Take that fuel filter off, as it’s a gravity fed system, you don’t know if it’s restricting flow over time causing a lean condition, unless you constantly do plug chops. It already has a screen in the tank for that purpose.
Great vid. Another easy trick is to back out the idle adjusting screws and use the shank of a drill bit as a feeler gauge (usually around .040"+-) and adjust the cables to suit, it gives a real good starting point
Need a set of Mikuni carburetors for my Yamaha Banshee the ones that I brought does not say Mikuni it does not want to stay running it doesn't want to stay running I have to spray starting fluid then it starts up I can wrap it up but it cuts off why is that?
Great video! Do these procedures work with Raptor 660? It would be awesome if you could make a video about synchronizing/tuning carbs for a raptor 660. Your videos always have plenty of helpful information and tips. Keep up the great work!
Yeah I just bought a banshee it’s got aftermarket pipes ,t-5s Aftermarket carbs the force I can’t get this thing run right it’s Has no lo end somebody please help me jet This thing what jets to start with
Thanks to video I was to be able to adjusted my carb now running a lot better
Take that fuel filter off, as it’s a gravity fed system, you don’t know if it’s restricting flow over time causing a lean condition, unless you constantly do plug chops. It already has a screen in the tank for that purpose.
Great vid. Another easy trick is to back out the idle adjusting screws and use the shank of a drill bit as a feeler gauge (usually around .040"+-) and adjust the cables to suit, it gives a real good starting point
pro trick: you can watch movies at Kaldrostream. Been using them for watching lots of of movies recently.
@Casey Ayaan Definitely, have been using kaldroStream for months myself :)
You guys need a carb syn tool that way it's pulling the same amount of air for sure
Want to get lectron carbs for stock set up what some other components I need for it
Need a set of Mikuni carburetors for my Yamaha Banshee the ones that I brought does not say Mikuni it does not want to stay running it doesn't want to stay running I have to spray starting fluid then it starts up I can wrap it up but it cuts off why is that?
Great video!
Do these procedures work with Raptor 660?
It would be awesome if you could make a video about synchronizing/tuning carbs for a raptor 660.
Your videos always have plenty of helpful information and tips. Keep up the great work!
Dave 2001 ehm, I don’t think so. The 660 carbs look like butterfly carbs whereas the banshee is a slide carb.
Thank you very much for making these vids!!!!!!! I have and still do order parts from RMATV! Awesome..
Is there a reason you start with the right instead of the left?
What size jets are you using with the fmf pipe system?
Yeah I just bought a banshee it’s got aftermarket pipes ,t-5s Aftermarket carbs the force I can’t get this thing run right it’s Has no lo end somebody please help me jet This thing what jets to start with
@John Tripp depends on altitude. 290 to 310 mains and 27.5 to 30 pilots. needles set in the middle position and air screws roughly 2 turns out.
does the main jet always have to be the same?
Main jet has to be the same on both carbs
Is the white banshee the one with the QA topend kit?
Yes it is.
Where are you located
We are located in Payson, Utah.
My carbs are different idk
Nah, nah, best way is to get rid of Grandma's grocery store cart(your Ban-She) and buy a dirtbike! BRAAP BITCHES!!!!