Mercedes ML500 3 of 4 ABS VSS wheel sensors dead; send no signal measure no ohms w163 ML320

Поділитися
Вставка
  • Опубліковано 24 лип 2020
  • I'm baffled at this - the Full Scan of our ML500 by pro level Foxwell NT530 did show no signal from both Front & RR Wheel Speed Sensors.
    The Left Rear does send a signal as it should, and ohms read 1155.
    Live Data also showed this...3 dead 1 functioning speed sensors.
    Yet all 4 are new (aftermarket)
    Perhaps relevant, the one functional is Left Rear and was replaced first approx January 2020.
    The remaining 3 were ordered & replaced at one time March 2020 - and instead of improvement or causing left "3 light salute" ABS-ESP-ETS to clear, it got worse with (now) continuous beeping & vehicle locked to Limp Mode 1-2 gear no higher, continuous beeping above 4, mph.
    Thanks for reading - any & all comments are appreciated - God Bless you - David in East Texas
  • Авто та транспорт

КОМЕНТАРІ • 3

  • @hellosunshine1090
    @hellosunshine1090  3 роки тому +2

    SOLVED !
    I had installed the Wrong wheel speed sensors for my chassis #, I had put in 2003-2005 sensors when I really needed 1998-2002 speed sensors.
    Video here:
    ua-cam.com/video/_-C3FR_2NgY/v-deo.html

  • @mr.mrs.keesee1169
    @mr.mrs.keesee1169 28 днів тому

    Good job brother

  • @stevef.m.2188
    @stevef.m.2188 3 роки тому

    Thanks