Compressor Kia Sedona 2003

Поділитися
Вставка
  • Опубліковано 13 гру 2024

КОМЕНТАРІ • 20

  • @LDSXena79
    @LDSXena79 11 років тому +2

    Thanks for the video! I actually need to access the alternator and this gave me an idea how to access it easier than what I was trying! :)

    • @BigAlWillis
      @BigAlWillis 5 років тому

      you go girl

    • @joeyjonson6017
      @joeyjonson6017 5 років тому

      I wouldn't use this video to do anything with. This guy is absolutely clueless about the entire procedure.

    • @joeyjonson6017
      @joeyjonson6017 5 років тому

      This doesn't rise to the level of a DIY PROJECT. Its more like a FIUY Project.

    • @magaritagarcia1943
      @magaritagarcia1943 4 роки тому

      ¹qqm0,

  • @Angeleoclan
    @Angeleoclan 8 років тому +1

    I was looking on how to tighten the belt for KIA Sedona 2003 and found your video. Thank you on pointing out where the tension pulley and how to loosen or tighten it. You must have had your compressor discharged of refrigerant otherwise it's a no no to open like it so...

  • @veronicadavis2911
    @veronicadavis2911 6 років тому

    Are you referring to the radiator fans?

  • @TheWardog569
    @TheWardog569 11 років тому +3

    Mine was a freakn nightmare to replace. 04 kia sedona.

    • @BigAlWillis
      @BigAlWillis 5 років тому +1

      would be easier to put it on jack stands remove right front tire & get to a lot of it right there.

  • @joeyjonson6017
    @joeyjonson6017 5 років тому +1

    The AC hoses won't interchange. You don't have a clue what you are doing. The AC compressor should never stay open it is absorbing moisture and abrasives from dust in the air.

  • @jwin998
    @jwin998 4 роки тому +1

    DO NOT FOLLOW THIS! THIS IS WAY MORE WORK THAN NEEDED! You can remove this by loosening from the bottom! Then remove the pulley from the tensioner pulley and take the 3 bolts off the bracket that holds on the idler pulley in between the alternator and ac compressor and you can remove from the side of the car! No need to remove fans and electrical and all that! This dude has Zero understanding of how this works!

  • @Sea2Skyward
    @Sea2Skyward 10 років тому

    How much was the new one and what wrenches did you need to use ? Sooo overwelming

  • @Colin-Fenix
    @Colin-Fenix 2 роки тому

    Sorry, I'm more confused after this video than I was before watching it... Maybe you should practice a few times before loading up a video.

  • @joeyjonson6017
    @joeyjonson6017 5 років тому +1

    You don't have to Mark the plugs. They #1 won't reach somewhere they don't belong#2 they won't plug up somewhere they aren't supposed to. Why are you uploading a tutorial on how to do something you don't know how to do?

  • @johnbyrne4438
    @johnbyrne4438 3 роки тому

    Sir, you should be wearing gloves. Really.

  • @stumpmtsr
    @stumpmtsr 11 років тому

    Nice...need this video.

  • @Abit.ofeverything26
    @Abit.ofeverything26 7 років тому

    ooooo nooo I put the oil in the right side

  • @Abit.ofeverything26
    @Abit.ofeverything26 7 років тому

    ooooo nooo I put the oil in the right side this is a bad news

    • @joeyjonson6017
      @joeyjonson6017 5 років тому +1

      Disregard whatever this guy says . Whatever is on one side is on both sides. What u can't do is install the oil on the high side once it is pressurized. Your compressor is fine.

  • @joeyjonson6017
    @joeyjonson6017 5 років тому

    I see what don't have a clue wtf you are doing.