How to Build a Harley-Davidson Sportster Cafe Racer on a Budget- Part 1 Look and Feel
Вставка
- Опубліковано 6 сер 2024
- J&P Cycles walks you through the process of How to Build a Harley-Davidson Sportster Cafe Racer on a Budget.
Check out the parts we used to build our Cafe Racer below:
Burly Brand Vinyl Café Tail Section
J&P Cycles Part Number: 713-058
www.jpcycles.com/product/713-...
Progressive Suspension 412 Black 13" Shocks
J&P Cycles Part Number: 701-751
www.jpcycles.com/product/701-...
Biltwell Inc. Mushman Black Footpegs
J&P Cycles Part Number: 634-883
www.jpcycles.com/product/634-...
Roland Sands Design LED Indicator Lights
J&P Cycles Part Number: 306-923
www.jpcycles.com/product/306-...
Roland Sands Design Black Ops Cafe Gauge/Headlight Relocator
J&P Cycles Part Number: 633-415
www.jpcycles.com/product/633-...
Cyron 5-3/4″ LED Black Headlight
J&P Cycles Part Number: 754-611
www.jpcycles.com/product/754-...
odi Grips Vans Black Grips
J&P Cycles Part Number: 240-2148
www.jpcycles.com/product/240-...
Biltwell Inc. Slimline Shorty Black 1" Risers for 1" Handlebars
J&P Cycles Part Number: 503-922
www.jpcycles.com/product/503-...
Biltwell Inc. 1" Black 0" Zero Drag Handlebar
J&P Cycles Part Number: 712-724
www.jpcycles.com/product/712-...
Roland Sands Design 1" Black 0" Clip-on 39mm Handlebar
J&P Cycles Part Number: 503-495
www.jpcycles.com/product/503-...
TC Bros. Choppers Stop Bobber Side Mount Tail Light/License Plate Bracket
J&P Cycles Part Number: 755-670
www.jpcycles.com/product/755-...
Drag Specialties Black LED Handlebar Marker Lights with Smoke Lens
J&P Cycles Part Number: 200-6238
www.jpcycles.com/product/200-...
Todd’s Cycle Right Black Shooter Mirror
J&P Cycles Part Number: 752-253
www.jpcycles.com/product/752-... - Авто та транспорт
You explain everything you do, and WHY - brilliant! Fantastic learning experience… Thank you! 🙏
Nice, but soldering wires means not rub some tin on with a hot solder iron.......heat the both materials with the solder iron and then put some tin on and let it flow.....use tin with flux added.....just a tip...
In America, we think of a cafe as something like a Starbucks or Panera. A quiet, low-key coffee shop type atmosphere. In the UK in this particular context, a "cafe" was a truck stop/diner. Bacon, eggs, toast, tea (Brits LOVE their tea) and hash would be slung. A ubiquitous jukebox present where that vile Rock n Roll would be blaring away. A rougher, blue collar ambience would be what you'd experience.
Oh, and hate that phrase "before we get started." JUST GET STARTED, DAMMIT!
historically harley had nothing to do with the cafe category, but, Ironically looking at these concept today, its such a beautiful combination, good work. You must have inspired a lot people out there!
Fantastic. This is what I want! Exactly. THX
I Love the look.
"We're not just gonna throw a bunch of expensive parts on this bike and call it a day."
Proceeds to throw a bunch of parts on the bike.
"-but we're going to show you how to do it on a budget. For just an extra 3,000-4,000$ we can make this bike look fantastic"
“To help keep everything dot legal”
Hides plate in front of rear tire
@@Pharryn It isn’t - just obscured in the video for privacy…
Quit whining… No new forks, wheels, brakes, speedo, or tranny changes. What he did was simple, took a few days, made it look much better, and doubled his investment.
@@gregwein1 😂👍
a set of bars and a seat doesn’t “double his investment”
Grow up fanboy
I have the exact same bike . That's cool. I have a cafe 2 up seat but very similar bikes.
Thanks had no idea I could do it on a budget
excellent!
So the taillights just sit under the seat, getting covered in road grime? Maybe I'm nit-picking, but, if you're going to cut the frame, weld up a loop and mount a small mudguard..
Thank you
See more at Countersteer. www.jpcycles.com/countersteer?How_to_Build_a_Harley_Davidson_Sportster_Cafe_Racer_on_a_Budget__Part_1_Look_and_Feel&Dx2YktSdi8E
I'm wanting to do this to my 07 sportster 1200 custom
спасибо за канал, ребята. Вы молодцы
Was hoping to see those front turn signals...
Thanks for the vid. Google must know something because I have the front end parts at home waiting to get installed. The only thing is that I currently have drag bars and I'm gonna try clip-ons. Hoping I can tolerate the riding position... I bought integral bar end mirrors but I'm worried they'll hang out too far and will be blocked by my wrist. Like your tip on the turns & mirror but I didn't catch the name of the mirrors! Who's were they?
Can you please tell me where as in a link for the handlebar risers/mounts. Can’t use my bars with stock mounting plates :/
I couldn't do it to 100th anniversary! But it's cool
Little late but, what where the brake cables you put on it? running into the same issue with my build?
I really want to chop my rear fender, but need to keep riding 2 up. Any seat out there that can offer this for a sporty !?
Are there any good rear set foot controls you can reccomend? I have a 98 sportster
Where is the link for the brake lines you replaced?
Random.. what did you use to bleed the brakes? that looked alot easier than how i do it!
Hi mate. I know this vid was made a fair while ago but I am looking for the instrument panel that you chopped out of your build of this cafe racer. Would you have that for sale still? I am in Australia and have a 2005 Roadster.
Be warned this setup does not give you full range of motion on most sportsters! Like other people have noted here, 1" risers with the zero drag bar will cause the controls to hit the gas tank. Bought the exact same parts, and it seems people here and Reddit are all having the same issue.
@Isaac Wolf what size risers did you end up using?
You need to learn how to solder electrics boyo.
Can you please send me the link you where you got your seat I can’t find one!!!!
thx for the vid. Constructive tip: instead of soldering try crimp on bullet connectors.
that license plate placement will absolutely get you pulled over
I just bought a 2016 roadster and put 1 inch longer shocks on the back....done .
For anyone watching this in 2023, know there are better ways to splice wires. Tip 1: Don't use the crimp-on junk they sell at Home Depot or the auto parts store, and don't do it the way the guy in the video did. Take five minutes to learn how to solder properly, or use the new solderless splices that let you easily take things apart later if you need to swap something out. Use a proper wire stripper. Tip 2: Take the fuel tank off, wrap it in something soft, and put it in a box out of the way. Gives more room to work and one less thing to drop a wrench on. Ditto the front fender. Tip 3: Don't hide your brake light, turn signals or license plate- being "too cool for school" will get you fined or killed- these are safety items. Every driver who ran over a biker says the same thing: "I didn't see him." Tip 4: Cutting your frame for ANY reason will not increase the value of the bike; find a seat that works with the stock frame. Or make one. My brother made his own custom cafe seats for less than $20-worth of fibreglass for the custom base (drape Saran Wrap over your bike's frame to protect it while laying up the fibreglass), foam from a dead seat, and marine vinyl. If you know anyone who can sew, cut the seat cover in two pieces (e.g., top/side) and have them run piping around the joint. The cover will follow tight contours better and look professional. Tip 5: Drop the front end an inch or so in the triple trees. It's a free mod to level out the bike and give it a better stance. Tip 6: Clip-ons (with or without risers depending on your arm length and spine durability) will work better than a flat bar. Infinitely adjustable to avoid the dread tank slapper/hand crusher. Tip 7 (more advanced): As an option to #5 and #6, find a complete, used sport bike fork and wheel assembly with brakes and controls. These can be found cheaply, and will provide far superior adjustable front suspension, better twin disk braking, and a 17" tire instead of the Harley's stock 19". Tip 8: Buy used stuff wherever you can. Harley guys are always swapping exhausts and other performance bits and you'll pay a fraction of new. Tip 9: If mounting a single-wall exhaust, wrap it with some quality exhaust wrap- it improves performance and your skin will thank you later.
👌🔥
Shocking soldering. No flow of flux - dry joint city. Expected better from J and P cycles. Some anti seize on the fasteners would help too.
Peter Bonehill my favorite was him pulling on the wires with side cutters to strip the insulation.
agreed a good solder joint takes one second to do flux and heat allow flow
AS SOON AS I saw him "painting" on solder I had to rush down to the comments to see who else saw that. Unbelievable.
Get a set of wire strippers damn
Proceeds to list all major name brands. Good buy though
That music is awful I mean really bad it literally is giving me a headache.
I love the look but that brake light turn signal license plate is just begging to get pulled over here in SC.
Love the pegs too
Lose the music
This is almost as bad as the Verge's PC build......
My dude, you built a Dragger.. not a Cafe bike...
I'll rant more on the 2nd video...
That bike is definitely not a drag bike....this is - ua-cam.com/video/6tzitnqNaCk/v-deo.html
Great vid, minus the 2010’s millennial music
that wiring job made me cringe.
Those old stock BUCK HORN bars are by far the ugliest and the most ergonomically incorrect bars that Harley has ever made and actually put on thier sportsters ! Just by only removing them made it look better !
Lol. I’m looking for a pair to put on mine
I seriously disliked them forever, but now think they're pretty cool on some motorcycles. I guess it depends on the style that you're after. Cafe?- no.
please do not let this dude solder anything ever again! wow that hurt to watch. fail
Ruined that bike.
Music sucks.