Great video. Music is super loud though! Thinking this might be my issue - I'm using a generic bluetooth reader and torque app for most live readouts to diagnose running rich condition. Mass airflow is reading 4.9 g/s at 900rpm , and going as high as 7.8 , assuming the values are the same as it is the same engine... that's way , way above what's expected. Will update if it works! Thanks !
Hey buddy, ive bought a bluetooth OBD2 reader and also have the Torque app, but can you explain to me how i can find the live readouts with Mass airflow etc. I cannot find it on the app, i bought the full version of the app. Also i have a C180 Kompressor 2003 Thank you in advance! Rick
Hey I wonder if you could help me: I have a a 2225 that says that there is a left fuel level sensor short circuit to positive! How can I address that? And also how do I know if my oxigen sensors conectors are well connected?
I have problem 1.99 mg/tdc more for 1 year... But maf show 8kg/h I dont know what wrong... I change kompressor, intake collector, chek with smoke intake but have no results...
I have changing spark plugs,coils,maf sensor,injectors,pressure regulator,pcv valve and still have a misfire...same engine.Can You Tell me what is the problem?
I have the same DTC error,I have changed the Mass Air Flow sensor with a new one,still my car is self accelerating while it is in no gear.I have cleaned the Throttle still the same issue. :(
I am having a problem with my W203 M271 engine. The 1st spark plug has been stuck and all i replace are the remaining 3. How do I remove the stuck spark plug without damaging anything on the head. My cars performance gets affected as sometimes when I press down the accelerator the car has a rough idle and engine surging.
Hey, had the same problem, you prolly have a vacuum leak. There is a pipe that sits under the airbox that trends to crack, it connects from the Pcv system to the intake manifold. Replace the pipe and car should be better
good evening my brother, I have problems with my car mercedes w203 from 2002 with m271, 1. unstable idle 2. loss of power 3. when I am stationary (on P: parking) with an unstable idle I feel the shaking engine,
Same here😂 difficulties starting when the engine is warm, very shaking (feels like it only uses 2 cylinders when starting). After 10 seconds it gets more stable. When i put it in Drive, its having a hard time not to stall😮
Good info , nice video.
Music to loud , makes it hard to focus.
Noted ✍️Good job and well explained, that is my car's engine as well even tho there's xentry in my location to troubleshoot when needed
W203 front code p0172 is problem? Thanks 🙏
May i know what is the milage (km) you can archive on full tank for this c180? Mine currently only can reach up to 550km / full tank. Izit normal?
Great video. Music is super loud though! Thinking this might be my issue - I'm using a generic bluetooth reader and torque app for most live readouts to diagnose running rich condition. Mass airflow is reading 4.9 g/s at 900rpm , and going as high as 7.8 , assuming the values are the same as it is the same engine... that's way , way above what's expected. Will update if it works! Thanks !
Hey buddy, ive bought a bluetooth OBD2 reader and also have the Torque app, but can you explain to me how i can find the live readouts with Mass airflow etc. I cannot find it on the app, i bought the full version of the app.
Also i have a C180 Kompressor 2003
Thank you in advance!
Rick
Hey I wonder if you could help me: I have a a 2225 that says that there is a left fuel level sensor short circuit to positive! How can I address that? And also how do I know if my oxigen sensors conectors are well connected?
I have P0102 code....could it be a dirty maf sensor wire?
you can measure all wiring from MAF to ECU with VOM
It would have been nice if you could have shown on the diagnostic the new reading to compair the before and after
Hi can you please help me out. My engine light is on my diagnose guy told me it’s the air flap
Can you tell me to fix it
can you send issues about your to my page.
facebook.com/ecubootcenter
Im new here ! Just subscribe to your channel.
Thank you for sharing. Im having same problem
You change maf to New? Or clean old? Sorry fo my english
I have problem 1.99 mg/tdc more for 1 year... But maf show 8kg/h I dont know what wrong... I change kompressor, intake collector, chek with smoke intake but have no results...
I have changing spark plugs,coils,maf sensor,injectors,pressure regulator,pcv valve and still have a misfire...same engine.Can You Tell me what is the problem?
did you measure compression of each cylinder?
Bad crankcase breather tube under air intake.
I have the same DTC error,I have changed the Mass Air Flow sensor with a new one,still my car is self accelerating while it is in no gear.I have cleaned the Throttle still the same issue. :(
Hello my car throws this code and the code P2058-001 Fault Lambda. Are these codes both from the same problem? Gonna change this part soon.
My air mass is 0.010 kg/h that's like 10 grams an hour. Not 100% sure if it's my Snap on returning a bad number or incorrect value.
I am having a problem with my W203 M271 engine. The 1st spark plug has been stuck and all i replace are the remaining 3. How do I remove the stuck spark plug without damaging anything on the head. My cars performance gets affected as sometimes when I press down the accelerator the car has a rough idle and engine surging.
Hey, had the same problem, you prolly have a vacuum leak. There is a pipe that sits under the airbox that trends to crack, it connects from the Pcv system to the intake manifold. Replace the pipe and car should be better
Are we going to the club downtown or fixing a Benz air mixture the music is ridiculous
I have the same problem and the charger does not work and the gate is always open
good evening my brother,
I have problems with my car mercedes w203 from 2002 with m271,
1. unstable idle
2. loss of power
3. when I am stationary (on P: parking) with an unstable idle I feel the shaking engine,
Did you solve the issue ?
Please i am fighting with this issue for month and no result
Same here😂 difficulties starting when the engine is warm, very shaking (feels like it only uses 2 cylinders when starting). After 10 seconds it gets more stable.
When i put it in Drive, its having a hard time not to stall😮
Loose the music.it disturbs your speach.
thanks for your respone
Cannot hear Your explaning. Turn of this stupid music, please.
The music is not necessary and is far too loud
I'm interested in this video but THE MUSIC IS SOOOO ANNOYING and totally unnecessary!!!!!
Take off that music
Too loud music
Can't hear a thing turn the poes music off
bloody music,just know need
Really don't understand why these youtubers have this annoying music.
music off