@@StupidBlokeStupidVideos I'm liking it so far, I got one in white so I've called it the Zanussi as it looks like a kitchen appliance. Took it on its first proper spin cycle on the M25 today 🤣 Looking forward to trying out the wobbly gearstick fix you kindly posted a while back, might get the short-shifter mod as well 👍👍👍
Oh yeh, also took out the injectors and cleaned them with my injector tester attached, and the spray pattern is now good. Still has the Lumpy tick-over virus.
@@StupidBlokeStupidVideos yes! weeks ago in my 107 just fittet succsessfully an shifter from ebay, no more wobble, super stiff! :) my mechanics says took him a good hour to install.
3.05 So, what if you, instead of installing the short shifter, had released the original shifter and fastened it with a screw and nut in the middle hole or the second hole if the pin got in the way?
Good job, m8 But I'm wondering what that puck/disk round metal thingy on the quick shifter is for The manufacturer could have avoided putting it, right? Eager to know, thanks.
@@StupidBlokeStupidVideos Sorry, as an engineer, I don't think it serves any balanced weight ratio when the plate itself is fastened down tightly with two screws to the main plate. One could easily avoid using by moving the hook up to one of the other holes and fasten it with a long screw and bolt. I'll try it and let you know. I honestly don't think c1 or aygo are designed by Space X engineers 🤣🤣🤣
@@basba_qal 😂 fair enough. Actually looking at it, it’s probably more to give it a bit more inertia and give a better feel as it goes into gear. It’s attached to a part of the gearbox that moves.
It will fit on all of the manual 1.0 from what I can tell. The Aygo, 107 and mk1 c1 definitely and I believe it fits all the mk2 1.0 models but best off checking with the seller. It should be easy to check though just make sure the gear selector on the top of the box looks like mine, with the 2 homes for the bolts
Still having bloody problems with the Lumpy tick-over. Stays at 850-900 RPM, no erratic idling, just lumpy as hell. Swapped out the throttle body and still doing it! Swapped over the idle control valve, still doing it. I think It's been invaded by the Lumpy tickover virus.
Is this something that has started all of a sudden? I mean, these shitters are pretty lumpy as standard on tickover. Mine feels really lumpy since I sikoflex’d the gearbox mount, so maybe one of your engine mounts is shagged and exaggerating the vibration?
Also if it’s worse when hot, it could be worth checking the valve clearances as they are shimmed on these. Tight valves could cause lumpy idle, and worse when hot however I’ve never heard of them going out of spec personally
If the shifting is hard, this won’t help. It makes the shifting shorter but also makes it a bit harder. If your shifting is hard then your clutch may need adjusting.
This mod is only in the uk But can you messure the shortshifting plate.. Maybe some one in the netherlands can make this for me I do it in combination with a 108 shift mechanism. They are better than the origininal ones from 107 c1 etc
Just when I think you couldn’t possibly make the “shitter” even better and more AWSUM! In my best American accent, you just manage to improve and keep the dream alive that we could all one day possibly own a shitroen C1. Obviously not up to your highly improved specs tho sir Tim!!! Keep up the good work sir 😂😂
Brilliant video! Is shifting any harder? Do you think it could wear faster gear links or something? I’m probably willing to give this mod to my racing groceries nugget too
Thanks mate. It’s slightly stiffer but not to any detriment. It feels way way more positive. It will be pulling on the cables slightly harder but I doubt it will be by enough to cause any negative effects though. I’m actually really impressed with it.
@@dizzy2020 they’re probably no worse than anything else for rust, but because mechanically they are much bullet proof,.. it’s usually rust that finally finishes them off!
I’ve no link cos the one I bought is sold out, but,.. if you just do an eBay search for either 107, c1 or Aygo short shifter some others come up. If it looks the same then it’s probably the right one. Mention this video to the seller in the comments when buying it 🤣
This is the link to the one I bought but sometimes shows as out of stock. www.ebay.co.uk/itm/404256846965?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=nglbtiieriw&sssrc=2349624&ssuid=B24T_G0JTKS&var=&widget_ver=artemis&media=COPY
Now you can shift faster will you have time to "Double clutch like you should"? Hahaha 😆 What's next? A hunky shot of N²O? A spoon engine? Or a set of glow plugs in a 3 series?🤔 Hahaha
Hi Great video :) Is it the only modification that have been made to gearbox or there is also that one at the same time ? ua-cam.com/users/shorts-YosVfhx_JY Both at once or only Short Shifter?
I got an Aygo recently and I'm addicted to your videos now, brilliant stuff mate
Sweet, they’re great little cars aren’t they!
Also, thanks for watching 🙃
@@StupidBlokeStupidVideos I'm liking it so far, I got one in white so I've called it the Zanussi as it looks like a kitchen appliance. Took it on its first proper spin cycle on the M25 today 🤣
Looking forward to trying out the wobbly gearstick fix you kindly posted a while back, might get the short-shifter mod as well 👍👍👍
@@8bitnitwit it’s a actually good bodge that one!
Oh yeh, also took out the injectors and cleaned them with my injector tester attached, and the spray pattern is now good. Still has the Lumpy tick-over virus.
I’d love one of these but I don’t have a back-to-front baseball cap and a pair of Burberry socks.
Will it still work?
It will still work, but will unfortunately loose a small amount of its effectiveness.
Underpants necessary of course , brown ones :)
Awesome, nice job, just what I need 😎
£35 on eBay! Mention to the seller you saw it here first 😆
hey, can you install a mk2 gearshift from an aygo? should fit in
Yes I believe it fits straight in 🤔
@@StupidBlokeStupidVideos yes! weeks ago in my 107 just fittet succsessfully an shifter from ebay, no more wobble, super stiff! :)
my mechanics says took him a good hour to install.
Do you have a video what you have done to the dash? Like the alacantara stuff? Thanks!
I do. Its a flocking kit. If I was to do it again I’d do it on a cooler day
ua-cam.com/video/xhiauBsBMWI/v-deo.html
3.05
So, what if you, instead of installing the short shifter, had released the original shifter and fastened it with a screw and nut in the middle hole or the second hole if the pin got in the way?
Maybe, but for £35 the shifter works well tbh
Cool mod that must give you at least 3.1 mph great channel great content 👍
I’m impressed with it, and thanks mate
Where did you buy that genius shifter knob? Amazing!
It was on the car when I got the shitter, but came from eBay I believe
Hi there can you advise. Having trouble selecting all gears do you think clutch
@@mgzs100 if it goes into gear ok when the engine isn’t running, then check the adjustment of the clutch.
Dont suppose you have a video on how to adjust clutch cable
Good job, m8
But I'm wondering what that puck/disk round metal thingy on the quick shifter is for
The manufacturer could have avoided putting it, right?
Eager to know, thanks.
Thanks mate. It’s some king of weight/counter balance.
@@StupidBlokeStupidVideos Sorry, as an engineer, I don't think it serves any balanced weight ratio when the plate itself is fastened down tightly with two screws to the main plate.
One could easily avoid using by moving the hook up to one of the other holes and fasten it with a long screw and bolt.
I'll try it and let you know.
I honestly don't think c1 or aygo are designed by Space X engineers
🤣🤣🤣
@@basba_qal 😂 fair enough. Actually looking at it, it’s probably more to give it a bit more inertia and give a better feel as it goes into gear. It’s attached to a part of the gearbox that moves.
WOW. Does it require any additional modification of a gear box or a clutch ?
Nah, fits straight on
Hi mate, what should I do if I've lost the pin for the gear selector?
The securing clip? Just get a new one, or failing that an R clip to fit, or even a split pin will secure it
Bueno, what cars does that kit fit on ?? Was that specific for the shitrron ?
It will fit on all of the manual 1.0 from what I can tell. The Aygo, 107 and mk1 c1 definitely and I believe it fits all the mk2 1.0 models but best off checking with the seller. It should be easy to check though just make sure the gear selector on the top of the box looks like mine, with the 2 homes for the bolts
Still having bloody problems with the Lumpy tick-over. Stays at 850-900 RPM, no erratic idling, just lumpy as hell.
Swapped out the throttle body and still doing it! Swapped over the idle control valve, still doing it. I think It's been invaded by the Lumpy tickover virus.
Is this something that has started all of a sudden? I mean, these shitters are pretty lumpy as standard on tickover. Mine feels really lumpy since I sikoflex’d the gearbox mount, so maybe one of your engine mounts is shagged and exaggerating the vibration?
Also if it’s worse when hot, it could be worth checking the valve clearances as they are shimmed on these. Tight valves could cause lumpy idle, and worse when hot however I’ve never heard of them going out of spec personally
Is that round thing like a counterweight or something? it could be way smaller. I’m not from the uk so shipping ain’t worth it. Could a homemade work?
@@RH-oq9yx I think it is yea. No reason why a home made version shouldn’t work. Have a go and let us know how you get on!
@@StupidBlokeStupidVideos il give it a try. thank your for your work really useful and entertaining!
@@RH-oq9yx let us know how you get on!
I watched it with wine and thoroughly enjoyed this video.......hic 🍷
The more wine you drink, the better the video becomes.
@@StupidBlokeStupidVideos i know........i need 2 bottles when you do a video of that silly E45 🤣🤣
Whats on the other end of the short shit kit, Is that a pulley or some sort of balance weight ?
It’s a weight. Think it’s to make the gear selections perfectly balanced, because racecar
@@StupidBlokeStupidVideos nascar / f1 /any rally ....
Can you tell the sizes, so i can try making one at home? thx
Not without taking it back off, tbh they’re only £35 it’s probably not worth the hassle of making one.
Im facing hard in shifting is it work for my 2021 aygo?
If the shifting is hard, this won’t help. It makes the shifting shorter but also makes it a bit harder. If your shifting is hard then your clutch may need adjusting.
Have you tried cutting an inch or two off the generous length?
Im pretty sure that’s what happened during my circumcision…
Does it fit in the new C1 ?
@@mattialaurigi9597 if it’s a 1.0 I believe so, but if it’s a 1.2 then no
This mod is only in the uk
But can you messure the shortshifting plate..
Maybe some one in the netherlands can make this for me
I do it in combination with a 108 shift mechanism.
They are better than the origininal ones from 107 c1 etc
Will UK sellers not post to Netherlands? It would probably be easier and cheaper to do that than to have one made from scratch tbh
@@StupidBlokeStupidVideos The only one i have found 42 pounds (48 euro 37 euro shipping and some tax
@@HermanVdMeer I’ll see what I can do
@@StupidBlokeStupidVideos thanx
Cool vid as usual
Thanks mate!
Yes!
YES
Just when I think you couldn’t possibly make the “shitter” even better and more AWSUM! In my best American accent, you just manage to improve and keep the dream alive that we could all one day possibly own a shitroen C1.
Obviously not up to your highly improved specs tho sir Tim!!! Keep up the good work sir 😂😂
Do well at school and work hard, and one day you too could own a Shitroen C1!
@@StupidBlokeStupidVideos thank you for words of inspiration! Brilliant video m8 look forward to next weeks episode, stay safe Tim
Hi, i want to build one 😊, can you make a template ? 😅
They’re only £35, probably cheaper just to buy one tbh lol
Would I be right in assuming this would be the same fit on the MK2 Aygo mate? I'm tempted tbh 😂
If it’s the 1.0 then I think so yea. Not the 1.2 though
@@StupidBlokeStupidVideos yeah good old brute force 1 litre here mate! 😂 keep up the videos!! 💪
@@MJ-85 should fit then, and thanks mate
Brilliant video! Is shifting any harder? Do you think it could wear faster gear links or something? I’m probably willing to give this mod to my racing groceries nugget too
Thanks mate. It’s slightly stiffer but not to any detriment. It feels way way more positive. It will be pulling on the cables slightly harder but I doubt it will be by enough to cause any negative effects though. I’m actually really impressed with it.
I wonder why they didn’t make it like this straight out of the factory already 😠, now I want this mod ehehe 😁
@@dizzy2020 no such a thing as rust in my country, 12 year old bug spotless (not british myself)
@@dizzy2020 they’re probably no worse than anything else for rust, but because mechanically they are much bullet proof,.. it’s usually rust that finally finishes them off!
@@matt91eoo I’m jealous.
Quarter mile legend now :P
It does a 1/4 in the tens now.
About 10 mins and 27 seconds.
@@StupidBlokeStupidVideos rip the exhaust off , will sound better going slower !
link of this magnificent product? great video as always, cheers from italy😊
I’ve no link cos the one I bought is sold out, but,.. if you just do an eBay search for either 107, c1 or Aygo short shifter some others come up. If it looks the same then it’s probably the right one.
Mention this video to the seller in the comments when buying it 🤣
This is the link to the one I bought but sometimes shows as out of stock.
www.ebay.co.uk/itm/404256846965?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=nglbtiieriw&sssrc=2349624&ssuid=B24T_G0JTKS&var=&widget_ver=artemis&media=COPY
@@StupidBlokeStupidVideos thank you man, i will try to buy it as soon as possible because now it shows “only one item left” for no reason whatsoever
@@tommi5033 the seller has sent me a website that can be gotten from a little cheaper too if this helps
etlproducts.co.uk
English is not my native language,
But - Thats The dogs bollocks 😎
Your English is still probably better than mine, and thanks 😊
Turned my bag of shit into a bit less of a bag of shit thanks to your videos! thanks pal
@@adamfirth4199 that’s that nicest thing anyone’s ever said to me 🤣
You made ‘short’ work of that. Sorry 😂
I see what you did there 👌
Get it to santa pod
Would tear up the tarmac too badly.
True 😂😂😂😂
😀
He cut the knob off ... ah no ,,, I thought it was going to get emasculated.
Of course its faster ,,, its 35 quid faster.
£35 faster in a £35 car, that’s twice as fast!
@@StupidBlokeStupidVideos win win ,,,,
Great mod. But not as cools as a scoop and a pair of vents....
They’re on the list 😆
Now you can shift faster will you have time to "Double clutch like you should"? Hahaha 😆
What's next? A hunky shot of N²O? A spoon engine? Or a set of glow plugs in a 3 series?🤔 Hahaha
I’ll have 100k under the hoooood soon 😆
@@StupidBlokeStupidVideos it'll be like Elonore's ugly sister 🤣🚙 Hahaha
Hi
Great video :)
Is it the only modification that have been made to gearbox or there is also that one at the same time ?
ua-cam.com/users/shorts-YosVfhx_JY
Both at once or only Short Shifter?
The one in the link is more a repair than a modification. I did that to this car about 2 years ago too though
@@StupidBlokeStupidVideos *Noice*
0:54 haha
🤣
great mod,more time to spend picking your nose
The left nostril at least
BS
Big sausages?