Teacher, after I connected onpc, there are 16 lamps and 8 dim shutters can't be closed. Always white light. May I ask the teacher how to solve it. Am I not choosing the right mode when editing the library? 老师，我在onpc上配接后，有16个灯具，有8个dim的光闸是关闭不到的。一直常亮白光。请问老师怎么解决。是我在编辑灯库时没有选对模式吗！
The issue is likely with the "alpha mix" control channel. it must be set to dmx value 0 to allow the original color of the cue to come through. It is also possible you are using a cue which is white. If using a cue which is white, you must set the alpha mix channel to 100%, then set thevalues in the Red, Green, and Blue color channels.
I have a full board console from high end and 6 FB4 3000, do I need something else or do I need another thing or just connect the lasers to my dp output ?
Please check out the tutorials on this page : wiki.pangolin.com/hardware:fb4 This should cover it. Contact us on support [at] pangolin [dot] com if there are remaining questions!
you can use any console that you can build a fixture profile for based of the 39 control channels available over artnet for the FB4. I am using onyx, just finally got it all running and it's really really awesome.
Every frame needs to be rendered before it's uploaded to the Card. This is the reason we deliver the pre-made content packs.. To give you a jump start.
Thanks pangolin for new update... I'm also Kvant Atom 20w users.. Thanks one more time pangolin team, Hope Justin seen my comments.
great job
Good job bro
Can you give a step by step for a ChamSys?
We have a 5 part tutorial on Chamsys on our wiki : wiki.pangolin.com/doku.php?id=beyond:video#beyond_dmx
Does it work on MA3D???
No
Is it possible to integrate FB4/Quickshow through Capture and Xlerate to build shows offline?
Capture can visualize BEYOND advanced and up. You do need BEYOND advanced or better for that.
@@PangolinSystems Thanks, but that's way more than we need.
This video dont explain exatly how to connect . How can I setting by artnet protocol?
In this case the Art-net signal is send by a Grand-MA console running MA2
Teacher, after I connected onpc, there are 16 lamps and 8 dim shutters can't be closed. Always white light. May I ask the teacher how to solve it. Am I not choosing the right mode when editing the library?
老师，我在onpc上配接后，有16个灯具，有8个dim的光闸是关闭不到的。一直常亮白光。请问老师怎么解决。是我在编辑灯库时没有选对模式吗！
The issue is likely with the "alpha mix" control channel. it must be set to dmx value 0 to allow the original color of the cue to come through. It is also possible you are using a cue which is white. If using a cue which is white, you must set the alpha mix channel to 100%, then set thevalues in the Red, Green, and Blue color channels.
So it is not working using Avolite ? I got no laser output....
We have fully functional setups with Avo. Maybe contact us on support at pangolin dot com, so we can help you further.
I have a full board console from high end and 6 FB4 3000, do I need something else or do I need another thing or just connect the lasers to my dp output ?
Please check out the tutorials on this page :
wiki.pangolin.com/hardware:fb4 This should cover it. Contact us on support [at] pangolin [dot] com if there are remaining questions!
must use MA console or other console also is ok ?
you can use any console that you can build a fixture profile for based of the 39 control channels available over artnet for the FB4. I am using onyx, just finally got it all running and it's really really awesome.
MA lighting controller Ko apple tab se connect kar sakte he kya
FB4 lasers work over Ethernet Network
Has anyone found that the setup works but the second I go to player the lasers won't output
Please contact us on support@pangolin.com so we can help you further.
@@PangolinSystems I found the issue thank you, it was that the lasers needed to be set to static to be output.
@@rednax8202like the lasers themselves or the fb4s? I was experiencing this issue with a friends Chinese ilda laser and external fb4
ummm…. More than "How to control laser from a lighting console" it must be "How to control Pangolin FB4 from a Grand MA lighting console"
How to control BEYOND from a light console : wiki.pangolin.com/beyond:video:dmx_tutorial_part_2
Why does my export take forever ... it goes super slow.
Every frame needs to be rendered before it's uploaded to the Card. This is the reason we deliver the pre-made content packs.. To give you a jump start.