Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
Thank you for sharing the technique on how to bend 1/2 conduits! This is exactly what I was looking for.
Excellent, I'm glad it was helpful!
Will it wok on 3/4 EMT?
I haven’t tried it with 3/4, but it may be a bit more difficult to bend.
Very useful tip for bending pipe, Greg.
Thanks! I figured it might be handy to know that.
Thanks for this - great timing and you are so clear with your process!
You’re welcome, and thank you!
Love the pipe bending for hoops. Pipe more firm then pvc I use.
It is, it should last a long time and it’s about the same cost as PVC.
Good idea.👍
You might try turning the pipe around at 1/2 way and bending the other side might help with quality.
Yes, that would probably improve the symmetry of the finished hoops.
What size is the rebar you used? I see the conduit is 1/2in. Does rebar comes smaller than 1/2in? Thanks so much.
It’s 3/8 in. rebar, so just small enough to fit snugly inside the conduit.
Might it not be better to make quarter circles then join with a T joint allowing a cross bar between hoops at the top ?
You could do that, too, for better stability.
Or just lash another pipe to the half circles as a “perlin”.
What diameter and thickness is this pipe?
It’s sold as 1/2 (half) inch electrical conduit, at least in the US. A metric equivalent might be 13mm
Thanks for the share...anyone ever ask you who was buried in your back yard? 😳😆
Haha not yet! They make great Halloween decorations. 😁
Thank you for sharing the technique on how to bend 1/2 conduits! This is exactly what I was looking for.
Excellent, I'm glad it was helpful!
Will it wok on 3/4 EMT?
I haven’t tried it with 3/4, but it may be a bit more difficult to bend.
Very useful tip for bending pipe, Greg.
Thanks! I figured it might be handy to know that.
Thanks for this - great timing and you are so clear with your process!
You’re welcome, and thank you!
Love the pipe bending for hoops. Pipe more firm then pvc I use.
It is, it should last a long time and it’s about the same cost as PVC.
Good idea.👍
You might try turning the pipe around at 1/2 way and bending the other side might help with quality.
Yes, that would probably improve the symmetry of the finished hoops.
What size is the rebar you used? I see the conduit is 1/2in. Does rebar comes smaller than 1/2in? Thanks so much.
It’s 3/8 in. rebar, so just small enough to fit snugly inside the conduit.
Might it not be better to make quarter circles then join with a T joint allowing a cross bar between hoops at the top ?
You could do that, too, for better stability.
Or just lash another pipe to the half circles as a “perlin”.
What diameter and thickness is this pipe?
It’s sold as 1/2 (half) inch electrical conduit, at least in the US. A metric equivalent might be 13mm
Thanks for the share...anyone ever ask you who was buried in your back yard? 😳😆
Haha not yet! They make great Halloween decorations. 😁