@@upravytdi your right it has become a lot easier to find info on how to deal with all of the electrics these days. But when i build mine back in 12 my old engine broke friday and i needed it to work by monday so i kinda had to mtdi the only engine i could find. But i had it running sunday at mid day and it has been running fine since, only problems has been non mtdi related
@upravytdi I have 2 files HHH_868 and LLL_867 with immo off. Will ecu software with immo off bypass the immo chip meaningi dont need to change the 8 pin immo eprom?. Hope that makes sense. Thanks for answering me 👍
@upravytdi I have 2 files HHH_868 and LLL_867 with immo off. Will ecu software with immo off bypass the immo chip meaningi dont need to change the 8 pin immo eprom?. Hope that makes sense. Thanks for answering me 👍
@upravytdi iv read it will work bypassing start signal. Aparently i might get a blinking immobiliser light on the cluater but will keep running. I'm yet to try as waiting for a few plcc chips in post. Il let you no how it goes. 👍
Heyy! Nice video. Im learning how to doing an immo off on edc15, and I never made this. What do you apply with the syringue after take of the 2 fleas? (Idk if it's the rigg word, we call this "une puce" in french 😅) And with the copper braided, are you cleaning the pins or are you adding tin? Thank you :)
Hello, I tried a real estate off on 24c02 with 33 = 60 but it does not work. Can you help me because still broken down and blocked car thank you very much.
@@upravytdi i m so sorry friend I didn't see that you have answered me, I already received chips from dd motor sports in Portugal. Thank you so much, i'll contact you on messenger just to say thanks
and that was why i went mtdi in my mk2 but nice to see the procedure being done
i see no point in mtdi nowadays :-)
@@upravytdi your right it has become a lot easier to find info on how to deal with all of the electrics these days. But when i build mine back in 12 my old engine broke friday and i needed it to work by monday so i kinda had to mtdi the only engine i could find. But i had it running sunday at mid day and it has been running fine since, only problems has been non mtdi related
Is the map data stored within the epeom along with immo data?
immo data is in eeprom at 17:10 while ecu software is in two plcc at 0:30
@upravytdi I have 2 files HHH_868 and LLL_867 with immo off. Will ecu software with immo off bypass the immo chip meaningi dont need to change the 8 pin immo eprom?. Hope that makes sense. Thanks for answering me 👍
Great work, more detailed videos of tuning would be much appreciated 👍 also great choice of music ! Some bangers playing in the background
How do you read / write these old school chips I take it you need new writable chips ? also what tune software do you use ??
@@lovedashspam Yes, I am using new flash chips. For tuning files i use Winols.
where do you live?
@upravytdi I have 2 files HHH_868 and LLL_867 with immo off. Will ecu software with immo off bypass the immo chip meaningi dont need to change the 8 pin immo eprom?. Hope that makes sense. Thanks for answering me 👍
Hi, absolutely not sure about this to be honest... on MSA usually immo is bypassed in the eeprom... if it works for you in the flash, let me know :-)
@upravytdi iv read it will work bypassing start signal. Aparently i might get a blinking immobiliser light on the cluater but will keep running. I'm yet to try as waiting for a few plcc chips in post. Il let you no how it goes. 👍
Heyy! Nice video. Im learning how to doing an immo off on edc15, and I never made this.
What do you apply with the syringue after take of the 2 fleas? (Idk if it's the rigg word, we call this "une puce" in french 😅) And with the copper braided, are you cleaning the pins or are you adding tin?
Thank you :)
hi, its solder paste and the copper wire is for cleaning ;-)
@@upravytdi thank you 😊 do you have a website to advise me for buy some stuff for the operation? 😅
Thank you really much!!
@@alexchobert5307 depends on where are you from... you can try tme.eu
@@upravytdi im from france, it should be okay the .eu!
Thank you! 🤗
Hi man you still here ? I already chat with yiu
of course 😄 best way is to contact via whatsapp
Is that socket plcc32? And what program rdo you use to read/write those a 29f0?
Yes, it is. I am using MiniPro.
@@upravytdi thank you. And very good job soldering.
Luis Ferreira Thanks. It's like fifth? MSA, but i've modded a decent numbers of all kinds of ECU's ;)
Ahoj
Prosím tě, kolik by stálo vyřazení imobilizéru na jednotce Sharan 81kW, musí se bohužel letovat.
Děkuji
wa.me/message/KP3GD33FDAUFE1
Hello I have a BOSCH EDC MSA 15.5-7.12 ECU I would like to know what type of eprom to buy to be able to reprogram it, it is a Nissan Terrano 2
Hi, contact "upravytdi" on Facebook, i'll help you. ;-)
sorry i don't have facebook i have whatsapp
@@alexjajolet4183 wa.me/message/KP3GD33FDAUFE1
Hello, what programmer are you using for reading and writing maps
MiniPro
Hi mate, is there a way to tune via OBD once chips have been changed and socketed?
Nope. Not possible, just this oldschool way.
What type of paste do you use?
273°
Hello, I tried a real estate off on 24c02 with 33 = 60 but it does not work. Can you help me because still broken down and blocked car thank you very much.
Find "upravytdi" on Facebook and contact me there. ;-)
Thank, im install à julie emulator its good
Hello Freind, can you make chip for a mk3 afn with this set up:
Vnt 1749 VA
0.216 nozzles ( firad dsla 150 p 502). Thanks
Hi, yes. You can contact me on Facebook or instagram.
@@upravytdi OK friend
Hi, I didn't find links to join you, can you please send me your facebook or email?
@@mouadhnacer6521 search "upravytdi" on facebook
@@upravytdi i m so sorry friend I didn't see that you have answered me, I already received chips from dd motor sports in Portugal. Thank you so much, i'll contact you on messenger just to say thanks
Ahoj. Prosím kontakt na tebe. Děkuji
wa.me/message/KP3GD33FDAUFE1
immo off jest zbedny ,kazdy kto ma vaga robi adaptacje ecu i działa
Thanks god you came here and explained, we´ve been waiting for years for you.
Podrias explicar como haces para no anular el inmo?
Hello I have a BOSCH EDC MSA 15.5-7.12 ECU I would like to know what type of eprom to buy to be able to reprogram it, it is a Nissan Terrano 2
wa.me/message/KP3GD33FDAUFE1