Making Piston Rings. (See "Piston Rings 2" for the results of this experiment)
Вставка
- Опубліковано 1 гру 2024
- Instagram: mr_crispin
In this video I discuss and demonstrate various methods related to the manufacture of simple Cast Iron piston rings. The piston rings shown are for my 5" Springbok which is a scaled down live steam locomotive.
I so enjoy both the machining and the quirky humor.
A wonderfully well balanced mix of technical know how and sharp wit perfectly blended.
Great video. No blaring music, no waffling, and.......I learned quite a lot! Thank You. I never knew a Myford like mine could do such precision work.
I was thinking initially that you would be using a boring bar to perform the part but I really was pleased to see trepanning, an underrated technique these days. I should have guessed that a thrifty Northerner would not turn a very handy remaining piece of stock into a big pile of scrap in the chip tray!
Hi MrCrispin, your knowledge is beyond doubt but your humor makes it even more enjoyable to watch. Thanks again!
As a fellow Yorkshireman, I believe the main reason for this wonderful method is so you don't waste the core !
Trepanning and you still have most of the iron left. Brilliant!
The less wastage the better. That'll be music to a frugal Northerner's ears.
@@howardosborne8647 This is why northerners invented multi-cylinder engines. The piston rings get smaller each time so you need more cylinders for the same power.
I thought the same thing. Great for a homeshop limited budget and everything he did could be done on a low power machine.
Great video Mr C, 48 years as a machinist and I am still learning new tricks 😎
@Ray Hathaway, here's to another 48 years of you slinging chips! There's nothing like manual machining, many moons ago I had the pleasure of visiting the JCB factory and watching the 5,000 tonne press chop through 1.5" steel for the chassis. The ground shook when the press came down and the press was embedded 30' into the factory floor but the thing that really got my juices flowing was the friction welding of the hydraulic rams. Rotating the cap against the tube under extreme pressure, very impressive.
@@joseywales3789 JCB, have five friction welding machines, four of which are Thompson brand, the company is still in business, and doing very well. Regards John.
My CNC turning instructor at the RR Apprentice school had done a stint at JCB friction welding shafts. He used to comment it was the kind of job to avoid as it was extremely boring! 2 minute cycle time and allot of loading components.
@@MrCrispinEnterprises Basic operator fare, though JCB is a very unique company to work for, very unique!. The control desk with a VDU, was always damaged from angle grinder sparks on dressing incomplete turning of the weld flash!. Their solution was to add a 10 mm polycarbonate protector.
I used to install, commission and service the Thompson machines, and even though the friction welders were down, causing production stoppages, it was a pain in the bum to get inside?.
Though, it amazes me how they build such an excellent product.
Better not say anymore.
Only 48? I beat you by 1 year!!
I watch Joe Pie & Stefan Gottswinter & This old Tony with considerable Respect, but this video just glazed the cherry that's on top.
I discovered this channel via a pro board Model Engineering forum. What a find! Clear and concise explanations of how to do stuff, combined with an excellent balance of wit and humour. I am a 66 year old newbie, and I am learning so much from you young sir! Thank you.
I am 67 years old and I learned something new today. I like your attention to detail and the way you describe the process. Nothing is getting omitted. Somebody can actually follow your process step by step. When I compare your instructions to HP network printer setup guide, you win without any questions.
I am glad you are back making videos. They are better than ever.
Well done, Sir. Not only were the trepanning and trumpet chamfering excellent ideas, but you can now sell the rest of the stock to another Yorkshireman who wants to make piston rings for smaller pistons. Bravo.
I jest, of course. Watching the way you work is an education.
Don't know whether the humour or the machining is the best.
As an engineer myself I can say thats a brilliant tutorial on how you made piston rings, never had to make piston rings myself yet but after seeing this I now have a better chance of making them if I ever need to make some.
mr Crispin, you have talent beyond your years. just brilliant.
The trumpet chamfering technique was particularly clever.
Not a machinist but watch quite a few, and this is a seriously under-rated channel. No click-baiting, dramatic intro sequence, begging for sub/'Hit the Like Button; etc, etc. Humor is unique yet not indicative of a repressed comedien yearning to break into the big time, and simply quality informative work thats explained properly without being too dumbed down nor journeyman jargon.
Subbed of course.
Thanks for your generous feedback. I'll keep trying!
Excellent video, I don't need piston rings at the moment but I am going to try each of those machining techniques. I learned alot. Thank you Mr.Crispin for your time
Sterling work as usual ! When you said you would come back to have a look before bedtime, I found myself saying "please be wearing PJ's and a dressing gown"....... I wasn't disappointed. The nightcap was a bonus. Cheers.
Hello Funny man with a hat.
Difficult to understand your English last years but today after seeing many time all your so great videos, my ears are understanding perfectly everything. For me You are in the top 10 of the world best who have help me so much since 2 years I bought my machines. Joe P and Keith R are also Kings of mécanique like you. Thank you so much from a french Old man.
Thanks very much for your kind comment. Cheers
An excellant demonstration about aii the details of piston theoretical and practical . Even a lay man can understands easily. Thanks a lot to dear demonstratrator .
Nicely thought out process! I can't think of a better approach. I particularly like your ring splitting device and the "safety nightcap"! Thanks for the video.
This is why I watch YT. I'm not going to make a steam engine or a single piston ring, I don't even possess a decent set of drill bits, but this is absolute gold, thank you for the effort you put in.
Something deep down gave me the feeling that you would be returning to check out your new springy rings in your finest sleeping attire.
Informative, educational and with a wonderful dry Yorkshire wit and humour, great presentation and thank you
I've never seen rings made in that fashion. Very interesting and nicely done.
Been machining 33 yrs. Never would've thought of trepanning those rings off to save all that stock. Excellent!
Heat treatment with a flame over a wooden bench! This is my kind of New Year’s gift. Love it. Looking forward to every step of the locomotive build.
Love the Mr Scrouge bed cap goes well with the miserly technique to minimise expensive cast iron !
Really enjoyed that.
Amazing how satisfying watching those rings break was.
Show of prepared devices in the workshop and material savings. Most importantly: exact measures for the clearance to expand within the cylinder controlled by contraction after cooling the entire assembly after heat treatment on a pre-calibrated internal base. The entire process consisted of very intelligent machining. Grateful for the video Mr. Crispin!
Extremely informative and very entertaining just loved that film thanks for posting mr crispin
Very nicely done. I have installed thousands of piston rings in my career but have never made one. Thanks for sharing.
I say mr Crispin old boy. I thoroughly enjoyed you methods of producing piston rings I was totally amazed, it was a case of well I never.
Meehanite ! Now there's a word to remember, all the way back to 1962 when I started technical college which at the age of seventeeen was the beginning of a life in Engineering, still active sixty years later. My first motor car was a Riley one and a half, RME saloon, which had a number of components made from Meehanite, brake drums, and even the cylinder block. They were very high quality cars Rileys, and the chassis was as strong as a JCB earthmover. I spent every Saturday morning greasing the abundance of nipples thus ensuring long and reliable life by preventative maintenance. I am presently designing a unique zero carbon power plant for the Isle of Man, which at sixty months contract duration will probably be my last big job. Great to meet fellow Engineers online too ! Keep the chuck turning !!!
Am I a homeshop machinist?
-Yes.
Did I learn some very effective techniques to add to my quiver?
-Yes.
Am I ever going to build a steam loco?
-No............... (not in the next 20 yrs)
Am I very grateful for another excellent Crispy vid? (and I do mean Crispy)
-Yes
Did I giggle my arse off from the trademark dry humour?
- Undoubtedly :)
Don't stop MrC, you keep me going, outside of the workshop.xx
Thank you.
The hat bit never gets old!
Clever work on these piston rings - I've come away with at least three things I might be able to put to good use one day. Thanks!
Interesting techniques, Mr Crispin. I especially like your hat boomerang tossing method to get it to land on your drill press every time!
Thanks so much for sharing.
I got to say, I discovered your channel with this video, impressed by the ingenuity and techniques used in the making of the rings !
Growing up and an automotive machine shop I absolutely loved this video and look forward to many more, thank you.
Built three locos in my days, one using the Springbok boiler. Also done cast iron rings, but your method of "cracking" the rings left me in awe..superb.
I am very impressed with the setup. I hate seeing stock wasted and you did a superb job of avoiding that. Thank you for the excellent video. Stay warm.
Thoroughly enjoyed the video and learnt a lot. I just knew you would have a matching night cap, its the attention to detail that makes these videos worth watching.
I’ve been in engineering and machining of one type or another all of my working life.
I’ ve seen this, done that, and got the T shirt, but I learn something new in every video from this guy!
Thank you for taking the time and effort to produce these educational lessons.
Thanks for your comment!
Excellent video, thanks. I was a mechanic for many years, and always liked the precision of piston rings.
Another interesting and entertaining video sir! The thought process was excellent yet again and the parts produced look fantastic. The night cap had me in stitches. I had to watch that section again to hear what you were saying. Keep on keeping on.
Thanks for sharing your skills Mr Crispin, that's one of the smartest set up I've seen on u tube, and minimal waste to your expensive piece of cast,
Excellent video, demonstrating a great technique for making piston rings. Thank you very much.
Spectacular thrift! Admirable application of logic and critical thinking. Delightful tooling. And what a lovely little fly press!
Brilliant, superb mix of how to and humour
The trumpet chamfering is Brilliant! Cheers from the u.s. 👍👍👍
Ticked several box's on my learning curve . Thanks , great video.
... Mr Crispin, I have very much enjoyed watching your videos. I believe I have watched them all, alas.. Such accuracy ! ... such precision ! I admire the geometry and the logic of the procedure. Also, the pieces you produce are quite beautiful. Thank you.
And this video demonstrates a true machinist at work 👍🏻 great stuff sir!
HI Mr Crispin, very elegant way to make the rings and the bonus of saving the material!
Rich
I learned so much from this video. Thank you
Very nice. I am enjoying your work tremendously. I am happy that you saved some of the Queen’s Ransom cast iron plus, I anticipated you returning in your PJ’s. God bless!
Really good video! I am building a 1/3 scale model of the Hemmingway Mill engine circa 1850 . The piston is 3 " x 1.250" and your video fits the bill perfectly !
I thought you were going to bore them off. A+ for trepanning them off to save material
Excellent set up saved a lot of wastage of stock doing it that way. Was on the edge of my seat when you split the rings. Enjoyed this so much 👍👍👍👍
Absolutely magical. It would be cool to see a slo-mo of that crack propagation. Great video Mr Crispin.
David Wilks will be proud of your trapaning,
8:50 was waiting for a snowball to hit the window 👍👍🏴
NIce work MrCrispin ! I like the way you do it, as well as learn and enjoy. Good jokes too, but I especially like the 'annulus riser' !
Keep on and keep well.
Brilliant mate. One of the best machine videos on you tube. Really enjoy the commentary and descriptions for accuracy. Super impressed.!!
I like your different approaches to various problems. Very informative. This channel makes me think of Keith Appleton and his channel regarding steam engines and shop practice.
"Reload" is an anagram of "Ordeal", seems fitting. Excellent techniques, when I served my apprenticeship, part of was spent working as a lathe helper, the turner showed me using the boring technique to produce finished washers, your trepanning method is far more efficient material wise.
The material was a bearing bronze, so a nice stable material.
Great vlog, thanks for sharing.
Best regards from the Black Country.
John.
Mr Crispin...very clever way of saving expensive material...i would have likely just turned that internal 1.436" cast iron into chips...but your clever idea kept that as a usable material. Very frugal!
Clever way of keeping most of the material for another job! 😉
Really enjoyed watching your problem solving process... Very well done...
Excellent approach. I pride myself on being pretty clever but hats off on the tree panning!
Great video, especially the colour coordinated jammies and night cap
Brilliant workmanship entertaining with some great British humour 🇦🇺🦘👍
A true perfectionist with no BRAGGING.
I enjoyed your economic approach to making the rings!!
LOL, up to an hours work for a normal machinists and turn it into a 5 day ordeal... I love it! well done Mr. C 🍻
Very nice. No wasting the core. Brilliant.
that's a satisfying snap when splitting. I tremendously enjoy your videos.
What's known as breaking things carefully.
MrCrispin, engaging stuff! The many challenges, failures and eventual success making reliable cast iron piston rings from bar stock for early Cummins diesel engines is notable part of the very good biography "The Diesel Odyssey of Clessie Cummins".
33:35 lol. Great video as always. Really nice to see some of us Brits in sheds on UA-cam - Good as they are (and some really are astounding video productions), our friends across the pond with their factory-sized and equipped "home shops" do sometimes get a bit carried away and seem to lose sight of demonstrating doing something as a hobby! 🇬🇧🇬🇧
Good morning Mr Crispin. I’m so glad I’ve come across your channel. I’m no engineer but a train enthusiast so this is most interesting 😄 Your skill set is second to none with fantastic humour too boot 🤣 I’m trying to catch up lol 😂 Love it cheers Stevie
The humor, the machining...this has it all!
Really like your controlled ring making process, humour and sleepgear. Your videos have a lot excellent information. Enjoy your channel.
Love how you did this. Saved a ton of material from hollowing out the middle so you've still got bar stock from the core for another project. 👍
I truly enjoyed this for both its informative value and entertainment. Thank you.
john mills aka 'douleboost' has his cammera mounted from the celling above the lathe on an flexible arm so that he does not have to work around the tripod. It allows him to put the cammera anywhere he wants. Love the videos and the dry humour!
Nice production. It was like music to my eyes. Very clever.
You are a serious machinist. Good job.
This is great, machining in a shed is my favourite thing and this making bits for a steam loco is just the cherry on the top. Ive found a new channel to subscribe to and watch, thanks Mr. Crispin!
Thanks
Very nice. And a big chunk of iron left over!
As always, a light hearted video with some very useful detail.
Friggin amazing. U R. One smart guy ingenuity galore and its the right type of ingenuity. I learned tuns of information Loved the video Thanks for being yourself
It was very generous of you to share your experiences with us. You could try another method that was told to my by my professor at the University...an avid steam man. Turn the rings oversize an split them in the normal manner with a thin milling cutter the width of which will result in the proper installed gap . Mount them individually an a mandrel the OD of which is the squeezed down inside diameter of ring and clamp them closed with a radiator hose clamp. With an end clamp plate and screw like the one you used, clamp the ring tight in the closed condition then turn the OD to the exact cylinder size. The result is the total absence of light passing the installed piston in the cylinder and a leak free condition. Yamaha had a problem with oval rings in their racing two stroke engines.
Really cool content!
First video of yours I have seen,definitely not the last!
Great video Mr Crispin! Lovely work.
Fantastic...ingenious. I learn something new every day. Wish I had a good lathe. Great video
quietest lathe on youtube i think. Nice video, and very nice work on not wasting a bunch of cast iron!
Well, there's one thing for sure you are a very talented young man, enjoyed watching this and learnt a lot, cheers 👍
I just knew you would be back in your pyjamas but I wasn't ready for the cap! First class.
loved the splitting die, very cool! and so satisfying!
Crispin, you amaze me every time. Well done my friend..good stock left over..smart..very smart.
Another winning video from Mr Crispin, some more very clever thinking (and machining) in making your piston rings. I do enjoy watching your videos on making your small gauge locomotive engine, it’s fascinating to watch how you meet and overcome the particular problem in hand. I like (as do many other people) wait for your next video and seeing the coming piece in your workshop . I wish you the very best wishes for 2021. Phil
Thanks