I always enjoy your vids. You give great advice and make us laugh. I am in Trinidad and Tobago and show some of your vids to the guys. We really enjoy it.
i believe its Rico the Barber who swaps out the ceramic blade on his fast feed. Did you have to "notch" out your fast feed housing as well to get the ceramic blade to move while the lever was open?
Hey Jeezy I just tried to add the ceramic blades to my fast feeds and when I open them they lock....can you give me the link on how to zero gap the fast feeds better.
Facts lol. Them joints run through hair like mf. I kept my ff normal no zero gap and use it for fading and just use my my masters for cutting debulking, and knocking out the bottom line.
how does the skin hold up over time, im worried in a year itll look like shit. Owned my burgundy fast feeds over 10 years..dropped them now the motor runs erratically softly turning off. Excited about amazon taking my money today.
say mane when u added the ceramic blade did u have to do any modification or u can just slap those on there and they open and close just fine? I got the same setup just haven't put the ceramic on there yet
I got this clipper last week the lever is TIGHT even after loosening screw. Is is just like that? Or did I get a lemon? I am used to wahl and they lever smooth like butter
Do you hv problems cutting over curly hair with the fast feeds? I feel lk the masters cut it better. I would also love to see a video on how you deal with over curly/NAPPY hair.
Hey jeezy i replaced the my oster fast feeds blade w the ceramic corse blade and when i open the lever up all the way the metal rubs against the blade n makes a loud noise. Any solution ?
Yo 360, I got a question. So I just did the same thing you did. I put an Andis ceramic blade onto my Oster Fast Feeds. But now when I turn the clippers on, the blade doesn't move.... am I doing something wrong man??
Bro I like that you are becoming a better barber but in my opinion and cutting my hair for three years now I have the andis fade masters and the oster fast feed. The andis fade masters already come with a zero gap and you don't have to buy another guard to make it zero. But the osters are good but the andis are a little better when it comes to fading and tapering. The only downfall to the andis is that they can overheat but the osters don't
When it comes to clippers it's more personal preference I like the wahl seniors, but I think 360 doesent like em. But it isn't the clippers it's the barber whatever works best for you
+360Jeezy how come the ceramic blade doesn't glide on the fast feeds when u replace the old blade with the ceramic? it doesn't wanna glide even after its been oiled can u help me out?
Nah man you might start jamming people in the head! Get use to your machine first till you cut comfortably then try modding, if your cuts look good without mods think of the possibility's with em 👌
MrCfiveonit well it just get a closer to a zero gap no? I have a whal designer and does not blend the way I want it I we’ll just use it as a “balding clipper” don’t have the real balding clippers in my hometown but yea I we’ll soon get these fast feeds and see how god they work with the ceramic blade 💪🏽🤟🏽
***** I just got those today. I'm just waiting for that blade and I'm good and set. The barbers at the shop don't know that I got them lol, therefore, I'm gonna surprise them.
Man throwback !! Crazy how this is 7 years ago!! Lol I was just starting my barbering career, this is the video that got me wanting fast feeds
Bruh! Still loving that intro... sn: going to barber school because of you.
Intro weak as fukk! But he can cut !
Just ordered my fast feeds coming from the masters, I look forward to using these! Great video!
*****
Yoooooo!
You cut hair bro?
I've been cutting hair going on 15 years now I'm not licensed but I have a of clients....
Reese Funky Drummer R. Same here !!! But going to school to get my L's !!!
ken mcgill same
Is the one they use on pets too
I always enjoy your vids. You give great advice and make us laugh. I am in Trinidad and Tobago and show some of your vids to the guys. We really enjoy it.
Thats crazy, I just ordered those exact clippers like an 2 hours ago on ebay. Lmao
The timing of this review couldnt have been more perfect.
Mr. Popo crazy how it’s been 5 years
i believe its Rico the Barber who swaps out the ceramic blade on his fast feed. Did you have to "notch" out your fast feed housing as well to get the ceramic blade to move while the lever was open?
I'm 'bout to subscribe from your intro alone...good detailed vids.
Hey Jeezy I just tried to add the ceramic blades to my fast feeds and when I open them they lock....can you give me the link on how to zero gap the fast feeds better.
Do you lower the cut with these or only blend with it
U Helped me out because I was debating on the fast feeds and the masters. I know what u mean when u say they cut too much.
Facts lol. Them joints run through hair like mf. I kept my ff normal no zero gap and use it for fading and just use my my masters for cutting debulking, and knocking out the bottom line.
Is that a ceramic blade?
Is the White ceramic blade for pets? If so what teeth are you using on these?
Can't wait to get my fast feed and adjust them to get that blend with no hassle
Just what I been asking for a video on!!!
***** chea!
Love the video and love those fast feeds
He be hitting his notes on the intro 🤣
Nice video bro. Question when I use my osters after a while the ceramic blades slides out the side almost as if it's not set in place?
0:17 “You see me, I eat, sleep, shit, and talk rap, you see that 98’ Mercedes in TV I bought that.”
the 0A detachable gaurd is also good. take the cutting blade off of the OA gaurd and it zero gaps easy and cuts fades crispy and fresh.
Darius Brown hey you confirm the regular OA fits? And not the OA fd, because there are 2 of them
Hey @360Jeezy is your paint coming off your fastfeeds?
LaCe mine are
Did you have any issues with the ceramic blade not moving on the fast feed after it has been installed?
+Michael V (OneSoDope) I'm having the same issue have you come up with a solution?
I'm having the same issue
@360Jeezy I found some ceramic blades on amazon which ones do I get the (Coarse cutter) or (Medium cutter) I have a oster fast feed
Ayyye Jeezy
Q: I got the gold speedlines .. Can you use it's stock top blade with the ceramic upgrade without problem too ?
how does the skin hold up over time, im worried in a year itll look like shit. Owned my burgundy fast feeds over 10 years..dropped them now the motor runs erratically softly turning off. Excited about amazon taking my money today.
Where can I get the same clipper
Bro do you have a link for that white blade? Thanks
Did you have to cut the piece the cutting blade sits on ?
say mane when u added the ceramic blade did u have to do any modification or u can just slap those on there and they open and close just fine? I got the same setup just haven't put the ceramic on there yet
Hey bro did u put the ceramic blade in?? Did it work?
You can order that ceramic cutter blade by itself on Amazon way cheaper around$10 vs buying the whole #1 andis blade which is around $25
Garrick White link
Love your videos jeezy, 🙌 what you think of the remix wave butter
I got this clipper last week the lever is TIGHT even after loosening screw. Is is just like that? Or did I get a lemon? I am used to wahl and they lever smooth like butter
Do you hv problems cutting over curly hair with the fast feeds? I feel lk the masters cut it better. I would also love to see a video on how you deal with over curly/NAPPY hair.
real question is What blade is better medium or coarse blade! I have the coarse blade on mine though.
What do you i should get the fast feed or masters
I have a question if you use the andis nano magnetic guard with the ceramic blade on will it fit?
In the barber shop clownin! Dude at the end said KTVU, so ya'll must be in the Bay.
Hey jeezy i replaced the my oster fast feeds blade w the ceramic corse blade and when i open the lever up all the way the metal rubs against the blade n makes a loud noise. Any solution ?
Do you have use Wahl seniors ?
Ksmitty271 naw I never tried them... I don't like how they feel in my hands
Yo 360, I got a question. So I just did the same thing you did. I put an Andis ceramic blade onto my Oster Fast Feeds. But now when I turn the clippers on, the blade doesn't move.... am I doing something wrong man??
I found it bro, I appreciate it.. And its not cheap at all. Only $10.50 for the blade.. Thanks bro 👍
What do type in to find?
+alex flores put andis ceramic edge blade
+Phillip Rivera so it is the coarse blade ?
Yes
+Phillip Rivera I've been reading that's it's the "Medium" ceramic blade?
Yo man! What do I type in to find the number one blade that you use???
I believe it's a coarse blade.. Coarse blade are deeper tooth like the one in the video.
hey man was wondering if you have any blade recommendations for the walh hero trimmers?
thank you
T Wide blade
Oh thanks man....do you know of any places or websites I can send my blades to get sharpened??
+Miahawcal just look for sharpen blades. Try therichbarber dot com
Can u use them to cut hair off to like a 1/5 or just to taper and fade
is that a coarse ceramic blade or a medium ceramic blade
Dan Vo coarse ceramic blade
It's the Medium The Coarse Doesn't work On Fast feeds
A bruh all yo vids dope..helpful and detailed as shit..you cold with the clippers too.
is that blade plastic? it looks like it for real...
Nice video!
which one of the size OA fits? the regular OA or the OA fd? some one please let me know
Ya'll be crazy up in the shop...LOL!!
Need these for that low skinned fade.
What does zero gaping do? Also what is it used for?
+Kingsley Enechukwu
Close cutting. Ideal for bald fades and taking out the line made by trimmers.
is it David warren?
Why zero gap them? Do they not cut good just out the box?
Godini ThaGod So you can get crispy lines on a zero fade 👍
Why would you want any kind of lines on a fade?
Godini ThaGod the zero gap makes it easier to get the fade lines out and he adds a ceramic andis blade because it's better and cuts better.
Do I use the medium or coarse ceramic cutting blade to zero gap my fast feeds @360Jeezy
Bro I like that you are becoming a better barber but in my opinion and cutting my hair for three years now I have the andis fade masters and the oster fast feed. The andis fade masters already come with a zero gap and you don't have to buy another guard to make it zero. But the osters are good but the andis are a little better when it comes to fading and tapering. The only downfall to the andis is that they can overheat but the osters don't
When it comes to clippers it's more personal preference I like the wahl seniors, but I think 360 doesent like em. But it isn't the clippers it's the barber whatever works best for you
+360Jeezy how come the ceramic blade doesn't glide on the fast feeds when u replace the old blade with the ceramic? it doesn't wanna glide even after its been oiled can u help me out?
can anyone help me out?
+Sid Magana Get the 0A detachable blade from Oster.
Either you tried the wrong blade or you need to adjust your tension
Removing the lever screw n sliding the lil hole from the lever screw down... u still can keep the same blade
I needs those riiii thuurrr
Would u still oil the blades with the new plastic blade?
Ricks927 yes, and cool care too. It will run smooth and nice for the long run!!
220volt or 110volt? So can't use in Indonesia?
So I did the swap on the fast feed with the ceramic blade and I have like a high pitch noise that I can’t fix on the clippers can y’all help me
Jose Villanueva might of got the wrong ceramic blade cause there's 2 of them
you got the dopest intro 🔥
I'm 16 and I'm a beginner should I zero gap my fast feed?
Nah man you might start jamming people in the head! Get use to your machine first till you cut comfortably then try modding, if your cuts look good without mods think of the possibility's with em 👌
Hmmm... ive heard the osters motor is powerful than the andis magnetic motor..
tried to zero gap mine but it didnt go all the way back... i dunno why
what if I use on OA blade?
+Mike Brady That'll do too.
Nice👍👍👍
Larry the barber does it like this
Just as I thought, those fast feeds will not zero gap with original blades
Been trying to do it for years
you need the coarse cutter part #64440
THANK YOUU!
Waste yute It's Not The Course It's medium
Man jeezy can you do a method how to better your wavesno body makeing methods no more. Chea !!!!!!
Nice bid even though I can't cut hair
is that clipper made in China?
Made in United States cause I have the same clipper.
It's a coarse blade.
Is the cemaric. Blade course or medium
Francisco Flores course
The idea of the ceramic blade came from egiang24 on youtube so give him the correct shot out don't be a troll
MrCfiveonit well it just get a closer to a zero gap no? I have a whal designer and does not blend the way I want it I we’ll just use it as a “balding clipper” don’t have the real balding clippers in my hometown but yea I we’ll soon get these fast feeds and see how god they work with the ceramic blade 💪🏽🤟🏽
6:10😂
360!!! 360!!! 360!!!
***** I just got those today. I'm just waiting for that blade and I'm good and set. The barbers at the shop don't know that I got them lol, therefore, I'm gonna surprise them.
Bro where did you find the blade at? Do you have a link for it?
Phillip Rivera you have to order one... from ebay or amazon.
+Chris Cole ok but what do I type in for the description cuz I typed andis 1 detachable blade and the blade didn't come up
+Phillip Rivera its called Ceramic Blade. It's either on Amazon or Ebay.
+Chris Cole is it the medium blade or coarse blade?
Yo laugh tho😂😂😂😂
I tried it.... its a bad cut when you do it
that dude really quoting Suge Knight lmao
Yo jeezy why the one blade. Don't most blades are 000 think it's better with the one.???? Hit me up on @l0giic on Instagram plz thanks
#knowledge
Aye
Нигасы та все убитые))
2022
The coarse ceramic blade does work 😂😂 🤣😭 😭 🤦🏿♂️💯 💯
Too much rowdiness in there
Dudes haircut at the end is whack! blends are bad, very bad!
the intro :/
with the ceramic blade on what do they open up to compared to stock ?? do they open up to a 0.5 now instead of a 1????