yes definitely we can deliver to the UK , for installation the system is plug and play you just need an electrician to connect the main power cable and a plumber to connect the piping between the Dry cooler and the cabinet , we supply everything with the system

Very quite actually , you have the dry cooler outside make some noise but nothing loud , you can’t even hear it few meters away

@@Crypto_mining_lab Ok thank you

more cost effective compared to converting every air cooled miner to hydro with water blocks , we do have other setups with hydro , there are plenty of video on the channel you can check

use the contact form on our website , you also have the email and phone number on the contact page , here is the link www.cryptomininglab.net/contact-1

it all comes down to the total of the hashrate you have , the more hashrate the more bitcoin you can mine , although its takes a lot of power and miners to mine one bitcoin in one day

We have our own dielectric fluid and been using it for couple years without charging it

currently using F2pool firmware i'm using Asicshield firmware for both Antminer S19 and Whatsminer

the temps of the coolant out of the miners is usually between 65 to 80 C depending on how efficient is your cooling , and you can definitely reuse the heat for other purposes

Email me through our website regarding mining license in the uae