Thanx for the video. Been wanting a stock for my PP750. Don't need the folding. But alas being that i am in the U.S. Bob does not offer shipping here & i don't know anyone over there to ship me one. Guess i have to continue searching US for a maker.
Can't you increase to a sub 12 ft'lb with the folding stock? It seems the same as the Brocock Pathfinder which has an over all length of 616mm with a folding stock and is sub 12 ft'lb.
Yes you probably can,,it's fairly easy to do from what I've been told by someone who's done it but the shot count drop is a lot,to be honest it's fine for my use at close range, I've other guns for the higher power,
It was £80 posted,I've contacted the chap through airgun forum and apparently eBay took them down because of the folding stock,I know he sells other stuff,keep an eye here and I'll post a link to another of his items and then you could maybe message him,
@@coomohit I got it from ant.supplies,, think I may have shimmed it with a strip of pellet tin lid mind,, www.ant-supplies.uk/scope-ring-mounts/multi-rail-piece-mounts/multi-rail-one-piece-scope-mount.html
That looks pretty decent for a 3D printed piece, being 3D printed might have to watch leaving it out in the sun on a very hot day but who does that anyway? I'm very tempted to get one of these, super easy to up the power on them too if you really want to use as a rifle, interested to see more videos from you.
Have you chronographed the gun? I know uk law states postols are not to wxceed 6 ftlb nit im just curious how close ot os to the legal limit as im interested in buying one
@xMrjamjam mine was just under 6 when I chronograph it,and my p35 just under 12,spot on really,,I know someone who got his pp750 to 10.5 which a few tweaks,not sure what he did though,
Great video. I'm looking at the pp750 as a light weight pigeon gun. Where did you get the reach back mount from. As it looks great on your setup and I know for certain it will work as expected and not foul on any of the other components. Cheers
@axle84 Hi thanks,, I got the mount from ant.supplies on the internet they do one without the accessory clamps too,but I use those for night vision gear,
@@ratrabbitandpestsniper1826 great thanks. I'm surprised I hadn't come across the site before there's loads on there. Had you considered a longer barrel. The barrel inside the shroud is 6 ish inches. There's a guy in Canada that makes a 10 inch barrel for £28. You loose the sound suppression on the shroud but if your putting a decent moderator on I doubt it would matter.
@@axle84 to be honest I only use it for close range,I've other rifles for the longer ranges,,I can't remember if it was that one but I may have had to shim slightly to get a tight fit on the dovetail, I cut two things strips with scissors from a pellet tin lid ,
@@surreallife777 Hi,,,no I don't sell them,I purchased it here in UK,,I believe the seller doesn't ship overseas unfortunately, check the other comments as there is a link to the seller,might be worth an email to ssk.
@e.k I believe the seller is away until new year so that might be why link doesn't work,he has an Instagram page you could maybe message him on, @bobpatto
That looks really nice, changes the gun drastically 👍
Functionality is improved no end too,wish I'd gone for the fixed stock now though,
@@ratrabbitandpestsniper1826 it's so stowable, quick to deploy and collapse 👍
Excellent video mate, glad you like the stock, thank you.
Hi Bob.I have emailed you.Are you still making these stocks please?
Bob is the man
Nice a made one few year bk using mp5 stock worked brilliant
So cool I need it for mine
Thanx for the video. Been wanting a stock for my PP750. Don't need the folding. But alas being that i am in the U.S. Bob does not offer shipping here & i don't know anyone over there to ship me one. Guess i have to continue searching US for a maker.
Could you please tell me where you got the sling attachment from and what it is called? I need it too I think
@Wodan's Wil hi,,it's called M-LOK Keymod sling attachment ebay item number I found for one is 203967603023
looks nice, just got a red dot on mine
Can't you increase to a sub 12 ft'lb with the folding stock? It seems the same as the Brocock Pathfinder which has an over all length of 616mm with a folding stock and is sub 12 ft'lb.
Yes you probably can,,it's fairly easy to do from what I've been told by someone who's done it but the shot count drop is a lot,to be honest it's fine for my use at close range, I've other guns for the higher power,
whats the price on this stock please and your ebay links dont work 😞
It was £80 posted,I've contacted the chap through airgun forum and apparently eBay took them down because of the folding stock,I know he sells other stuff,keep an eye here and I'll post a link to another of his items and then you could maybe message him,
This is the seller,another of his items 115304875550,
Very nice Airgun my friend, elegant design...awasome 👍👍👍🙏🙏🙏
Care to disclose where you got the scope mount.I cant find an offset with 11mm dovetail like that anywhere?
@@coomohit I got it from ant.supplies,, think I may have shimmed it with a strip of pellet tin lid mind,,
www.ant-supplies.uk/scope-ring-mounts/multi-rail-piece-mounts/multi-rail-one-piece-scope-mount.html
@@ratrabbitandpestsniper1826 thankyou Sir
👍👍 Super, sehr gut, verry nice😀
Does it stay locked when folded over? Nice set up.🤠🇺🇸
Hello friend. Can you tell me where you found the foldable pod please? the link you shared doesn't work
@@gbyl.avision7901 www.bobpattenden.com/
@@ratrabbitandpestsniper1826 thanks
That looks pretty decent for a 3D printed piece, being 3D printed might have to watch leaving it out in the sun on a very hot day but who does that anyway? I'm very tempted to get one of these, super easy to up the power on them too if you really want to use as a rifle, interested to see more videos from you.
Great gun,regulated too and very accurate, 👍
Have you chronographed the gun? I know uk law states postols are not to wxceed 6 ftlb nit im just curious how close ot os to the legal limit as im interested in buying one
@xMrjamjam mine was just under 6 when I chronograph it,and my p35 just under 12,spot on really,,I know someone who got his pp750 to 10.5 which a few tweaks,not sure what he did though,
The seller doesn’t ship outside of the UK 😑
Good night friend the customization was a great show congratulations
Friend where did you buy this stock? Do you have the contact of manufacturer ?
Hi,I got it from a UK seller, apparently he doesn't ship abroad if you aren't in the UK,?
Have you tuned it?
@@Westhamskin no its not been messed with,,accurate as hell so no need ,,
Compares to my NOTOS in style and power.
where can i get this stock from please
@Matthew Tom Jones
splund.wixsite.com/mysite/home
Try this
@Matthew Tom Jones or try Bob Pattenden Facebook
www.bobpattenden.com
Onde encontro está peça que você colocou no local da mira?
Is it the scope mount you are asking about?
@@ratrabbitandpestsniper1826 está peça onde fica a alça de mira onde encontro para comprar?
Onde consigo essa coronha amigo
Hi,I got mine off eBay, but I don't think they're available now,and from memory I don't think the seller ships abroad,?
Obrigado meu amigo eu estou a procura de uma dessa
Manda o link para mim da coronha da pp70 porque eu não estou encontrando no app do eBay
To date, the ebay link is no longer working :-(
I believe eBay took them off for folding, he sells on Facebook I think and through the airgun forum,
@@ratrabbitandpestsniper1826any clue for a link please...
facebook.com/bob.pattenden
Great video. I'm looking at the pp750 as a light weight pigeon gun. Where did you get the reach back mount from. As it looks great on your setup and I know for certain it will work as expected and not foul on any of the other components.
Cheers
@axle84 Hi thanks,, I got the mount from
ant.supplies on the internet they do one without the accessory clamps too,but I use those for night vision gear,
@@ratrabbitandpestsniper1826 great thanks. I'm surprised I hadn't come across the site before there's loads on there.
Had you considered a longer barrel. The barrel inside the shroud is 6 ish inches. There's a guy in Canada that makes a 10 inch barrel for £28. You loose the sound suppression on the shroud but if your putting a decent moderator on I doubt it would matter.
@@axle84 to be honest I only use it for close range,I've other rifles for the longer ranges,,I can't remember if it was that one but I may have had to shim slightly to get a tight fit on the dovetail, I cut two things strips with scissors from a pellet tin lid ,
Where do you buy, this beautiful Gunstock;
I'm in Vancouver Canada do you sell these?
@@surreallife777 Hi,,,no I don't sell them,I purchased it here in UK,,I believe the seller doesn't ship overseas unfortunately, check the other comments as there is a link to the seller,might be worth an email to ssk.
@@ratrabbitandpestsniper1826 thank you
How can i find this folding stock anyone know where to purchase from cant find on ebay...
He no longer can sell on ebay, if you are in UK I think he still sells on airgun forum,
www.bobpattenden.com
We looked everywhere.
Looks like this page is missing.
🤔🤔🤔
@e.k splund.wixsite.com/mysite/home
Try this
@e.k looks like link didn't work but he is in this comment section and found his website for you splund.wixsite.com/mysite/home
@e.k I believe the seller is away until new year so that might be why link doesn't work,he has an Instagram page you could maybe message him on, @bobpatto
www.bobpattenden.com