Це відео не доступне.
Перепрошуємо.
The $10,000 Circular Saw
Вставка
- Опубліковано 4 гру 2020
- Check out all of the tools Gaston sells here: piranhatools.c...
Stealth Mount GIveaway (NZ only)
Comment your Instagram name, what tool brand you want mounts for (Festool, Hikoki, Makita, Milwaukee and Dewalt)
And answer the question "What should you use with a chisel? a hammer or a mallet?"
Music by Joe Bae / joebaemusic
I'M ON INSTAGRAM www.instagram....
You can support SBC on Patreon www.patreon.co...
The below are affiliate links. I get a small percentage when you buy using these links. It does not cost you anything extra, but helps supports the channel. Thanks!
My Tools
Tool belt amzn.to/3dXMZnk
Tool belt shoulder straps amzn.to/3AI0VLU
Hammer with wooden handle amzn.to/3jRhQ92
Rubber grip for hammer amzn.to/3jTM7UE
Speed Square amzn.to/3yAaE5f
Makita Circular Saw amzn.to/3qYzaKH
Track Saw amzn.to/3dV9wkF
Awesome ratchet clamp amzn.to/3dSGa6s
Impact driver (main drill) amzn.to/3xDmBat
Other drill for pilot holes amzn.to/3yAYjh4
My Table Saw amzn.to/2UzuOxp
My favourite vacuum (newer version) amzn.to/3yxss0S
Full face mask amzn.to/3hH4Cce
Ear muffs amzn.to/3yNAWBl
Green line laser level amzn.to/3yqYdJ0
The Camera Gear I use
Main Camera amzn.to/3AD2if5
Backup Camera amzn.to/3jTGTbv
Main Lens (main camera) amzn.to/3wp0hzU
Lens for Backup Camera amzn.to/3jWaFfU
Microphone amzn.to/36pNWAA
Tripod amzn.to/3yxSeCb
Headphones amzn.to/3xqm2R4
Drone amzn.to/3xp9OrO
Aeropress (Coffee) amzn.to/3ijpvdQ
Donate here if you would like to help the channel
www.paypal.com...
SEND STUFF TO HERE
PO BOX 3506
Richmond 7050
New Zealand
Disclaimer:
These videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Scott Brown Carpentry Ltd does not take any responsibility for any action taken as a result of the information or advice on this UA-cam channel and shall not have any liability in respect of any injury or damage that may result.
To view full disclaimer, click here: www.scottbrown...
What do you think of the beam saw? what a beast!
Stealth Mount GIveaway: (NZ Only)
Comment your Instagram name, what tool brand you want mounts for (Festool, Hikoki, Makita, Milwaukee or Dewalt)
And answer the question "What should you use with a chisel? a hammer or a mallet?"
Good luck!
Incredible!!! I can only imagine getting my hands on one, one day... maybe someone will hire one out?! Haha Hirepool...
Milwaukee mounts would be a dream 😉
@Northmen_construction
@default_nz , the DeWalt mounts would be great for an upcoming van fitout. I promise I’ll only whack my chisel with a mallet.
Thanks ,my tools are Makita and i would use a mallet .
#buildingdreams
Wheres my trusty brand OZITO?
@lanes_transformation - always a Mallet!! DeWalt please bro, will look great in the workshop! :)
Meanwhile, the drummer guy in his container is shooting his video saying "if you hear something that sounds like a jumbo jet, it's just this carpenter dude with his mammoth saw" 😂
Ahahahaahah
hahahhahahahha
Lame
@Schwalbe262
Umm, I'd say don't get on his bad side. 🤣
😂
Whenever a New Zealand politician gets "gifted" a donation, they should mark their next speech as an "advertisement"
Shouldent all politicians be marked then ?:)
@@robertjonsson5518 They should have to wear NASCAR style suits.
We could use that in America as well
I am not even from NZ and I approve of this message. The same thing should apply everywhere including the US.
Here in America, the joke is we should require the politicians wear sponsor logos on their suites just like the NASCAR drivers do.
Im from Australia, but I'm an electrician and the best and only chisel is a flat head screw driver being bashed with a set of pliers 🤣
my people
A pair of Klein side cutters and a big azzz screwdriver will damn near fix anything
Without seeing you said you were an electrician, I was going to say "typical sparky talk" 🤣
Lmao yep. The big flat head is our chisel. We call it our “beater”
Hey sparky, I like your style!!!!🤪🤪🤪
But we learned to use the screwdriver to cut holes in trunk line for heating and cooling!!!
Meanwhile in Australia, Paul Hogan is walking up to someone on a job site with that Mafell beam saw and saying, "That's not a saw..."
Touché! haahahahaha..
Needs garlic!
This comment is so underrated 🤣
Mafell? I heard Mo-Fo saw..
Had to be said :-)
Gaston is such a character, what a personality. He's really all you want in a salesman, just a genuine dude. Comedic timing is impeccable and subtle, too.
Would definantely welcome him to my site anytime haha 🤝
Gaston is like the Snap-on truck for carpenters.
Gaston videos remind me of a the hardware-store story that ends “I didn’t need any, but he was so enthusiastic and knowledgeable, I wish I did.” Thanks for the video!
And I was just thinking the other day "I hope Gaston is ok, haven't seen him in a while"
Gaston's visits are always a highlight, great video
Loved Gaston's, "If you wanna have all the shavings in your face, you can do that." Lmao!
Your friend Gaston gives the impression that he has his tools business purely as a way of maintaining his hobby for tools and new tool tech. Which is excellent.
The Name Mafell means „Maschinenfabrik Fellbach“ in south Germany. All tools of them are great!
I work everyday withe Mafell tolls, they are the beste for timber framing
I'm in a Realatioship with Erika😍
except for the drills, we had two new ones on a construction site and they both broke within three weeks
@@MrMEINNAMEISTMENSCH the drills are made by metabo
Love it when Gaston is on.
The casting director for this channel has done a top job since episode #1. Kameron, Gaston, etc etc.
The lot of them! Scott, Paerau, Kameron, Gaston, Richard , All legends in my books!
Don't forget the occasionals too - Sayeed, Gillies, the two plumbers whose names I can't remember...
I've got a 16" Makita that I've had for over 20 years. I only use it 3 or 4 times a year but it is handy when needed.
Shout out to that drummer that’s thoughtful as. Hires a storage room just to go practise drums. What a legend mate
I agree
Mafell is etter than festool on making saws.
In german carpentry this is the top brand.
Greetings from Germany.
To get mafell in Australia is a pain and a half. Thou I would love the ability to purchase mafell.
@@daispatrick no idea what you saying but thank you bro
Mafell tools are great, but the price... You need a good stable carpentry business to be able to justify a purchase like that.
In Germany the price is currently 4598.50€ and with guide rail 5057, 60€
@@evgeniydeus8137 I know a lot of carpentry business that only get Mafell saws. They are the best saws you‘ll ever get your hands on.
For the pricepoint they sell here, it‘s honestly rather easy to justify that purchase as a carpenter, if you handle big diameter logs regularily
Gaston's tagline; 'When it comes to hand tools, if I don't have it, you don't need it.'
I'm a Journeymen Cabinet Maker out here in Canada. I will never need that saw ever, but I really want it lol
See if you can luck into an old 40's or 50's Porter Cable K10 or K12 beast. I picked one up, sans lower blade gaurd, for $22.50 at auction 😁
The big Makita beam saw is great. Get an old one for 300 bucks. Make sure nothing else is plugged in to the 15 amp circuit.
@@wurclav1 Second on that Makita, I've used one lots for beams they are great and super cheap!
There's a Makita on kijiji right now. 200 bucks. Needs work but worth it.
don't we all
My wife would always ask what’s with you boys and toys, honestly could spend hours trawling through Gaston’s truck
When Gaston walked behind the saw to hold the timber, I was like please don't kickback please don't kickback. Kiddies out there, never stand behind an operational circular saw, especially holding the timber.
I was scrolling through the comments to see if anyone noticed that 👍🏽
yeah terrifying, even standing in front with a saw that size with that much torque... like bruh it'd cut you in half.
Veto pro packs are expensive, but they make life a lot easier. And Wera tools, what can I say... quality.
Gaston, I used to serve you at Blacks in Nelson so glad you get to stock Wera your a true salesman and your passion for quality tools always shines through.
videos with Gaston are always my favourite, it's like christmas every time, I don't get any presents, but watching other people play and show off new toys is always a treat. WIsh there were more videos with Gaston... I think I've watched them all.
His behind the product antics are rather amusing.
What was the light that you can plug different batteries into?
I second this. Couldn't find it on their website
Yes please give us an answer
That other blue light is a Grizzly Light so I just looked up the site & there’s an “edge 20w hybrid worklight” with “coming soon” as the picture. Looked at the description & it says it’s compatible with leading brands power tool battery systems. So that’ll be the one👍🏼
Tim Taylor and Al Borland are at it again! TOOL TIME! (If anyone remembers Home Improvement)
I just love how Passionate this guy is about tools, don't come across tool shops like that very often that just tells you about the tools for what it really is, no bullshit, so you will always go back to him
When Gaston grabbed the timber behind the saw, while you were cutting. I thought about what sort of kickback a saw like that has. I had to close my eyes.
I friggen love when Gaston comes to town
intead of santa claus coming to town Gaston is coming to town
Love that you're not shy to share that the tool you're receiving is an advert, lots of creators try to hide it, you have nothing to hide!!!
Hello Gaston! So good to see your smiling face again. Scott, You should do a little New Year video of your band of characters just sharing a meal and some laughs. We could all use some cheer after 2020.
Mafell is the king of woodworking tools 👍😍
in my shop i use a mallet, my "in the field chisels" have never been hit with a mallet in their life lol
Rewatched all the Gaston videos yesterday, then wake up to this. Happy Sunday 😊
MAKITA! I don't do Instagram, but as for chiseles... I use whatever's handy, hammer, mallet, 2x4, or some elbow grease.
I like that multiplying screwdriver, I think I'll buy one.
"That's not a saw, that's a spoon!" "I see you've played saw-ies spoon-ies before!"
14:54 thx for sacrificing your “container” with all the sawdust to show us that beam saw👍🏻👍🏻
I'm so surprised Scott didn't plug in the mighty festol up to it
I’ve had the Rali 105 in nickel since 2001 and love it, easy depth adjustment and always square to the sole. I gifted one to a friend who is a trimwork contractor several years ago and he loves it also.
The WERA impaktor bits are just the best I have used up to now...
Please set up a piranha tools in Scotland.
You can buy a good ninety percent of the tools that he sells from the timber framing tools uk website m8.
@@garethheathcote4988 thank will check them out
4:54 I love how serious he sounded haha
Been using Stealth mounts for a couple years in UK ,i have boards set up in workshop plus when no site just hang them up for each brand of tool i have .Found all the trades use them saves time .
Like the vids, sorry I can't take part in the give away since I live in Iceland. Always good to see Gaston and the newest and latest in tools 👌💪
Mallet or hammer?
@@alexjames1146 hammer sadly, those few times I use a wood chisel it's just the beating object closest to me.
WERA is quality tools!!!!! 10/10
😍😍😍
Hi I was using this saw in the 1990 in Germany 🇩🇪 they had them connected to the 3 phase electric supply a very powerful machine and light weight I was cutting bevelled up stands for the permitter of a grass pitched roof it did the job easily I was surprised how easy it did the job
I normally use a hammer day to day for rough carpentry. But the correct tool to use is a mallet and I would love to have the Dewalt battery clips please. Keep up the good work Scott
Hi. What brand was the site light?
Thanks in advance!
That was a hikoki or Hitachi
I love the smell of maffell in the morning.
I haven't seen Gaston videos before and I love it. He reminds me of an uncle I have back home. Great tools too! thanks
I have Makita battery clips next to the shelf where I have my chargers. I put uncharged batteries in or behind the chargers, and promote them to the clips as they charge. Love it, makes life easier!
That saw would be perfect for cutting dovetails.
off doves?..
Could be a dove processor or a good tennon saw perhaps?
emu tails
The kick back on the mafell would rip your arm off!
And possibly your head too! We had a contractor killed in the U.K a few years ago, when his 7 1/4" circular saw kicked back and somehow it jumped up and sliced his jugular open......that Mafell would cut you in half!
Yep seems like a bad idea. Just like when putting big bits in your router at some point it becomes dangerous and you're better off using a router table.
I was worried when Gaston stood in the front then at the back while cutting.
That Mafell circular saw is perfect for some "Crocodile Dundee"-like videos with smaller circular saws at a job site.
"Whats that? Thats not a circular saw! This a circular saw..."
I love your videos Scott I am an apprentice from the uk and love watching your videos to learn what other joiners do in other places keep it up man the quality of the videos have improved a lot since I first started watching you 😁😁
Whereabouts in the uk are you m8? I hope that your apprenticeship is with a decent firm.
I use a “mallet” with a Chisel. On the battery mounts I like the Milwaukee.
Is mullet the correct answer jw
@@toonzbrah4316 You could cut your mullet with a chisel ...
10k ? wtf.
I come from Germany and have exactly the same saw, but here it costs “only” 4,000 euros. The Mafell products are awesome for hard and big work.
On his previous tools it was the same massive difference, export, taxes, gst, etc it all goes up alot when u go to the other side of the planet :D
Yeah, that was my thought as well. 10k seems a little excessive compared to the 4000€ over here. But I think it is a matter of import taxes and customs. That's probably why the price increases so steeply.
May I ask you where you use it for? Timberframing? I'm Dutch but i've never seen one being used here.
@@donderjager4770 it can be used for timberframing as well as anywhere where you have to cut beams over 100mm (I think that is the minimum cut depth of that particular saw). For example in large production buildings where the roof construction is made from wood. Or pole frame buildings. Basically any beam that you'd have to cross cut multiple times to go through.
@@mrhortimer1 Yeah I know, I was curious to his specific use. Since in The Netherlands we rarely use those kind of sized beams.
We want Piranha tools in The Netherlands!! Big thanks to Gaston!
4:53 You wanna have at the shavings on you face? You can do that. 😆 🤣 😂 this guy is class
I actually did't know the exchange rate nzd to euro untill this video pretty interesting
10000nz=5000euro
Gaston (or anyone really) shouldn't put his hands behind a circ saw. It can always kick back and guess what it's gonna hit.
I did the two days showcase with Mafell in Germany a few years back going through every product testing and trying them out. Incredible machines! Now work for the UK distributor! You can’t beat Mafell.
Iv had my veto pro tp4 pouch and tech back pack for years now ! They are the best made bag in the business!
And all the US viewers are saying what about us.
Well now you know how giveaways feels to other country users.
Thats a saw you dont want kickback from!!!!
Yeah ikr. Id be shitting myself if i were to use that lol
I've used one a lot and that was always my worry but, for whatever reason, I've never experience it nor heard of anyone who has.. they don't spin that fast perhaps, or the lumber sizes you're cutting resist pinching just due to their size?..
@@adammacer don’t know other brands’s beam saws, but this one has a riving Knife, maybe that helps avoiding pinching? Just my opinion, I don’t know for sure.
I’ d be more worried about using that kind of beam saws (don’t know if it’s the right name) that have bar and chain like chainsaws.
@@riccardovazzoler8517 Yes, of course - that would make a big difference for sure. I don't recall ours being fitted with them but probably were.
Those saws never really kick back. The slow RPM, ratio of power to weight and especially the diameter of the blade make it far less powerful than normal size saws per kilo. They just stop and that's it.
I wish Gaston came to my town but then I would spend too much money. He finds the coolest tools.
New to work working here. Definitely a mallet! Feels like my chisel won't break when I hammer down hard haha.
Don't Mafell make a 610mm hand held saw that takes two men to operate...one pushing and one pulling?
Yes, a buddy has one.. used it once on a job I was helping on.. an insane, and insanely heavy, bit of kit..
I have the backpack and the tool pouch they are the best tool bags out there. I ha e had the backpack for a few years now and its wah better then anything I have used in 14 years as a residential service plumber.
Gaston always has a way of showing up on the best of days.
Wera tools are the absolute bomb! I am from Holland and it's still quite unknown here but you can buy it at the right places. Once you bought one set, there's no going back to other brands! By far the best brand I've used for hand tools. Cool to see the brand in your vid.
I was 19 when I ran a beam saw while building prefabricated log homes. Biggest hand saw i ever opperated. Largest saw i ever used and did maintenance on was a band saw on a track powered by hydraulics that had a 20' blade talk about power! I ran some freaking amazing equipment in that job.
£3180+ in the UK for that Mafell, they do a chain beam saw as well with a cut depth of 400mm. Makita do a 415mm circular but only in US because it needs a 16A 240v supply
I use a mallet for the chisel. And I would love the Milwaukee battery mounts!
Great video Scott we have used Veto pro pac bags for years in the USA and in my opinion the best on the market from a electrical contractor point of view
I dont have instagram, but im subscribing to your patreon. I would love festool mounts! And definitely a mallet haha.
Love new toys. I have a few of the Rali Planes. They are pretty good
Great hard working mafell saw, we use them for ripping oak beams.
Always a mallet. Great tool collection.
Great video. I like these tool ones. I like tools just like you guys.
I know which category of Advent calendar users I fall into: have been using my full kit from Gaston for a couple of weeks now. And good to see Gaston took the plunge to stock Veto. I got a TechPac earlier in the year, it’s one of the best tools I own.
The Wera collection is by far my favourite drivers and bits I've ever seen, I keep the compact one that has the bits hidden inside it on me at all times, I'm slowly building up my set of Wera tools because they are expensive but they feel like they'll last a lifetime.
I am a wood worker right out side of NYC. And I use a hammer with a rubber tip I pulled off a clamp to use with a chisel. Works pretty good for me. A great way to get those perfect little details. Dewalt please 😆
I’m from Canada and I like what you do on your UA-cam channel. Thats a big one and that’s what she said
10/10 the veto bags for hvac, I use the tech lc and the tp4 for rooftops carries everything needed for 90% jobs
Rali handplaner does actually have two sharp sides per blade. So if one side i broken, you switch it around and start using the other side of the blade. Blades do really last long.
Mallet for chiseling but sometimes in a hurry hammer sideways. Would love to mount my dewalt batteries. Seriously "The saw" i don't think I even have space for it in my van.
Hi Scott and Gaston I use hammer general use and my main battery power tools Makita
Nice saw. Mallet for chisels and Dewalt mounts please.
Got large set of Wera gear years ago at bike show. Torque wrench perfect for carbon fibre bicycles.
Every time Gaston is in one of your videos, my bank account shrinks.
Never stand behind that beast of a saw again Gaston.great video 👍
The dust port-to-face feature on the Big Bertha is quite the innovation.
I have used a similar sized saw. But it was on a track which made it very easy. Soft start and very smooth. The 9inch Hitachi was more scary as it was just rough.
What a bit of kit that beam saw is. Bet it would do a good job ripping a drum kit in half! 😂😂
For general chisels - you should not use a hammer or a mallet just the palm of your hand. But is you have to then the correct tool for driving a chisel is a mallet. The hammer delivers a shock type blow which is unsuitable for controlled removal of waste using a chisel.
These are the best videos with Gaston
I have my batteries in the van on stealth mounts, easy to grab without digging through boxes to use or change. Also have that mini hultafors pry bar, really useful and surprisingly strong
G, day Scott, team and Gaston.
Q1. I do use a handmade HWD mallet for striking chisels. This is out of tradition, but also avoiding chipping handles.
The beam saw: Yes, I could appreciate a milling process with a rail saw erected over a log. Then power (generator).
* Douglas fir and cypress pine plantations. Stack timber for natural seasoning.
🌲🌲🌲🌳🌲🌳🌲