How To Remove & Install SVE Fox Body Mustang Radiator - (1979-1993)

Поділитися
Вставка
  • Опубліковано 30 жов 2024

КОМЕНТАРІ • 49

  • @dntlss
    @dntlss 2 роки тому +3

    I bought 2 of these, they are a great radiator for the money,i get compliments on it all the time,nice hand welds, i dont romp on my Mustangs all the time so experiences vary but with my driving style they keep my cars cool all day long in 100 degree heat.

  • @sto1asgoetia600
    @sto1asgoetia600 2 місяці тому

    A new video with a newer fox mustang with the factory electric fan shroud would be nice

    • @latemodelrestoration
      @latemodelrestoration  2 місяці тому

      What exactly are you talking about? I'm not sure I understand what you're wanting us to do. "Factory electric fan shroud" is pretty vague. Thanks. -Landan

  • @Pogomobile
    @Pogomobile 3 місяці тому

    I bought one of these in 2020and it already shit the bed. It cracked right at the seam, so I'm not sure if I'm going to go with the SVE radiator again.

    • @Dannymclovin
      @Dannymclovin 2 місяці тому

      What did you buy instead? I'm pretty sure the cheap 100 eBay radiator are the same as this one

  • @champking20
    @champking20 3 роки тому +2

    Doing this today 💪🏾

  • @scottclark2413
    @scottclark2413 Рік тому +1

    Do i just cap the two transmission ports with brass plugs in a manual application?

    • @latemodelrestoration
      @latemodelrestoration  Рік тому +3

      You don’t have to. Coolant won’t leak out if they are left opened. -Landan

    • @scottclark2413
      @scottclark2413 Рік тому

      @@latemodelrestoration thank you sir!

  • @JevanteBenavides-kx9uq
    @JevanteBenavides-kx9uq Рік тому

    is there a specific coolant that should be used with this radiator?

    • @latemodelrestoration
      @latemodelrestoration  Рік тому

      Jevante - We recommend whatever the owner's manual suggests for the year of car that you own. -Landan
      Here is a link to the Motorcraft coolant on our website: lmr.com/item/LRS-VC5/motorcraft-vc5-concentrated-antifreeze-coolant-green-79-04

    • @JevanteBenavides-kx9uq
      @JevanteBenavides-kx9uq Рік тому

      @@latemodelrestoration sounds good , thank you very much !

  • @jucedcustoms2274
    @jucedcustoms2274 2 роки тому

    Little Landon!

  • @Dee2000
    @Dee2000 Рік тому

    Thanks

  • @frogfrogger6260
    @frogfrogger6260 6 місяців тому

    What was wrong with the original radiator? I believe mine has an aluminum one in it. Want to go back to the original. What did you do with the original one?

  • @Bandwidth24
    @Bandwidth24 19 днів тому

    At least spray paint the rusty retainers.

  • @sav22rem22
    @sav22rem22 3 роки тому +2

    Which size battery was in the car at the time of filming? I can’t fit my overflow tube on because the battery is too close to the radiator

    • @latemodelrestoration
      @latemodelrestoration  3 роки тому

      This video was filmed back in 2017 and we don't have that Fox Body anymore. So unfortunately, we don't have the measurements for the battery.

    • @Clos_buildz
      @Clos_buildz 2 роки тому

      Mine is the same, rn I have a vitamins water bottle as my overflow tank. I am gonna have to relocate the battery in order for it to fit properly

  • @johncomeaux-sengmany7392
    @johncomeaux-sengmany7392 2 роки тому +2

    what about burping the radiator?

  • @crimson9069
    @crimson9069 5 років тому +3

    My radiator wont come out

  • @michaelkresin136
    @michaelkresin136 6 років тому +1

    What is the best way to get all the air out of the system after this new radiator install?

    • @latemodelrestoration
      @latemodelrestoration  6 років тому +3

      Have a friend fill the radiator with the upper radiator hose removed from the thermostat housing. When doing this, be sure and look into the upper hose to ensure that the coolant doesn't run out. This will push any air out through the upper hose.
      The other way to do it is to have the correct vacuum refill tool. -Landan

    • @tufgriz8917
      @tufgriz8917 6 років тому +7

      another easy way is to have the front tires up in the air such as drive on ramps to put the radiator at the highest point

  • @Eddie510s
    @Eddie510s 3 роки тому

    Do these clear Vortech super charger with contour fans ?

    • @latemodelrestoration
      @latemodelrestoration  3 роки тому +1

      Hey Eddie, feel free to give us a call at 1-866-507-3786 or email us with the link below and we'll be more than happy to assist you with making sure that set up fits with the radiator! lmr.com/contact

    • @Eddie510s
      @Eddie510s 3 роки тому

      @@latemodelrestoration most definitely thank you !

  • @topmodstv3682
    @topmodstv3682 4 роки тому +1

    What size are the automatic transmission cooler ports?

  • @robertelmo7736
    @robertelmo7736 4 роки тому

    How big an engine are these rated for? I have one behind a 393 but it is getting warm, may install the stock fan and shroud and see if that (electric fan) is the problem.

    • @dntlss
      @dntlss 3 роки тому +1

      I know this is a old comment but electric fans on a Mustang is the way to go,the bigger the engine the more a electric fan makes sense,for years i had cooling issues until i installed a electric fan,damn car runs at 190 in 100 degree weather all day long, best money i ever spent,only way that clutch fan and shroud goes back on is if my fan goes out and I'm waiting on a replacement, lol, hope you got your issue squared out.

  • @moneybandz7504
    @moneybandz7504 5 років тому +1

    Can you use this with a coyote swap?

    • @latemodelrestoration
      @latemodelrestoration  5 років тому +1

      Yes, we have ton's of Coyote swap customer use these in this application. We also used one of these on our project Mercury Rising.

  • @sergiomurillo9930
    @sergiomurillo9930 3 роки тому

    What’s that tool used for the hose clamps?

    • @latemodelrestoration
      @latemodelrestoration  3 роки тому +1

      It's a flexible hose clamp plier. You can pick them up at any local auto parts or tool store!

    • @sergiomurillo9930
      @sergiomurillo9930 3 роки тому

      @@latemodelrestoration thanks!

  • @williamcalihan3727
    @williamcalihan3727 4 роки тому +1

    With the new radiator being wider than the stock one, does the fan need to be offset back towards the engine?

  • @lsh3rd
    @lsh3rd 6 років тому

    I tried to install mine, but it won't clear the A/C condenser hard lines. Has anyone ever seen this before? The Griffin radiator it is replacing cleared with no issue.

    • @lsh3rd
      @lsh3rd 2 роки тому

      @@angrybastard7364 Mine eventually worked by bending the lines slightly... it wasn't an issue.

  • @RJBTrueBlue99
    @RJBTrueBlue99 5 років тому

    How full should the radiator be when cold?

  • @BAHRacingTeam
    @BAHRacingTeam 2 роки тому

    Are these tested before sending out?

    • @latemodelrestoration
      @latemodelrestoration  2 роки тому +1

      Hey there, we have tested and installed our SVE radiators on our own vehicles. We even have them installed on both street and race cars.

    • @BAHRacingTeam
      @BAHRacingTeam 2 роки тому

      @@latemodelrestoration awesome, thank you. I am wondering if you guys offer a military discount? I have an account setup on LMR, and was wondering before I make this huge purchase. Thanks again

    • @latemodelrestoration
      @latemodelrestoration  2 роки тому +1

      If you can, give us a call at 1-866-507-3786 and one of our customer care representatives can help you out with that! We don't have a military discount code readily available, but inform one of our CCR's and they can take care of you.
      You can also email us using the link below: lmr.com/contact

  • @nolancoward8787
    @nolancoward8787 4 роки тому

    where do i get this radiator?

    • @latemodelrestoration
      @latemodelrestoration  4 роки тому

      Right here! - lmr.com/item/SVE-8005A/1979-93-Mustang-High-Performance-Aluminum-Radiator

  • @Rumeel12708
    @Rumeel12708 5 років тому

    Will be picking this up, but first I need a new carburetor. Maybe new fuel lines as well.

  • @MountainValleySpringWater
    @MountainValleySpringWater 4 роки тому

    Look at young Landon lol