Faux Black Wood Planks In A Garage Giving It A Complete Transformation Coated Using Concrete Overlay
Вставка
- Опубліковано 16 жов 2024
- Watch how we transformed this garage using our Hardwood Floor Kits. Create a stunning hardwood look with this kit! Our kits can be installed in interior and exterior spaces. It’s an industrial grade product and an extremely DIY friendly process! Watch the whole process from start to finish!
Recap of what you’ll find in this video 👇
Texture Coat: 1:19
Sanding: 3:41
Scratch Coat: 4:48
Taping: 6:11
Gray Texture Coat: 7:31
Black Stain: 9:03
Sanding: 9:46
Pulling Tape: 10:48
WB Urethane Top Coat: 12:42
Final Look: 14:40
You can order your Hardwood Overlay kit here: leggari.com/fl...
When you purchase a kit! 👇
Once your order is placed you receive exclusive step by step tutorials sent to your email. These tutorials will walk you through the entire process. Beginning to end, we’re with you every step of the way. Showing you exactly what to do, how to mix and apply products. If you have further questions you can always email us at customerservice@leggari.com
Product Details:
Leggari Hardwood Overlay kits are show stoppers every time! You’ll have all the materials you’ll need to complete an industrial-Grade Concrete Overlay Hardwood technique that will never wear off. It’s thin so it won’t complicate door thresholds or create tripping hazards. It will follow the contours of your concrete so there’s no need to make the floor perfect before installing. It can also go vertical. No more grout to clean! Imagine beautiful hardwood in your garage, or around a pool!
Choose between 4mm (about 1/8″) tape, or for more accentuated lines, 6mm (about 1/4″) tape. The tape size you choose will determine the width of the gap between each wood plank you make; these can also be called ‘grout lines’, although they’re not filled with grout. The color and look of the grout lines between each wood plank will be the look of the concrete you’re going over. Each Hardwood Overlay Kit comes with enough tape to do 4″-12″ wide wood planks (or larger). The larger your planks the less tape you’ll use.
These floors are incredibly durable and mimic traditional Hardwood floors. Leggari’s Hardwood Overlay System is cost-effective and easy to install. They are 100% UV stable and can be installed inside or out. Now you can put hardwood in your garage to park on, or even around your pool! Our Hardwood Overlay Kits go right over your existing interior or exterior concrete. They’re easy to install and easy to maintain.
This kit includes Concrete Overlay, Liquid Polymer, Stain, Grout Line Tape, and a Top Coat. This kit does not allow for different colored grout lines in between the wood planks, the grout lines with be the color of your concrete
About Us:
Leggari is a coating based channel (metallic epoxy & concrete overlay) that will show you how you can use our products as amazing DIY projects to transform your existing surfaces! You can renovate things like kitchens, bathrooms, basements, patios & more! With Leggari you can renovate in no time, imitating real stone or creating a designer concrete look!
You can watch hundreds of videos that show you the step by step process of resurfacing your existing surfaces!
- Tim Krumland and Tylor Svangren, Leggari Founders
#leggari #epoxyfloor #epoxyflooring
FIND US ON SOCIAL MEDIA
Our Social Media is filled with projects done by customers around the world and we also give sneak peeks of projects we're working on, stay up to date and follow us!
Instagram: / leggari
Facebook: / leggari
Pinterest: / leggari
Twitter: / leggari
It looks amazing! For all the critics out there, you get what you pay for.
Excellent work
Easily 10k job. Looks freakin fantastic 👌
BEautiful floors they turned out to be .
This was nothing short of spectacular....WOW. I'm 100% sold for when it comes time to refinish our garage floor. I'm hoping you guys have a solution for pool decks (concrete), as well.
Once the seal is applied. Is it slippery? And how long does last?
No, there’s plenty of texture on that floor, that the sealer won’t diminish the traction qualities of the floor.
I would love to learn more about the process of how to do that. Here getting ready to retire from Boeing and looking at doing something I would enjoy and this looks like s skill that I can use and take anywhere I go and do for people up here in the Northwest. love the outcome and the way it looks.
You can learn the general process here on UA-cam from this channel
Great works
Thanks!
How does the tape leave such crisp lines without the product chipping off as the tape is being removed?
I was wondering the same thing
Love the videos I have seen, this faux wood looks great, looks like a great idea for my house that needs re-tiling. Would prefer it being done dark brown and in larger sizes
How does it feel to walk on it? And what was the cost and how long did it take to complete this protect?
Nicest garage floor I have ever seen
😍Really love the after look of the black wood flooring. 👍Awesome job!
I've got a 50x80 warehouse I'm looking to turn into a music venue/lounge and I know for sure I want to have at least part of the flooring done just like this 🤘
Respect the amount of work in this, absolutely crazy. I'll stick to my metallic blue :P
Thank You!
SICK!
Thanks!🔥
Where can I get one of those pool trowels with the handle attachments? Awesome job!
Any concrete specialty tool store should have them!
Really love this amazing workmanship .
Wow what an amazing video. I love it so much. I wish you didn't had to speed the video because I love watching every thing. I don't like missing something. Now I was trying to figured out how you saw the tape and how it's going to come out. Anyway you are awesome. I can't wait to get my sample kit that I order. I still didn't get any message back on my email. Oh yeah I wish you would tell us step by step on how to do this because I was OMG what too use next and what to do.
after about 55 garage floor videos from YT hell
this finally hit the spot
It's about time😂
Awesome
Thank you!
That looks sick!
That is a awesome job well done guys and girls
Hi, is this waterproof?
How does this compare to epoxy?
Have a basement concrete floor I'd love this on, would hate water to damage it.
Very very durable and handles water great paired with our sealer or urethane top coat!
Do you have a video that explains what products you're using for each step?
We have several videos showing how to install this system but if you want to see the products, check this out! 👉leggari.com/order-flooring/#hardwood-overlay-kits
Amazing love this ... have you a wooden brown version ... looks great
Yes we do check out our woodgrain overlay kits at leggari.com!
Guys it beautiful but wish I knew what you were adding (what product) as you got there. But it beautiful!
That looks amazing!
How can i be trained to do epoxy here in Los Angeles, i currently install and refinish hardwood floors, but i want to get into this
I have this kit for 1500 sq ft being delivered as we speak to Boston - any idea how long the pool float and how long the squeegee are ?
It looks amazing but i dont see it being cheapear that tile that i can do myself.. What are the price ranges
Tile in a garage? Umm ok
I am a diy chick that will be building my own home in the near future would love to do these myself but I see so many hands on deck and that is honestly scary ….question do you guys travel out of country and do these works for customers? Like down island St Maarten ?
Awesome,can it apply on a wall
I really love leggari videos. Your Products are amazing, though haven't ordered anything yet but I will. I wish you would put up more graphics step-by-step information. Ie, primer , let dry, sand, primer again. The over voice overs are good but it's almost impossible to get everything. What would you recommend as a better way for me to understand because I'm prepared to do this in my entire house.
All of our videos have very long step by step tutorials that go with each system we sell. Although these videos aren’t on UA-cam we make sure you have them before starting a project.
@@LeggariProducts 👎👎 for not including details in the UA-cam videos.
We’re I can buy the tool that you used to do the texture coat.thanks
This looks awesome. What is the tape width used here?
Hello! Grout width/tape width is up to personal preference. This tape is 6mm wide. Check out our tape size options here! 👉 leggari.com/product/filament-tape-grout-tape/
Espectacular
Is the finished floor smooth or are there grooves where the tape was?
How much would a project like this cost (roughly)?
I’m very interested in doing this to my garage as I am moving into a new home. I saw that it said the grout lines would be the color of the concrete. Does that mean your initial texture coat would not be in the kit I buy?
I noticed that you filled the expansion gaps. Will this crack again in Northern climates? Can this be done on an aged concrete floor with a lot of exposed aggregate and/or cracks from settling. Garage floor is probably 50 years old.
I put epoxy down on my 70 yr old basement concrete. If the cracks are thin, you may want to think about using a diamond blade to make them a bit wider (about the width of an expansion gap) so the epoxy has more surface in the crack to cling to. It should not affect the expansion gaps.
With the wood grain technique is it rough to walk on barefoot or does the floor grinder smooth it out then. I am looking at doing this on my covered patio for sure when I move, and I really like it in that garage setting too. I assume you added the grit into the top coat as well? Thx!
Donde pudiera comprar todas las herramientas y equipos para hacer esos trabajos aquí en la florida
Obtenga todos los productos de Leggari.com, obtenemos todo lo demás de Home Depot
WHERE DO YOU GET THE POLE THAT CLAMPS ON THE POOL TROWEL
What is the difference between between urathane topcoat and polyurethane topcoat interms of applicability on epoxy resin countertops
Bonjour superbe travail j'aimerais savoir le grain que vous passez pour poncer votre epoxy et savoir combien de temps de séchage à chaque passage de votre epoxy et à quelle moment vous enlever les scotchs merci d avance et savoir combien sa coût le m 2 du kit complet
Does the tape have wire on it?
You people never answer questions! The 2 coats of white you put on, was that a paint or a solid stain? I wish you explain exactly what your doing and what products are in the video.
Call customer service at 844-LEGGARI or Email customerservice@leggari.com They will be able to help you with your questions!
What was in the Scotts spray bottle?
What type of filter do you use in the vacuum so you’re not changing it or cleaning it out every five minutes up after grinding
We use a filter and a bag together. Vacuum bags work amazing when combined with the cheesy filters. Thanks
CAN THIS BE DONE ON DRYWALLS?
Can this product be used over tiles?
How can I get into this business, I will love to do this in Africa.
what type of sandpaper did they use and what measurements
How do I find a certified installer in my area?
I really wanna do this to my garage. But hard to find anyone that does this kind of work in Hawaii.
Where did you get that garage door? I want it!!!!
Can this be done over radiant heating
Yes it can good question!
@@LeggariProducts I’m sold then! I’ll be ordering a kit shortly!
I have been subscribed to your channel for well over a year now, I watched them all, And I have also been showing them to my friends and family!! I want to use your product to put flooring down in my living Room, which used to be a carport, attached to another room when you walked in, but I've torn down temporary walls and opened it up into a 20'x 20' great room. The only problem is that there is a crack all the way across the room where the two different concrete pours for each room do not exactly match up, with one being ever so slightly higher than the other. So, I have to fill in the crack and sand it down where it is at least semi level, until I get the exposure pouted, to help level it out. I will be using Earth tone colors with a oak colored base. Then some Gray and a lighter tan color and maybe just hints of black and maybe white? Because, I know that a poxy levels itself outhow do you suggest I fill in that crack and make it level without it being too difficult? I am 60 years old and disabled. I also have no help! I have been watching your channel long enough to know that you've got a crack filler that you can use, and sand it down. That should be enough, right? And, does that dry hard light concrete to make it difficult to sand? Also, how can I determine how much it would cost me in materials for that Room, Because I am on a fixed income, and I lose half of that income in 4 short years? I'm also going to use it on my bathroom and laundry room counter tops with the marbled look. The counter's or not that big Commerce so it should not cost me too much to cover those.
Let’s talk about your project in more detail, please contact us at customerservice@leggari.com or 1-844-Leggari. Talk soon!
I presume you guys do a moisture test, right. I could definitely see subterranean moisture causing this product to bubble as it does not allow moisture vapor to escape.
Quanto eu gasto de material para uma área de 27metros quadrado?
How does this not leave footrest while you’re walking on it?
The have cleats on, or you can wear spike shoes.👍
So about halfway into the video im like dang this is allot to lay some planks down..... then it dawned on me its no faux wood its faux planks lol....🤯
You guys did good but the wood should be designed so it stacks and the lines match up every other piece
Pro when u don’t get a drop on his black sneakers
Looks great but all those line will fill up with dirt and stuff and be a nightmare in a few yrs. If it could all be level then it would be a ten
😳❤️❤️❤️❤️❤️❤️
I think using thinner tape would give it a better effect of looking like actual wood planks.
Totally agree! The Hardwood Kits in our website come with two thinner tape options than this.
Shit is ridiculous! Can’t wait to do my kitchen.
If you're considering this as a DIY, don't, just don't. This is NOT a DIY if you're expecting great results. You should be experiences with concrete overlays to do this. I learned this the hard way. In short, note how none of the videos discuss basic "how-to" elements such as dry times. If they don't cover things such as dry time, what else are they failing to cover? And no, there are no instructions that come with the supplies they send. I learned a ton about concrete overlays while doing this to my garage, and if I could do it over again I would 100% not use overlay.
I get the same result with using Portland cement and sand😉 cheaper
You should put this video out again and narrate what you are doing
We just launched a 4000 sq ft hard wood kit video, check out this video! ua-cam.com/video/uiX_sQKL2PM/v-deo.html
Make a video where you show what's being used and simple. You clearly have to hire someone for that job in the video
music drives me bonkers
Thanks for watching!
Problem with finishes like this is durability. They don't have it. Basically a coat of paint over aging concrete.
It's sexy and you know it!
Great looking product but, I'm going to be critical for a moment. The grout line that goes up the side of the step looks bad. I would never have installed a real tile like that. I think a grout line along the top of the riser and sides of the step would have been a better look. Leave the whole tread without grout lines. It would give the step more of a tradtional tile "built" look.
Of course, this is just my opinion.
Great product guys.
I guess I'm just not seeing the aesthetic ROI for the labor intensity...but that's just me.
This process has been simplified since this was filmed (about a year ago). Our Hardwood Kits in our sit are one coat, eliminating the first three steps of this video.
@@LeggariProducts So you did away with all that tedious taping lines on the floor?
Nice effect, just not seeing how it’s worth the enormous time and effort.
The Hardwood process has been simplified since this was filmed (about a year ago). Our Hardwood Kits on our sit are now one coat, eliminating the first three steps of this video. We agree with what you said and noticed that ourselves so we changed it. Thanks
@@LeggariProducts You guys are so inspiring, thank you for designing products that are user-friendly.
can you narrate your videos better, as in, explaining what you're doing as you do it. No idea what these liquids and steps you are taking are or are for.
You not explained about your product and proses
I removed my subscriptions. I don’t like watching a video without explanation.
Damn, dude. I watched it and understood it very well. Maybe, you are not of any construction trades. Either way, a homeowner likely won't care about details and those interested in the details understood it just fine.
You guys need some knee pads!
Agreed! Thank you for watching!