🎶 Hey Joe, where you going with that detailing brush in your hand!? 🎵 😏 Attention to detail is the key factor here; no shortcuts… excellent video as always: 2 degrees C… utter professional ⛄️
One word for that car gorgeous absolutely gorgeous that was the car that was on my wall when I was growing up and if I’m honest if my wife would let me have a picture in our living room that’s what it would be you can keep your modern day Ferraris that is a classic all day long in fact I can honestly say I’m in love with that car and I don’t know a fella who is watching this who wouldn’t agree with me I could just look at it all day every different angle and admire it’s pure beauty
Oh my Joe! I can't think of a better way to spend my lunch hour, just watching you pamper that Italian supermodel. I did a black Testarossa years ago and I still have bad dreams about how hard it was to perfect, LOL. You did a marvelous job and I'm just eternally grateful for your ability to capture our attention. I love the wood block on the jack reminder and the custom cut pad tip for those finicky side panels. As a doctor I can't help but to suggest you get some tools to save your back. You're young and strong but protect yourself from the wear and tear of bending over so much. Perhaps a low stool for doing wheels or a table with the rolling pins set up so you can do the wheels seated or even standing up. You the man Joe, continued success in all. Cheers!
Another quality video joe I’m a massive auto finesse and meguairs fan got all there products. Can u do a video on there products what u think are good or bad and compare them etc keep up the good videos always looking out for your videos and watch them straight away when uploaded
Thanks Paul! From Auto Finesse I use Crystal Glass Cleaner, Dressle All Purpose Dressing, Lavish Foam, Satin and their clay bars. From Meguiars I use M110 M205 and Endurance Gel. Hope this helps pal. Thank you for watching my videos. Means alot!
One owner from new, fuckin hell fair play 👌 love these cars. Fantastic job Joe 🤙 I recently got a twist loop drying towel and will never go back, unbelievable results. New favourite detailing tool.
Hi Joe, what a awesome video,the picture I had was this Ferrari.what a transformation done.the seats Lok totally different with a clean than having a refurb.what a nice looking car.👌
Precision detailing as with all your work. Fantastic to watch a detailer with such passion and care for a vehicle and not the money. Keep up the amazing work and keep the videos coming.
Love your work Joe, this has to be one of the best transformations the indicator lenses look like gem stones. The owner must have been blown away, fantastic.😎
I tend not to purposely leave scents I'm cars. I'm quite lucky I clean nice cars that have natural leather scents or factory scents. Therefore I use a low scented interior cleaner. Hope this helps
Thanks! For me, I cut with Koch Chemie H9 and finish them with Meguiars M205. Basically use the same cutting and finishing polish as you would on paintwork! I hope this helps, Joe
@@JoeHuntley many thanks for this - watched this video a few times now, I have a quite swirly 348TS, and a little prior experience, this video of your technique has been a great guide seeing as they’re the same paint and very similarly put together, gives me the confidence to tackle it 👍🏻
Another brilliant job done great work. I have recently bought big boi power washer I got the 15 mtr lance instead of the 8mtr should I have got the 8 mtr instead or does it not matter cheers Stewart
@@JoeHuntley Hi Joe thank you so much for helping me out with this question I think I will be getting a bottle of ultimate finish shampoo ago brilliant work as usual perfect cheers Stewart
How did you get the black gunk off the plastics. I did a Ferrari 360 Spider and the plastics were the same. Took 6 hours and loads of steam work. Any short cuts?
Brilliant question!.... Yes there is a paint depth gauge you can use on plastic. Typically these depth gauges are ultrasonic and cost £2500 upwards. The standard depth gauge will work on steel and aluminium no problem and it bounces back of the metal. Where as for a composite material like plastic or carbon an ultrasonic one is needed. How do I get a round this? I take measurements from every other paint and eye ball bumpers to see if they have been painted. I guess this comes from experience. I hope this helps!
Hey Spencer thanks for taking the time to watch. For me I wouldn't be waxing over a coating. The wax will clog the coating an reduce the effectivity of the coating. Joe
@@JoeHuntley I’m sorry I misspoke, I meant to say “prefer using wax instead* of a ceramic” but I heard in the video that since it’s not being driven much, it’s not needed. My 348ts has the same single stage paint and definitely takes an experienced person to work on the paint. Loved the video
Now this is what detailing is all about, going that extra mile with the finer things. Well done Joe, always loved the TR
Thanks Brother
Insane amount of work involved Joe old skool waxing on that Ferrari and a tonne of pads used perfect Happy New year Sir 🙌🏻🙌🏻🇬🇧🇬🇧
Cheers ears!
Happy New Year to you too!
🎶 Hey Joe, where you going with that detailing brush in your hand!? 🎵 😏 Attention to detail is the key factor here; no shortcuts… excellent video as always: 2 degrees C… utter professional ⛄️
Thank you so much!
Even the toolbox got a detail… Solid work joe…🤩👍
Thanks dude 😁
One word for that car gorgeous absolutely gorgeous that was the car that was on my wall when I was growing up and if I’m honest if my wife would let me have a picture in our living room that’s what it would be you can keep your modern day Ferraris that is a classic all day long in fact I can honestly say I’m in love with that car and I don’t know a fella who is watching this who wouldn’t agree with me I could just look at it all day every different angle and admire it’s pure beauty
Love this Anthony!!!!
Beautiful work.
Thanks 👍🏻
This was absolutely amazing! The attention to detail was perfect.
Thank you Eric 🙏🏻
Stunner as usual Joe! Keep the awesome videos coming 🙌
Thanks!
A passion for perfection….. what an amazing result
Thank you!
Super satisfying to watch!
Love this (:
You don’t see details to this level every day!
Thank you 👍🏻
Amazing transformation Joe
Thanks Rob 👍🏻
Incredible job! Well done on the amazing result!! 👍✨
Thank you!
Incredible work 😍
Thank you
Oh my Joe! I can't think of a better way to spend my lunch hour, just watching you pamper that Italian supermodel. I did a black Testarossa years ago and I still have bad dreams about how hard it was to perfect, LOL. You did a marvelous job and I'm just eternally grateful for your ability to capture our attention. I love the wood block on the jack reminder and the custom cut pad tip for those finicky side panels. As a doctor I can't help but to suggest you get some tools to save your back. You're young and strong but protect yourself from the wear and tear of bending over so much. Perhaps a low stool for doing wheels or a table with the rolling pins set up so you can do the wheels seated or even standing up. You the man Joe, continued success in all. Cheers!
Thanks so much!
I have been looking to buy a wheelie stool for the unit but just can't find the right one yet!
Another quality video joe I’m a massive auto finesse and meguairs fan got all there products. Can u do a video on there products what u think are good or bad and compare them etc keep up the good videos always looking out for your videos and watch them straight away when uploaded
Thanks Paul! From Auto Finesse I use Crystal Glass Cleaner, Dressle All Purpose Dressing, Lavish Foam, Satin and their clay bars. From Meguiars I use M110 M205 and Endurance Gel.
Hope this helps pal. Thank you for watching my videos. Means alot!
Awesome work Joe , it looks like you really enjoyed this job 👍
Thanks Mark, I sure did!
One owner from new, fuckin hell fair play 👌 love these cars. Fantastic job Joe 🤙 I recently got a twist loop drying towel and will never go back, unbelievable results. New favourite detailing tool.
Thanks Tony
Hi Joe, what a awesome video,the picture I had was this Ferrari.what a transformation done.the seats Lok totally different with a clean than having a refurb.what a nice looking car.👌
Thanks Steven
Precision detailing as with all your work. Fantastic to watch a detailer with such passion and care for a vehicle and not the money. Keep up the amazing work and keep the videos coming.
Thank you Stuart
Another level there Joe, loved the selection of machines and ways in which the results were achieved, especially the indicators with the Festool 😎
Thanks dude
Love your work Joe, this has to be one of the best transformations the indicator lenses look like gem stones. The owner must have been blown away, fantastic.😎
Thank you so much Andrew!
Awesome job Joe! Looks out standing
What did you use derust the brakes and seal them afterwards?
The sound of that engine 🤩
As always, a joy to watch and listen to, Joe! Happy New year to you as well 🥳
Thanks Emma!
Great video Joe! Loved that! Did you use anything on the leather after cleaning?
What is your process for leaving a nice scent in the car?
I tend not to purposely leave scents I'm cars. I'm quite lucky I clean nice cars that have natural leather scents or factory scents. Therefore I use a low scented interior cleaner.
Hope this helps
Great vid! What’s the correct polish for the light lenses and indicators can I ask please?
Thanks! For me, I cut with Koch Chemie H9 and finish them with Meguiars M205.
Basically use the same cutting and finishing polish as you would on paintwork!
I hope this helps,
Joe
@@JoeHuntley many thanks for this - watched this video a few times now, I have a quite swirly 348TS, and a little prior experience, this video of your technique has been a great guide seeing as they’re the same paint and very similarly put together, gives me the confidence to tackle it 👍🏻
Lamborghini Countach was on my bedroom wall when I was a lad....will always have a place in my heart for the Lambo...never been a fan of the TR
Countach was a crazy car. Pain in the back side to detail!
@@JoeHuntley you should try motorcycles, that's my speciality, I don't do cars... 👍👍
@@grenphelps7455 I have been know to do one or two... Always good fun!
Another brilliant job done great work. I have recently bought big boi power washer I got the 15 mtr lance instead of the 8mtr should I have got the 8 mtr instead or does it not matter cheers Stewart
Hi Stewart. Always get the 15M option. I think your brought the right product
@@JoeHuntley Hi Joe thank you so much for helping me out with this question I think I will be getting a bottle of ultimate finish shampoo ago brilliant work as usual perfect cheers Stewart
@@Chrystalll734 pleasure, let me know how you get on with the shampoo. Best bang for buck shampoo!
@@JoeHuntley Hi thanks so much for getting back to me I will let you know how I get on cheers Stewart
How did you get the black gunk off the plastics. I did a Ferrari 360 Spider and the plastics were the same. Took 6 hours and loads of steam work. Any short cuts?
Hi John.
A strong alcohol based product will strip it back now problems!
@@JoeHuntley awe magic Joe. Thank you for that, I’ll remember that for the next time…. Which hopefully isn’t too soon. What a nightmare of a job 😀
Massive fan of your work Joe. Quick question, how do you measure paint on plastic bumpers? Is there a specific gauge for that?
Brilliant question!....
Yes there is a paint depth gauge you can use on plastic. Typically these depth gauges are ultrasonic and cost £2500 upwards. The standard depth gauge will work on steel and aluminium no problem and it bounces back of the metal. Where as for a composite material like plastic or carbon an ultrasonic one is needed.
How do I get a round this? I take measurements from every other paint and eye ball bumpers to see if they have been painted. I guess this comes from experience.
I hope this helps!
@@JoeHuntley thanks for getting back to me. Is there anyone in the UK that stocks these? Not that I'm buying one right now 😂
@@jc7879 Yes! DeFelsko is the brand to buy. Lots of people sell these in the UK. Do a little research into which model suits you best!
Hey Joe, any input on wax over ceramic coating? I have ceramic on my f430. Couldn’t be happier
Hey Spencer thanks for taking the time to watch. For me I wouldn't be waxing over a coating. The wax will clog the coating an reduce the effectivity of the coating.
Joe
@@JoeHuntley I’m sorry I misspoke, I meant to say “prefer using wax instead* of a ceramic” but I heard in the video that since it’s not being driven much, it’s not needed. My 348ts has the same single stage paint and definitely takes an experienced person to work on the paint. Loved the video
@@Spencer_Marks I see! Yes in all honesty I love the crazy beeding and durability you get from a coating but I'm old school and still love wax!
Excellent video. Please tell me this was put on a trailer and not driven home!
Indeed it was, safely delivered home by RCR Cars!
Great job, amazing car…for me it was the original Testarossa not the 512 TR that does it for me but let’s be honest I wouldn’t say no!
It's Ferrari 512TR !!! No Testarossa !!!
😁
Beautiful work