My Favorite Tools for Arduino/Electronics

I show my modified toolbox with my most used tools for DIY electronics, arduino projects and 3D printing. Sponsored by PCBWay - Full feature custom PCB prototype service: www.pcbway.com/
Tools featured on this video (by category):
Soldering:
- Cordless soldering iron: amzn.to/2EvOB6I
- Soldering wire: amzn.to/355ZzMM
- Soldering wire case: amzn.to/2xQz2WK
- Desoldering wick: amzn.to/2tD9Z3J
- Flux pen: amzn.to/3cKYsUd
- Scratch brush: amzn.to/356jSc7
- Extra-thin scratch brush: amzn.to/3axV25L
Electrical:
- Self-adjusting wire stripper: amzn.to/2EaWsVV
- Wire stripper 22-30 AWG: amzn.to/2tC3ldV
- Multimeter: amzn.to/2EvMdN3
- Crimping tool: amzn.to/2EvHivO
- 3mm heat shrink tubing: amzn.to/2zmXZcv
- 4mm heat shrink tubing: amzn.to/3bGy9yo
Screwdriver:
- Screwdriver set: amzn.to/2H2OeC4
- Precision screwdriver set: amzn.to/2Ey9kXz
- Stubby screwdriver: amzn.to/2U943uG
- Low profile screwdriver: amzn.to/2Evi1BD
- Folding allen keys (metric): amzn.to/2tEmyeR
- Folding allen keys (inches): amzn.to/2IE33gT
Pliers:
- Insulated pliers/cutters 3-piece set: amzn.to/2zw342n
- Miniature long-nose pliers: amzn.to/2y1CNsn
- Ultra thin needle-nose pliers: amzn.to/2ExCQg8
- Locking pliers: amzn.to/2Y5px0g
- Cobra pliers: amzn.to/2S7QgFK
Cutting:
- Cutter: amzn.to/2IBM8vA
- Small flush cutter: amzn.to/2EwamTH
- Utility knife: amzn.to/3zi2krW
- Cable cutter: amzn.to/2Uf2jQw
- Deburring tool: amzn.to/2Xk48Oe
- Scissors: amzn.to/3cHZvEo
- Mini scissors: amzn.to/2znXZce
- X-acto knife: amzn.to/2IEke1U
- Spare blades for X-acto knife: amzn.to/2H1krtC
- Finger-tip knife: amzn.to/2XobUXx
Measuring:
- Tape measure: amzn.to/2VW2XVs
- Soft tape measure: amzn.to/2EvA1fo
- Ruler: amzn.to/2TdbPGW
- Caliper: amzn.to/3irt2sh
- Mini level: amzn.to/2SbcI0X
Tapes:
- Double sided tape: amzn.to/2EyfGpT
- Electrical tape: amzn.to/2Xnw6sw
- Rubber splicing tape: amzn.to/2XkDmW9
- Transparent tape: amzn.to/2znSEBI
Miscellaneous:
- Safety glasses: amzn.to/2SpZ07u
- Telescoping magnetic pick-up tool: amzn.to/2U6BbmP
- Flashlight: amzn.to/3ivz0Iw
- Sharpie: amzn.to/2VDZeNf
- Big file: amzn.to/353qY0Z
- Needle file set: amzn.to/3gCNUuf
- Long tweezers: amzn.to/2XkjpPf
- Precision tweezers: amzn.to/2BQbPTm and amzn.to/2U8Y2y3
- Chip extractor: amzn.to/3aEN1fm
- Brushes: amzn.to/2EwYwZF
- Super glue: amzn.to/3eQ1LeG
- Super glue accelerator: amzn.to/2yGANFS
- Putty knife: amzn.to/3eQ5Wam
- 6-inch zip ties: amzn.to/2x7yA5U
- Hook and pick set: amzn.to/2KvOg64
- Plastic pry tool: amzn.to/3iyZEjM
- Paint can opener: amzn.to/2KANW5W
- Razor-blade scraper: amzn.to/3aCAdpR
- Mini-microscope: amzn.to/2S9ePlJ
Materials to build the tool box:
- The tool box I choose: amzn.to/2EwV1lW
- Plywood to use as separators. I recommend finding any scrap material that you can use for this, but here’s an idea of what you need: amzn.to/2KElD6B
- Loctite Heavy Duty Epoxy Quick Set: amzn.to/2W0SWpZ
- Loctite Super Glue Gel: amzn.to/2W1xv8l
Note: As an Amazon Associate I earn from qualifying purchases.
Website: www.interlinkknight.com
Patreon: / interlinkknight

[@David-yp7bk]

The level of organization is stunning, very well done. :D

[@HerculesSupra4GP]

Absolutly nice to have!!!👍🏻💪🏻

[@kenrock2]

i love your setup.. it makes it easy to find your tools

[@interlinkknight]

Thanks :)

[@melbournecrosbie]

I like video very much. List says Small Lever. But tool is Small Level. Please make more videos.

[@jstro-hobbytech]

I have been slowly replacing my tools with knipex. I got some small electronics snips and pliers for my birthday last month and now I'm obsessed. That crimper is the best one I've ever used. You should have a second small cheap multimeter for measuring volts and use the other for amps. I buy multimeters and magnets all the time to give away. I grab them on sale. Same with soldering stations. T12 clones usually.
I go to the local makerspace alot amd leave them there for people to take if they don't have the means to have them otherwise to work on projects at home. I use the honor system. All I ask is that the person put the items to good use. I just leave them there so people think the makerspace own them to give away.

[@interlinkknight]

That's awesome! Thanks for sharing

[@shanthiranasinghe5465]

👌

[@aleksandarlazarevic95]

Can you make a DIY video about this tool case you customized ?

[@interlinkknight]

What exactly you want to know about it?

[@aleksandarlazarevic95]

@@interlinkknight I want to know how you made all these small compartments for different tools.

[@interlinkknight]

But what about it? I feel I could not say much about it. Cut the material the right size you want and glue it

[@aleksandarlazarevic95]

Okay , I was interedsted which material and glue you used.

[@interlinkknight]

I put all that in the description

[@BurnOmatic]

we need an instructable on how to make that toolbox , i see you have an instructable page :D

[@lasersbee]

If I made a video of all MY tools... It would be hours long....;-)
BTW... Logan is a BOT...

[@interlinkknight]

:)