Dude.... everything you sayd is spot on my problem. I appreciate you, I'm going to get those ballast changed because it happens on both my headlights. They are really bright then start to dim slowly and then either the left or right it stops working, I then have to turn off the headlights and turn them back on constantly on my way to and from work. Thank you for this tip.🙏
@@DavidC-o2w they ere on the headlights you see it once you take them off. I had to take off the bumper and take off the wheels to take off the screws on the wheel covers to get the headlights off. Then you have to unscrew the ballast it's a small box looking thing with a wire with a plug for your OEM bulbs..best get both of the ballast right and left because if one is going out the other isn't far behind. The worst part wasn't taking off everything I just sayd it's getting in the plug of the ballast in the headlight hole itself you have to loosen up the motor thats on your headlights, its adjustable moves the frame of your headlights up and down, thats what makes your lights move side to side when you turn.The hole of the bulb is very narrow for the plug of the ballast wire. It was a pain because you have to adjust the headlight motor down and up for the interior part of the headlight to move to give room for the headlight bulb that's now connected to the plug on the ballast wire, barely fits, then once you connect the bulb in the inside of the actual headlight you have to readjust it to be at the correct setting for the headlight beam to be at the correct height and straight. Luckily for me my brother in law works in a body shop so he knew what to do for that part of the job.😒
Straight to the point and alwais giving extra tips to diagnose , nice ty, now i can go switch the ballast from letf to right knowing that is a way to diagnose :D
I have AF X35 and I have a bad issue but what you said and makes sense. My bottom new balance online and I'll tell you how the outcome is. Thank you, brother
My low beams only work when key is turned to auxiliary. As soon as you turn car on the low beams give a quick flicker and don’t come on. High beams work fine. Could ballists in both sides be bad at same time? Thanks!
I have a ballast controle module .. on the volvo v50 can the controle module also be the problem?.. The systems you discribe to match my problem .. one side has more problems woth turning of than the other but its sounds just like my problem and when the cat is of and back on they work just fine for a while then the problem returns
Thank you so much. I replaced H11 on both sides when I turned on that only on for 20 seconds, and them they turned off. Do you think it is the ballast ballast? Rely and fuses are good.
need help with my g37 brought bulbs and did everything went to connect it only my turn signal flashes the other lights dont turn on what could the issue be bad ballasts, fuse ???
I have a question but I just noticed reading the comments you don't answer questions 😞Hello sir Thanks for your video I have a question I have a 2016 Kia K900 low beams are HID and are very weak basically you cannot see at night with a low beam when I turn my fog lights on I can see a lot more so I replaced my HID light bulbs no change lighting is still the same emitting basically no light except when you look at the front of the car you can see that the lights are on so my question is do you think it's the ballast? I did purchase two used ballast that said they were working and tested but of course I have to remove the bumper so just wondering if it's the ballast. Before I go to the expense of replacing them.
So I have had headlight issues on my F30. The passenger headlight used to work pretty reliably. Then on start up the passenger side would reliably start up after the driver side. Then recently it wouldn’t turn on the past 2 days, but sometimes at the end of my commute it would turn on. I replaced the bulb and ordered a ballast. Could be wiring/connections/ballasts on my end.. does that sound right?
What causes the dashboard to say check right and lift headlamps after going from factory headlamps to led never had this problem before all I did was took the factory headlamps out and replaced them with new led headlight because led are brighter than the factory ones that was on my 2007 ford fusion now my dash cluster is saying check right and lift headlamps what could be the problem ????????????
Hey bro I removed my headlights on a 2005 Toyota Avalon because I bought replacements. They were the wrong ones do I put the old headlights back in and now my driver hid headlight won’t turn on? The high and low beams won’t turn on but the passenger light works? I took it to a shop and they said it’s the ballast I don’t know but I’m about to buy a replacement aftermarket snd fo it myself. Do you think it’s the ballast? Do they just stop working like that? The blinkers still work and the fog lights work. Thanks
My 2013 volkswagen cc driver side headlight works when I start the car on, then a minute later it turns off by itself. I checked for bad connection, but everything looks good. What else could be the problem?
Maybe you can help with my problem? I have a Hyundai i40 2015 with self adjusting beam. At the moment the High beam seams ok but when the low beam activates because of on-comming traffic I can hardly see 4m infront of me. What can this be caused by?
Would a bad ballast cause an error pop up on dash saying daytime running lights not working? I checked them and the do work but I get that message. It’s on a 2010 Audi a6 c6
I have an e46 and ever bulb I put it in turns to a yellow hue after warm up, but during the warm up it shows the right color temperature. Can this be a ballast issue?
Hello, I have a little issue with my motorcycle HID lights. The pass light switch doesn't always works. Sometimes it does sometimes it doesn't. Sometimes it flickers on and off right away. Could this be a ballast problem?
My Philips bulbs when switched on, they reduce in brightness after 1 second. Can I fit a 55watt ballast for 35 watt hid bulb to increase its brightens? Thanks
LED headlights HIGH BEAM blue light on the dash lights up immediately, but High Beam itself lights up with a delay of 1-2 seconds. Is it an issue with ballast or smth else?
Hello, I have a brand new module for my 2015 headlamp I installed last year, water got in and I got the “low right beam” malfunction on the dashboard. The light would stay on after I turned off the car for an extra 15 min before it would turn off. I removed the headlamp and module the following day to try to save it from burning out. There was excess water in the lamp. How do I know if the module is still in good working conditions?
The module had some water in it, but I dried it out and it didn’t show too much corrosion or water damage. I want to make sure the module still works, before I try to fix the lens cover of the head lamp.
How can I be sure which the issue is, Headlight or Ballast? I want to buy the right item. I have a Chev Bolt and I have to take off teh front end tp get to the bulb and ballast, Thanks
The electrode (Green piece) on my HID bulb keeps breaking. Was working for 10mins. Went to auto zone to get windshield wiper fluid. Came out and checked the lights right side bulb did not work at all
So im curious, I buffed and waxed my car all the sudden my passengers headlight wont work. I replaced the fuse but still with a test there is no power getting to the left headlight. Would that be a ballest problem if no power is getting to both 10amp fuses for the left light? All other fuses have power
I'm so confused now, I thought my headlight bulb was bad but now I don't know anymore :( Without opening the vehicle up, how can we tell? My cars lights turn on just like this but it is dim and indeed, after a short while it turns itself off. I'm able to get it to turn back on by flashing my headlights on and off a few times before it turns on again. It is very dim, orange color but still works. I assumed since a light bulb usually dies out completely, that it is a ballast issue rather than the light itself? I don't really see it flicker, just very dim and dull.
Only one of my low beams doesn't work, tried running a wire from side that does work and now both don't. Tried replacing fuses bulbs and relays first then checked wiring for shorts cause fuses had power and bulb didn't. Stumped.
hey man i have a quick question. So recently one night I turned on the low beams to my RSX and I noticed a problem. One worked and showed the normal white color while the other one was a dim orange color. It’s weird because I bought new bulbs and been running them for about 6 months now and no problem until last night. I tried swapping bulbs to see if the color followed but it didn’t. So it can’t be the bulb being blown. And another issue was that when I turn on my high beams my passenger side headlight(which is the side that glows a dim orange) completely shut off. I’ve been looking around for videos and stumbled upon this one. Hope you can reply back so I can maybe get your input on it👍
And one more thing.. I changed the ballast and that was the problem. On the flip side it's a pain to change them. The ballast connection doesn't fit through the headlights you have to manually turn the motor on the deadllights that was the biggest problem and the most difficult of the whole project.
What if my light keeps turning off randomly it doesn’t flicker or dim much but it’ll turn off out of nowhere I replaced the burnt out bulb and put a new one and it’s been like 3 weeks and it’s happening again any idea??
Fantastic video! My car is a 2008/2009 MB E350. I am having an issue with my headlight on the driver side only which goes out after about 30 seconds of idle. However if the headlight is on and I am driving faster than 37MPH then my the headlight stays on, when I drop below it goes out. However I can get it back if I turn it off and on again or switch modes, but same problem happens if I go below 37 again. It seems kind of odd I have to switch modes every time I come to a stop light. If I am in my garage and put the headlight on it is super bright and wide (vertically), and then goes off after 45-60 seconds. I know funny problem, any suggestions or have you seen this before?
It works and it doesn't work. It worked after parking my car in hot sunny day for few hours, it stopped working after parking car aside after sunset for few minutes. I'm beating the shit out of ballast when it doesn't work, switches on 50% of the time. But itsa serious pain.
Dude.... everything you sayd is spot on my problem. I appreciate you, I'm going to get those ballast changed because it happens on both my headlights. They are really bright then start to dim slowly and then either the left or right it stops working, I then have to turn off the headlights and turn them back on constantly on my way to and from work. Thank you for this tip.🙏
Yes but where is that located how much it cost where how ?
@@DavidC-o2w they ere on the headlights you see it once you take them off. I had to take off the bumper and take off the wheels to take off the screws on the wheel covers to get the headlights off. Then you have to unscrew the ballast it's a small box looking thing with a wire with a plug for your OEM bulbs..best get both of the ballast right and left because if one is going out the other isn't far behind. The worst part wasn't taking off everything I just sayd it's getting in the plug of the ballast in the headlight hole itself you have to loosen up the motor thats on your headlights, its adjustable moves the frame of your headlights up and down, thats what makes your lights move side to side when you turn.The hole of the bulb is very narrow for the plug of the ballast wire. It was a pain because you have to adjust the headlight motor down and up for the interior part of the headlight to move to give room for the headlight bulb that's now connected to the plug on the ballast wire, barely fits, then once you connect the bulb in the inside of the actual headlight you have to readjust it to be at the correct setting for the headlight beam to be at the correct height and straight. Luckily for me my brother in law works in a body shop so he knew what to do for that part of the job.😒
@@DavidC-o2w headlight experts is the internet sight. They cost me I think like 180 for both of them.
I had my ballast replaced and the problem is the same. Hope it’s not a wiring or electrical issue
Where did you get your ballast?
Straight to the point and alwais giving extra tips to diagnose , nice ty, now i can go switch the ballast from letf to right knowing that is a way to diagnose :D
I have AF X35 and I have a bad issue but what you said and makes sense. My bottom new balance online and I'll tell you how the outcome is. Thank you, brother
Your amazing. I’ve gone through three HID bulbs trying to figure this out😂 $100 each!!
And the ballasts for my Honda are $534 each. I've had to replace a few of them
Great video!
Straight to the point, super helpful! THANKS!
My low beams only work when key is turned to auxiliary. As soon as you turn car on the low beams give a quick flicker and don’t come on. High beams work fine. Could ballists in both sides be bad at same time? Thanks!
Having the same happen to my car. Did u end up figuring out what your issue was?
Thank you very much, you helped me out with my doubts of dim HID lights
This guy's the best. Solved my problem
I have a ballast controle module .. on the volvo v50 can the controle module also be the problem?..
The systems you discribe to match my problem .. one side has more problems woth turning of than the other but its sounds just like my problem and when the cat is of and back on they work just fine for a while then the problem returns
should I change both ballasts? one HID turns off while I drive, the other one stays working. car is a 2004 Lexus es330
Replace the defective ballast. There is no need to replace both.
Would the ballast cause the bulb blow
I guess better question is is there access to them without popping off the bumper on 2012 spider?
I thank you for this knowledge. Acura quoted me $855 for the labor for this and two headlights
Thank you so much.
I replaced H11 on both sides when I turned on that only on for 20 seconds, and them they turned off.
Do you think it is the ballast ballast?
Rely and fuses are good.
My 2011 Lincoln MKT driver side will work fine for a while then it shuts off. So I'm going to change the ballast. Thanks for this video.
need help with my g37 brought bulbs and did everything went to connect it only my turn signal flashes the other lights dont turn on what could the issue be bad ballasts, fuse ???
Thank you for uploading this information! It's very helpful!
Thanks brother
Do both lights need to have the ballast replaced?
I have a question but I just noticed reading the comments you don't answer questions 😞Hello sir Thanks for your video I have a question I have a 2016 Kia K900 low beams are HID and are very weak basically you cannot see at night with a low beam when I turn my fog lights on I can see a lot more so I replaced my HID light bulbs no change lighting is still the same emitting basically no light except when you look at the front of the car you can see that the lights are on so my question is do you think it's the ballast?
I did purchase two used ballast that said they were working and tested but of course I have to remove the bumper so just wondering if it's the ballast. Before I go to the expense of replacing them.
What are some good recommendations for the ballasts?
I have a 22 Colorado 😅
Excellent! Well Done! 🥰
So I have had headlight issues on my F30. The passenger headlight used to work pretty reliably. Then on start up the passenger side would reliably start up after the driver side. Then recently it wouldn’t turn on the past 2 days, but sometimes at the end of my commute it would turn on. I replaced the bulb and ordered a ballast. Could be wiring/connections/ballasts on my end.. does that sound right?
What causes the dashboard to say check right and lift headlamps after going from factory headlamps to led never had this problem before all I did was took the factory headlamps out and replaced them with new led headlight because led are brighter than the factory ones that was on my 2007 ford fusion now my dash cluster is saying check right and lift headlamps what could be the problem ????????????
Hey bro I removed my headlights on a 2005 Toyota Avalon because I bought replacements. They were the wrong ones do I put the old headlights back in and now my driver hid headlight won’t turn on? The high and low beams won’t turn on but the passenger light works? I took it to a shop and they said it’s the ballast I don’t know but I’m about to buy a replacement aftermarket snd fo it myself. Do you think it’s the ballast? Do they just stop working like that? The blinkers still work and the fog lights work. Thanks
Most likely a connection issue
@@Top5AutoRepairs yeah that’s what I was thinking too. The connections are all tight though. Fuck man this is bullshit. Thanks for responding though
My 2013 volkswagen cc driver side headlight works when I start the car on, then a minute later it turns off by itself.
I checked for bad connection, but everything looks good. What else could be the problem?
Maybe you can help with my problem? I have a Hyundai i40 2015 with self adjusting beam. At the moment the High beam seams ok but when the low beam activates because of on-comming traffic I can hardly see 4m infront of me. What can this be caused by?
Would a bad ballast cause an error pop up on dash saying daytime running lights not working? I checked them and the do work but I get that message. It’s on a 2010 Audi a6 c6
I have an e46 and ever bulb I put it in turns to a yellow hue after warm up, but during the warm up it shows the right color temperature. Can this be a ballast issue?
So a ballast is only for hid. Because i dont have hid but i got the symptoms your explaining
Hello, I have a little issue with my motorcycle HID lights. The pass light switch doesn't always works. Sometimes it does sometimes it doesn't. Sometimes it flickers on and off right away.
Could this be a ballast problem?
I've been looking where is the ballast located? Please
My Philips bulbs when switched on, they reduce in brightness after 1 second.
Can I fit a 55watt ballast for 35 watt hid bulb to increase its brightens? Thanks
Excellent video brother, great knowledge!
Great Video, I just got a new Ballast for my VW , While driving the lights work well, then one light goes off, Do you know what could be the problem
Thanks for the vid bro👍🏼
LED headlights HIGH BEAM blue light on the dash lights up immediately, but High Beam itself lights up with a delay of 1-2 seconds. Is it an issue with ballast or smth else?
Hello,
I have a brand new module for my 2015 headlamp I installed last year, water got in and I got the “low right beam” malfunction on the dashboard. The light would stay on after I turned off the car for an extra 15 min before it would turn off. I removed the headlamp and module the following day to try to save it from burning out. There was excess water in the lamp. How do I know if the module is still in good working conditions?
The module had some water in it, but I dried it out and it didn’t show too much corrosion or water damage. I want to make sure the module still works, before I try to fix the lens cover of the head lamp.
Does this work if I change the bulbs to led or will I need new ballasts?
I watched a video saying you can install led without ballast.
How can I be sure which the issue is, Headlight or Ballast? I want to buy the right item.
I have a Chev Bolt and I have to take off teh front end tp get to the bulb and ballast, Thanks
If the bulb looks good then it's probably the ballast. I had the same issue but my light was also broken
@@Two31 what will tell me if the headlight is good or bad ? Other than just not working?
Is this the same as Sub To property?
The electrode (Green piece) on my HID bulb keeps breaking. Was working for 10mins. Went to auto zone to get windshield wiper fluid. Came out and checked the lights right side bulb did not work at all
Hi I have Audi q5 every night while driving my high and low beam goes off just like that I turn on it does work 4 or 5 it goes on back
good video- now I know what I mist do
❤❤❤❤❤ awesome video sir
So im curious, I buffed and waxed my car all the sudden my passengers headlight wont work. I replaced the fuse but still with a test there is no power getting to the left headlight. Would that be a ballest problem if no power is getting to both 10amp fuses for the left light? All other fuses have power
Did you ever figure it out? I’ve got the same problem
I'm so confused now, I thought my headlight bulb was bad but now I don't know anymore :(
Without opening the vehicle up, how can we tell? My cars lights turn on just like this but it is dim and indeed, after a short while it turns itself off. I'm able to get it to turn back on by flashing my headlights on and off a few times before it turns on again. It is very dim, orange color but still works. I assumed since a light bulb usually dies out completely, that it is a ballast issue rather than the light itself? I don't really see it flicker, just very dim and dull.
Only one of my low beams doesn't work, tried running a wire from side that does work and now both don't. Tried replacing fuses bulbs and relays first then checked wiring for shorts cause fuses had power and bulb didn't. Stumped.
this guys the best
THANK YOU BROTHER
hey man i have a quick question. So recently one night I turned on the low beams to my RSX and I noticed a problem. One worked and showed the normal white color while the other one was a dim orange color. It’s weird because I bought new bulbs and been running them for about 6 months now and no problem until last night. I tried swapping bulbs to see if the color followed but it didn’t. So it can’t be the bulb being blown. And another issue was that when I turn on my high beams my passenger side headlight(which is the side that glows a dim orange) completely shut off. I’ve been looking around for videos and stumbled upon this one. Hope you can reply back so I can maybe get your input on it👍
bro did u find the answer, this is happening to me as well
Great info thanks 👍
Forgot to mention, the headlights also Flicker some times between High and Low beam.
Ballast, junction box and switch seemed to have similar symptoms.
And one more thing.. I changed the ballast and that was the problem. On the flip side it's a pain to change them. The ballast connection doesn't fit through the headlights you have to manually turn the motor on the deadllights that was the biggest problem and the most difficult of the whole project.
What if my light keeps turning off randomly it doesn’t flicker or dim much but it’ll turn off out of nowhere I replaced the burnt out bulb and put a new one and it’s been like 3 weeks and it’s happening again any idea??
Probably a bad ballast
Thank you
Ok so I have a Jetta and my whole headlight went out also my fog light and rear taillight but it’s only on my right side
Really helpful
Fantastic video! My car is a 2008/2009 MB E350. I am having an issue with my headlight on the driver side only which goes out after about 30 seconds of idle. However if the headlight is on and I am driving faster than 37MPH then my the headlight stays on, when I drop below it goes out. However I can get it back if I turn it off and on again or switch modes, but same problem happens if I go below 37 again. It seems kind of odd I have to switch modes every time I come to a stop light. If I am in my garage and put the headlight on it is super bright and wide (vertically), and then goes off after 45-60 seconds. I know funny problem, any suggestions or have you seen this before?
Thank you very much
On my 2009 Lexus passenger side headlight keeps going on and off
Some say it’s light bulb but you say it’s ballast
Mine kinda turns off and on really randomly :(
Mine flashes 3 times and turns off, 2014 VW GLI
Are you a certified mechanic?
ASE certified and two year Automotive program.
@@Top5AutoRepairs I just had a flickering headlight and it was the bulb,, not the ballast.
This shows ballast failing but doesn’t tell how to check if ballast is bad !
Notice how he doesn't say where the ballast is? Sounds like he doesn't know, lol.
It works and it doesn't work. It worked after parking my car in hot sunny day for few hours, it stopped working after parking car aside after sunset for few minutes. I'm beating the shit out of ballast when it doesn't work, switches on 50% of the time. But itsa serious pain.
Smh what ballast even look like😂😂
You're talking too much you don't show anything