Lets go!!!!! We missed u CP! Cant wait for the flyers again! Damn and all the hot takes on tools! Damn and all the deals you spot! Nice to have u back CP!
Missed you for a while, Thank you for showing these, for this DIY old man, I will never wear these out, heck they will look great in the tool chest and may just sleep forever remaining pristine, who knows I may just need them, be prepared! I greatly respect your opinion and experince, No BS.
Glad to have you back! I've grown to really like Grey Pneumatic swivel sockets. Started out with a set of GW ones and replaced with the GP's as they took a dump. Just couldn't justify the cost of Snap On, Mac, and Matco ones for something I only use maybe once a week.
Another great video! Keep up the great work. Not every wrench twister need premiun prograde tools. Especially if you are mostly doing shadetree mechanic work. Yeah as you grow you can upgrade "WHERE" you need to and WHEN it makes since for you. I have harbor freight tool, old school USA craftsman sockets in buckets and some i dont take to very just to avoib the tears and jeers of fonding dealing with the knukle draing buffoons. The BEST tool in the world is the tool you at the moment you need it. If you have to send extra personnell. It doesn't imatter what it, if you need ita! 13:06 and its not avialablen, then its worthless.
Old Snap On wobbles were pinless hex/pent. I wonder why they changed and the advantages. I have just about every brand and notice the size of pin is what matters. Nothing worst than socket come apart on first impact.
I've seen a few videos about mixpower sockets, the only flaw I've seen is the color will slide or spin over time, I picked up a set anyway, for $30 they are great.
This one time i dated a girl that... nevermind. It can definitely be too tight. Im in the rust belt. Snap on wrenches suck because they fit too tight. Spending 5 minutes dealing with getting a wrench on and off a bolt isnt good for my paycheck.
Talks are Matco is doing away with the pinless design and have come back out with the pin design welded in made by AJ Manufacturing. Reason is the material for the pinless is getting hard to find
Ive pieced together a Snap-on sae 1/2 swivel set for work and purchased grey pneumatic swivel socket set for home use. Garage / estate sales, flea markets, ebay and fb marketplace. Sometimes ya find some really good deals!!
Hello CP & SUNNY WELCOME BACK: Thank you for this video sir. I thought your presentation was spot on. Ah CP, please stop rubbing Viagra into your floppy swivels.I hope that you & SUNNY are doing OK ???? God Bless & stay safe all.TMP from N.J.😢
Really missed you buddy. Hope all is well. Id like your opinion, I think Im going to get the Tekton 3/8" metric 6-24mm universal impact socket set for $230ish bcuz I think no collar, combined with their warranty is worth it. Then I was looking at Blackhawk 1/4" metric universal socket set n 1/2" metric universal socket set bcuz the price looks fair n Blackhawk has been decent for me. What's your opinion. I think the 1/4" 5-15mm is about $70 n the half 8-24mm or 10-24mm was about $109. Any experience with them or have you heard anything about my choices so far.
instagram.com/reel/DE025S5tilv/?igsh=MTZ5cThxYnRzYXpsNA==
Lets go!!!!! We missed u CP! Cant wait for the flyers again! Damn and all the hot takes on tools! Damn and all the deals you spot! Nice to have u back CP!
Good to have you back.
Missed you for a while, Thank you for showing these, for this DIY old man, I will never wear these out, heck they will look great in the tool chest and may just sleep forever remaining pristine, who knows I may just need them, be prepared! I greatly respect your opinion and experince, No BS.
Glad you like them!
Glad to have you back! I've grown to really like Grey Pneumatic swivel sockets. Started out with a set of GW ones and replaced with the GP's as they took a dump. Just couldn't justify the cost of Snap On, Mac, and Matco ones for something I only use maybe once a week.
Welcome back!
I think you’d like the icon 1/2 wobble socket set I can’t speak for the 3/8 set because I have those in the snap on brand
Thanks for the info and always great content. Also just FYI
5 sided = pentagonal
6 sided = hexagonal
8 sided = octagonal
I love leaving comment generators they work everytime!!
He's back !! Call the center for missing and exploited repair technicians, it's official CP is back !!
I have mixpower 1/2 short and long impact, daily use and haven’t had any problem…. Yet…
Good to see you bro. Happy New Year. Thanks for sharing. Keep the content coming. Hope you have an incredible night. Much love and RESPECT
Same to you!
Another great video! Keep up the great work. Not every wrench twister need premiun prograde tools. Especially if you are mostly doing shadetree mechanic work. Yeah as you grow you can upgrade "WHERE" you need to and WHEN it makes since for you. I have harbor freight tool, old school USA craftsman sockets in buckets and some i dont take to very just to avoib the tears and jeers of fonding dealing with the knukle draing buffoons. The BEST tool in the world is the tool you at the moment you need it. If you have to send extra personnell. It doesn't imatter what it, if you need ita! 13:06 and its not avialablen, then its worthless.
They look beefy enough that they won’t come apart right away. Might be tough to get into tight areas though.
Icon aren’t bad I got them from HF 40% off during November. They aren’t my Snap-On swivels but they are good enough for occasional use.
Old Snap On wobbles were pinless hex/pent. I wonder why they changed and the advantages. I have just about every brand and notice the size of pin is what matters. Nothing worst than socket come apart on first impact.
I have the mixi power set they rock!! the 1/4 and the 3/8 sae and metric!!
It's great to see you back CP! For a made in China product they don't look too bad.
I've seen a few videos about mixpower sockets, the only flaw I've seen is the color will slide or spin over time, I picked up a set anyway, for $30 they are great.
Can't beat that deal..pretty sure Cornwell USA 1/4 swivels are collarless , I have the metric set..great to see ya Buddy..🔥
Thanks 👍
Glad to see you brother great video
Much appreciated
Good job cp. Do more videos I respect your option
Thank you, I will
I've had pretty good luck out of the 1/4 set
Nothing is ever too tight 😂😅😊
This one time i dated a girl that... nevermind. It can definitely be too tight. Im in the rust belt. Snap on wrenches suck because they fit too tight. Spending 5 minutes dealing with getting a wrench on and off a bolt isnt good for my paycheck.
I spy the lighted hole puncher 👍🏻
It's my fly catcher
Talks are Matco is doing away with the pinless design and have come back out with the pin design welded in made by AJ Manufacturing. Reason is the material for the pinless is getting hard to find
Ive pieced together a Snap-on sae 1/2 swivel set for work and purchased grey pneumatic swivel socket set for home use. Garage / estate sales, flea markets, ebay and fb marketplace. Sometimes ya find some really good deals!!
Sounds great!
CP in the house. 🇺🇸
I agree I hate to collar for the same reasons
My arkfeld ultra battery went bad within a month.
Good thing I know they have topnotch customer service and will send a new one within 3 days so 🤷
Hello CP & SUNNY WELCOME BACK: Thank you for this video sir. I thought your presentation was spot on. Ah CP, please stop rubbing Viagra into your floppy swivels.I hope that you & SUNNY are doing OK ???? God Bless & stay safe all.TMP from N.J.😢
Thank you kindly
Could use a good 1/4 set like that
I wonder if the cat branded swivels are any good ? @cp I was thinking
Of picking those up
Damn good to see ya!
Love the cordless freedom seed dispenser.
I went out with the old wheel gun slanging some lead and thought about you. Wheel guns are just so awesome!!
"If its floppin you are never going to get it in there" LMAO
@@CPthetooladdict welcome to the dark side.
Oh, I've always been here. I want the new jm 9mm revo
CP you should try the Proto universal impacts
Same as the macs mine are just older the new ones are macs
I’d like to get a nice set of swivel sockets. Been thinking about getting those new USA matco ones.
Go for it!
Really missed you buddy. Hope all is well. Id like your opinion, I think Im going to get the Tekton 3/8" metric 6-24mm universal impact socket set for $230ish bcuz I think no collar, combined with their warranty is worth it. Then I was looking at Blackhawk 1/4" metric universal socket set n 1/2" metric universal socket set bcuz the price looks fair n Blackhawk has been decent for me. What's your opinion. I think the 1/4" 5-15mm is about $70 n the half 8-24mm or 10-24mm was about $109. Any experience with them or have you heard anything about my choices so far.
Keep the videos coming. CP
Once a week for a while until Feb then I'm dropping 30 days of content
Great video CP 👍
Cp back sweet
Jesus Christ I have missed your content lol no ho-mo
I miss you also pumpkin lol 💕
@ 😂😂😂
😊
Well see when trump off shores the rest of the jobs and raises all prices lol
CP are you doing the UA-cam channel membership or Patreon?
guns are bad 3 round stack extensions are also evil bad bad...
Wooooooooo!!!!!
I hate the matco / gearwrench swivel sockets!! Absolutely garbage!! 🗑 🚮