I have an excellent tip for you. Say you need a 900mm flat bar, you would buy a metre long flat bar, cut in into 100mm lengths, then weld together 9 pieces
Some pretty cool little ideas there. At least to incorporate into other ideas. Good job! Now… let's talk about the music… shall we? I was near jumping out of my window and imagining it was on the 10th floor… and hoping that if I really believed it, THAT would kill me?
Muy buenas ideas casi todas, aunque la última es innecesaria ya que sabiendo cargar la pala, no necesita ruedita. Por lo demás, muy bien! ------ Very good ideas almost all of them, although the last one is unnecessary since to know how to load the shovel you do not need a wheel. Everything else, very good!
На 14:15 удивился назначению инструмента. Думал, одна из насадок с "будки для самоубийства", родригез заценил бы) Но инструмент кажется эффективным, должен заметить
This is the sort of thing that YT and the internet was made for. To raise your intelligence and to better yourself. Not look for more utter nonsensical drama that's not in your location.
watching you weld, i think you should seek out some instruction, because it doesn't look good. keep practicing instead of just doing a series of tack welds
Exactly my thoughts... Clean your metal BEFORE you weld all the rust /paint into it... And practice more.. Idea's 6 out of 10 (most are copied from other sites) Welding 2 out of 10
6:50 - Save some time and buy a brand new one for $4-5 17:20 - Why not just use a ratchet and socket? 🙄 25:30 - Yes, then we can destroy all our tools for no reason. This is idiotic. 27:19 - I have absolutely no words for how stupid that is. 🤣
Of course... if you have more money than time... and... if you have access to supply. Many don't. Then there are those who would rather not enrich China's economy at the expense of their own. Lots of reasons to be a maker. I want this guy on my side as the zombi apocalypse approaches, not some couch potato with a remote and a credit card. This guy saved more sh*t from the landfill in one video than most of us discard in a day. I say... BRAVO, Mr Technic! Keep on a makin'.
Я тако замок делал, он открывается когда на себя дверь сильнее потянешь. Проверено, надо немного больше загиб внутри языка делать, как клюв у орла, тогда на кругляше будет держать при открывнии. А открывать с обратной стороны, так можно с низу в язычку приварить пятак, а с обратной стороны проверить отверстие для толкания этого пятака(защёлки) можно использовать штырь, гвоздь и тд.
the idea 1 is frankly bad and it won 't last that long + only under 1 diameter , which makes no sense 2 is too expensive relative to analogues from the store 3 uses constantly 4 only in rainy places where plants have a small root system 5 there are cheaper analogues from the store 5 damage to a cheap tool is no more than 6 option normal , but from quickly the cut needs to be done , what needs to be cut here will not work out because of the thickness of the metal 7 the idea is successful , but it is made because of the gear very expensive to the problems of the idea that it will not work if the bolt is really sour 8 the idea is not applicable to shovels of small cubes because coal or other heavy loose muck is not tolerated in such conditions with the right level floor .
Yeah then you would have to tighten and loosen your vice every single time as well as make sure that your mark is perfect every time before tightening device. There's a reason why they make benders, if you need to pump out a bunch of these twisting your vice a million times is a big waste of time and energy
Научись варить. Ни фаски, ни режима, ни направления электрода, ни совместимость свариваемых сталей. Не зачищены свариваемые поверхности. Я уже молчу про сварку точками куда рука упадет. Чел даже не знает минимума для работы. Зато толпа гавно хавает, многие любят потупить не включая мозги. А каналы с профессионалами сварщиками набирают мало просмотров, нужно же вникать и понимать, а это так "трудно".
Great solutions for problems that dont exist
В любой непонятной ситуации приваривай подшипник👍😁
Good tools and a smart person thank your post... 💪👉👏🏼👏🏼😍👍👍.
I have an excellent tip for you. Say you need a 900mm flat bar, you would buy a metre long flat bar, cut in into 100mm lengths, then weld together 9 pieces
Exactly a lot of solutions to problems that I don’t have
Thanks for saving me 27 mins of my life
@@dirtfarmer747211
Glad you trust your welding
Good prep and proper penetration is overrated apparently lol
Because I sure wouldn't
@@davidhattenburg2609 worst welds ever
बहुत ही काबिले तारीफ हुनर है आपके हाथ में । आपका प्रोजेक्ट बहुत ही अच्छा लगा । धन्यवाद
Congratulations my friend I am amazed!!!
Thank you very much!
its another great idea thank you for sharing
Видео класс!!! но музыка по голове прям бьёт!!!!
Thanks👍👍👍
Good work 👍👍👍👍👍👍
Watchng your vdo 4 d 1st time n i like it. So i jst subcrbd.
1st vote for #1.
If you can drill a wrench you have quality tools
Some pretty cool little ideas there. At least to incorporate into other ideas.
Good job!
Now… let's talk about the music… shall we?
I was near jumping out of my window and imagining it was on the 10th floor… and hoping that if I really believed it, THAT would kill me?
Super 👍.
Thanks for sharing!
spent more in electricity, materials and time building that door latch then it would have been to pay 4 bucks for one. lol
Maybe he didn't have 4 bucks
I bet you one you buy wouldnt be as good
very good idea as a result it is very useful tool for making rings / stirrups 👍👍
Alangkah lebih bagus bila ditambahkan cat/pelapis.
Trimakasih untuk ide nya.
Quá hay. Cảm ơn bạn
Nice 👍❤️❤️
Gracias por compartir tus conocimientos y videos
nice
I only realized at 9:45 you were the Tyr It Out guy, keep 'em high and tight jeans, see you in may, and it's hot out so remember to drink water!
I loved every moment of this video 🤸♀️🤸♀️🤸♀️🤸♀️
Excellent 👍
Muy buenas ideas casi todas, aunque la última es innecesaria ya que sabiendo cargar la pala, no necesita ruedita. Por lo demás, muy bien! ------ Very good ideas almost all of them, although the last one is unnecessary since to know how to load the shovel you do not need a wheel. Everything else, very good!
На 14:15 удивился назначению инструмента. Думал, одна из насадок с "будки для самоубийства", родригез заценил бы)
Но инструмент кажется эффективным, должен заметить
شكرا جزيلا على الدقة في العمل و بساطة طرح الفكرة.
Said it before, say it again. Never weld a bearing!
Nice bro 😄👍🙂 please 🙏 hlp
Love the creativity on display here.
Like we knew you would.😄
You spent many hours and lots of cash....to make a $2 gate latch! 😂
He probably had the material, the skill , time and tools to do this in the comfort of his own home, why waste the money
Very very good work 👍👍👍 on
Demo videos don't need a stupid music track! Raising awareness.
Thích thích thích
Great ideas, now I just need a shop and all the tools to do that. $50-100k
The shovel hack reminded me of my new sneakers that made me run faster...
This is the sort of thing that YT and the internet was made for. To raise your intelligence and to better yourself. Not look for more utter nonsensical drama that's not in your location.
sir, post a video for sliding gate double latch
что за болезненная страсть, сваривать подшипники, ключи, резьбы?...
Calling this a painful passion hahaha these comments are gold!
watching you weld, i think you should seek out some instruction, because it doesn't look good. keep practicing instead of just doing a series of tack welds
Exactly my thoughts... Clean your metal BEFORE you weld all the rust /paint into it... And practice more..
Idea's 6 out of 10 (most are copied from other sites)
Welding 2 out of 10
Ingeniería de anticipación !!!
Awesome ideas 💡. Subbed 👍🇺🇸
You make vacuum cleaner pipe one for drill bit all the dues vacuum by vacuum cleaner
Exelente gracias por compartir
Excelente video gracias x enseñarnos
Waouuuuuu 🤗😂😂👍👍👍
Merci j'apprécie beaucoup vos vidéos frères
Good job
As suas ideias são maravilhosas e um trabalho não tão simples assim valeu tudo de bom
Мега лайк
The shear idea is good but not perfect, good job.
6:50 - Save some time and buy a brand new one for $4-5
17:20 - Why not just use a ratchet and socket? 🙄
25:30 - Yes, then we can destroy all our tools for no reason. This is idiotic.
27:19 - I have absolutely no words for how stupid that is. 🤣
Mr. Technic got his music from Mr. Techno!😂🤣😂🤣
You spend alot of time making things that would take less time and money to buy
Of course... if you have more money than time... and... if you have access to supply. Many don't. Then there are those who would rather not enrich China's economy at the expense of their own. Lots of reasons to be a maker. I want this guy on my side as the zombi apocalypse approaches, not some couch potato with a remote and a credit card. This guy saved more sh*t from the landfill in one video than most of us discard in a day. I say... BRAVO, Mr Technic! Keep on a makin'.
Ну этот рукоблудец хоть не красит свои извращения перед тем как выкинуть
Even with modern day tools, still third world.
о, сварка подшипников?! срочно вызывайте экзорцистов!
Where did you find that pinion gear for the slide hammer? I've been looking for that gear for a project.
Certain. A shame to use it for that as it can be replaced with any object that has weight.
По ходу у человека много металлолома. Проще сдать металлолом и купить инструменты.
.muito bom 👍
Доктор после просмотра этого видео, рыдает над взорвавшимся полнохуйняметром....
Доктор шкалу новую заказывает в наноляхах
Gostei,super engenhoso
Exceptional nonsense. Such inventions are useful on a desert island.
Verynice
Buenas ideas caseras útiles te agradesco
I've never seen a round saw blade with out a center hole. 🤔
Проеб времени, думал последнее будет по-любому что-то годное, но блять там оказалась лопата... Серьезно подшипник+лопата Карл..
А как такой запор с наружной стороны открывать?
El vídeo de mas cosas voludas o inservibles que vi ,parece un chiste ,cuando lees y que dice buenas ideas
Galing👍
отличный замок на втором видео а если захлопнулся за тобой как с той стороны открыть??
Я тако замок делал, он открывается когда на себя дверь сильнее потянешь. Проверено, надо немного больше загиб внутри языка делать, как клюв у орла, тогда на кругляше будет держать при открывнии. А открывать с обратной стороны, так можно с низу в язычку приварить пятак, а с обратной стороны проверить отверстие для толкания этого пятака(защёлки) можно использовать штырь, гвоздь и тд.
those are some of the worst welds I have ever seen
E, това последното, с лагера заварен за лопатата, направо изби рибата...!
Защіпка працює тільки в 1 сторону,а назад тоді як?)
Автору срочно вручить "Орден Святого Полуляха" !
Por qué se gastan haciendo éstas pavadas.!?
15:00 . . Bend the end of that very cheap and nasty spanner!
good ideas but a very brutal worker
Why is that?
@@MrTechnic you weld directly steel to a bearing and tongs and precision is also not yours. but your ideas are good.
6:50 👏👏👏👏
Really annoying music which detracts from the video. Such a shame!
Co bán ko anh oi
the idea 1 is frankly bad and it won 't last that long + only under 1 diameter , which makes no sense 2 is too expensive relative to analogues from the store 3 uses constantly 4 only in rainy places where plants have a small root system 5 there are cheaper analogues from the store 5 damage to a cheap tool is no more than 6 option normal , but from quickly the cut needs to be done , what needs to be cut here will not work out because of the thickness of the metal 7 the idea is successful , but it is made because of the gear very expensive to the problems of the idea that it will not work if the bolt is really sour 8 the idea is not applicable to shovels of small cubes because coal or other heavy loose muck is not tolerated in such conditions with the right level floor .
Додивився до моменту де приварили металевий прут до підшипника. Висновок - дивитися далі не буду.
Such awful monotonous musak, thank goodness for the mute button
какой из тебя диайвайщик если ты варишь подшипник сварщик невпизд?
У меня только один вопрос где ты находишь это жравое говно? О остольном я даже молчу
👍👍👍👍👍👍👋👋👋👋👋👍👍👍👍
Док дью где ты?
woow
Ппц. Столько вопросов, но самый главный нафига
The rods could have been bent just as easy in your vice that was holding your tool that you made. Duh
Yeah then you would have to tighten and loosen your vice every single time as well as make sure that your mark is perfect every time before tightening device.
There's a reason why they make benders, if you need to pump out a bunch of these twisting your vice a million times is a big waste of time and energy
learn to weld before put this on u tube
Thrs
10:57
😁
сюда нужен доктор дью
@Доктор приди сюда
Научись варить. Ни фаски, ни режима, ни направления электрода, ни совместимость свариваемых сталей. Не зачищены свариваемые поверхности. Я уже молчу про сварку точками куда рука упадет. Чел даже не знает минимума для работы. Зато толпа гавно хавает, многие любят потупить не включая мозги. А каналы с профессионалами сварщиками набирают мало просмотров, нужно же вникать и понимать, а это так "трудно".
Welcome
prutsbear