M1087 FMTV Shelter Swap instead of New Build Expedition Truck Upgrade
Вставка
- Опубліковано 20 вер 2024
- Instead of selling our first build and starting over, we decided to swap shelters instead. Repurposing a military truck made this relatively easy, they are designed for this. (we could even set the shelter on the ground if we ever decide to stop being mobile.) We've been very happy with our shelter and the design, this saves us a year of building and we have a newer truck. It's a bit crazy to see your house lifted up and hanging in the air. We plan to do a little bit of remodeling now that we have more space, we will be sure to share that with you when we get to it. Thanks for watching, commenting and subscribing!
This turned out a bit longer than usual. Here is a breakdown in case you’d like to FF.
Intro & explanation
:29 Prepping; Opening up the slide-out mechanisms, fixing a rivet nut, and looking at how the box is attached.
10:13 - Heading to a local machine shop to make the switch
11:17 - Desert Sand Bantha - shelter removed
14:11 - Camo Bantha - removing shelter
17:38 - Desert Sand Bantha - placing built out, camo shelter
19:41 - Camo Bantha - “attempting” to place built-out, camo shelter - There is an issue.
23:03 - The issue is explained & solution
29:15 - Let’s try it again. Camo Bantha - placing stock shelter on
It worked! Off we go, looking like a kid with mismatched socks.
Thanks for sticking with us!
Definitely a wise choice to use this facility rather than a boom crane. Much easier to get it properly located with that double gantry set up
That was much faster then I thought it would be. I know you have to put all the under side boxes back on. But it looks like it went smooth.
We were impressed, it could've been done even faster had we known about the need to make a cut. 🍻
Good job.
That's rad! Does the new truck have 4 or 5 leaf springs in the rear? Nice work
Don't know what a rivet nut is ?? Nothing I have heard
Where are you even finding these, ive seen only one go up for auction in the past two years.
Yes, they are pretty hard to get your hands on. As far as we know, only 5 in civilian possession so far. Rumors of a 6th one out there somewhere.
you got a link to video or write up to why you decided to swap boxes? Am sure their is logical reasons.. curious what they are.
No, should've added that. Sorry. Will work on that and notify you when we share it.
For now, the short answer is: We thought it would be fun to build another one. This box offers massive space, but with that comes design challenges, the way it folds and unfolds. After living in this one for 3+years we have some ideas and maybe a couple things we'd change. BUT...the supply chain issues we'd face right now just didn't seem like a good idea. We know how much money we sank into the first build, it would be 3X that now. We had purchased the newer rig and this way we feel like we have the best of both worlds and barely any interruptions in our adventures.
@@BANTHA-M1087FMTV mucho gracious for explanation.
From what I can see, there are 4 hardmounted attachment points (no compliance/spring mount) and the box also rests on the frame rails?
Hi, yes, you are correct. Thanks for watching!
Curious if there will be a new paint scheme coming?
Will the new owner be publishing on his build?
Easiest system up grade. Lol
Yes - there IS a new paint scheme coming for BANTHA, and an updated logo. Yes - the new owner will be publishing their build, we can't wait to see it! Seriously, we just saved ourselves an entire year of building. We are super happy with the decision. 🍻