You two just blow me away sometimes. You are so cute together and you make a great team. I love the way you interact and also think you set a wonderful example for other couples. Very proud of you both. Looking forward to seeing you very soon and love you both to bits! Big hugs from A. Deb xxx Love and pats to Jorja too! ❤❤🐕🦺🦮🐕🙂
Aha epic! That would of been around the time I saw you driving through the blue mountains. We just came back from doing that exact same track!! Did it in a stock y62 with just wheels no lift. Struggled not to do damage but made it!
Great video Josh looks like you might have to get your self a new Winch unfortunately. Those water crossings look great you both should of stop and had a swim and let your dog get out and had a play in the water he or she would of enjoyed it.
I have a 9 year old runva that has never let me down, been on a bunch of different cars and I only used it an hour ago to pull a project into the shed. I run 70mm2 cable and mount the solenoid behind the grill with in-cab controls. Always works.
Beauty mate! I had a runva and it cut out in the water up at Cape 3 years ago and cost us a car! Going to throw a Warn in I reckon. Thanks for watching!
@Travelling Campers a lot of the time it's the solenoids. Warn had the worst design for solenoids with the multi solenoid. I would get an albright and run it like a winch truck, make it so you can get to it and it's serviceable.
Just a quick note. Our winch was working fine on Wednesday (midweek), went our on Sunday, hit a spring (water spring, soft ground) and just sank. Quick as lighting I run out the winch, hit the remote switch, nothing. WTF. I get out, flick remote button, nothing, frustrated as hell as it worked midweek. I radioed for assistance, a chap came to assist & winched us out Why tell you this? Well I have a winch rope wrapped around the bullbar as I can't retract it, ha. I gets home, hit the remote, winch fired up, bullshit, but I had to stop as rope still wrapped around bullbar. Unwrap it, lay it out, hit the remote, nothing. Now I'm as frustrated as hell. The remote was fine, continuity all good. All indicated the solenoids in the control box. Pulled apart, can't fault, no arking or burnt contacts, all sweet. So I run continuity checks on winch motor, all appear okay but I have discounted the remote and solenoids, hence I pull the motor down. Again all appears okay what can it be? Eventually I discovered the internal winding earth had a bad contact with motor housing, it tested fine with continuity of multimeter, but arked and broke down when voltage applied. This was poor workmanship, as the eyelet was just clamped by bolt & nut onto the housing. I removed the bolt, emery clothed surfaces to remove arking, then reassembled with a conductivity washer between eyelet and housing plus a spring washer between eyelet and nut. That winch now works everytime. For peace of mind, I painted the external screw head white, why? If it ever fails again, I'll know which screw to go to first to resolve issue, but I suspect it'll never fail again. Moral, Check your internal ground wire for motor if the new solenoid box doesn't resolve issue. A conductive washer is real cheap compared to a replacement winch.
Some awesome lakes around! The freespool is quite hard to get to especially for Mikayla, I couldn’t get out of the car and let off the break. Thanks for watching mate
You two just blow me away sometimes. You are so cute together and you make a great team. I love the way you interact and also think you set a wonderful example for other couples. Very proud of you both. Looking forward to seeing you very soon and love you both to bits! Big hugs from A. Deb xxx
Love and pats to Jorja too! ❤❤🐕🦺🦮🐕🙂
Thanks so much ❤️👯♂️
Yeah thats a good hill that one
Nice video 👍🤠
You nailed it mate! I just needed the rear locker or actually just some more balls haha. Thanks for watching mate!
مقطع رائع جدا ًوممتع هذه السيارة ذات شعبية كبيرة في السعودية ،، ❤❤
Thanks for watching!
Aha epic! That would of been around the time I saw you driving through the blue mountains. We just came back from doing that exact same track!! Did it in a stock y62 with just wheels no lift. Struggled not to do damage but made it!
Epic mate some awesome tracks out there! Enjoy mate!
Awesome content and love the video
Thanks for sharing and see you legends on the next one 👍 Greetings and cheers 🍻 from south africa 🇿🇦
Cheers guys! 🇦🇺
Awesome episode once again Josh... Super pumped
Thanks for watching as usual guys! 🎉
Great video guys would you be able to put up the track you went on keen to give it a try lol
Firetruck hill mate 🔥
@@Travellingcampers cheers mate will check it out on the VMS 👍
@@Travellingcamperssorry mate had a look on the VMS and which entrance did you take
Swap out the contact box for an all bright one and also upgrade the wire to the winch I run 00 cable from the battery to the winch
Thanks mate!
Great video Josh looks like you might have to get your self a new Winch unfortunately. Those water crossings look great you both should of stop and had a swim and let your dog get out and had a play in the water he or she would of enjoyed it.
Yeah will get this new control box and see how it goes! Such an amazing area around there! Thanks for watching mate!
Sooo awesome 👍❤🤘
Thanks for watching 🙌🏼🙌🏼
What is the cooker you guys use and where ya get it ?? Ya reccomend ? - Cheers
The brand is called camp master mate we got it from a mitre 10 store in Broome actually haha. You can get them from bcf mate, been handy as!
I have a 9 year old runva that has never let me down, been on a bunch of different cars and I only used it an hour ago to pull a project into the shed. I run 70mm2 cable and mount the solenoid behind the grill with in-cab controls. Always works.
Beauty mate! I had a runva and it cut out in the water up at Cape 3 years ago and cost us a car! Going to throw a Warn in I reckon. Thanks for watching!
@Travelling Campers a lot of the time it's the solenoids. Warn had the worst design for solenoids with the multi solenoid. I would get an albright and run it like a winch truck, make it so you can get to it and it's serviceable.
@@Brennomac83 Copy that!
💯🔥🔥🔥 vid
Thanks for watching mate 🔥
Go warn bro they've never let me down
That’s what I’m going for next bro 100% 💪🏻
Just a quick note.
Our winch was working fine on Wednesday (midweek), went our on Sunday, hit a spring (water spring, soft ground) and just sank.
Quick as lighting I run out the winch, hit the remote switch, nothing. WTF.
I get out, flick remote button, nothing, frustrated as hell as it worked midweek.
I radioed for assistance, a chap came to assist & winched us out
Why tell you this?
Well I have a winch rope wrapped around the bullbar as I can't retract it, ha.
I gets home, hit the remote, winch fired up, bullshit, but I had to stop as rope still wrapped around bullbar.
Unwrap it, lay it out, hit the remote, nothing.
Now I'm as frustrated as hell.
The remote was fine, continuity all good.
All indicated the solenoids in the control box.
Pulled apart, can't fault, no arking or burnt contacts, all sweet.
So I run continuity checks on winch motor, all appear okay but I have discounted the remote and solenoids, hence I pull the motor down. Again all appears okay what can it be? Eventually I discovered the internal winding earth had a bad contact with motor housing, it tested fine with continuity of multimeter, but arked and broke down when voltage applied.
This was poor workmanship, as the eyelet was just clamped by bolt & nut onto the housing. I removed the bolt, emery clothed surfaces to remove arking, then reassembled with a conductivity washer between eyelet and housing plus a spring washer between eyelet and nut.
That winch now works everytime.
For peace of mind, I painted the external screw head white, why?
If it ever fails again, I'll know which screw to go to first to resolve issue, but I suspect it'll never fail again.
Moral, Check your internal ground wire for motor if the new solenoid box doesn't resolve issue.
A conductive washer is real cheap compared to a replacement winch.
There you go mate thanks for sharing!
hi Jeje's friend's
Hey mate!
Get a Runva or Warn Winch
Had a runva and it cut out in the water and cost me a car. Going to get a Warn 💪🏻 Thanks for watching mate!
doing things it's not made for ? hang on let's see. lake Wallace was better than Lyle I thought. 🏞️🛻🤙😎📹
you waste all ur battery winching out . should always use freespool. 🛻🤙😎
Some awesome lakes around! The freespool is quite hard to get to especially for Mikayla, I couldn’t get out of the car and let off the break. Thanks for watching mate
was your winch rope binded up and it was going out on in and in was out ?
or is it the switch on the controller not working correctly ?
@@brentmcd12 Its a problem with the control box mate, got a new one to go in.