It rotates when it gets hit, that's the whole point of there being a special tool (impact screwdriver), otherwise you'd just hammer a regular screwdriver.
Wanna know a trick? I’ve ran into situations where the impact screwdriver still doesn’t work. So… take a standard battery powered drill, and a good bit that’s fits the fastener very well and is good quality. Turn the drill chuck torque down to the lower range, and put as much square downward pressure you can on the drill and start trying to back the screw out. The right combo of throttle/torque setting and almost always the screw will break free and if it doesn’t you will feel it slipping before you strip it. I’ve used that method when nothing else worked at all.
Your supposed to rotate the driver as you hit it with the hammer
No you’re not
It rotates when it gets hit, that's the whole point of there being a special tool (impact screwdriver), otherwise you'd just hammer a regular screwdriver.
@@AmnesiacBanana 💯
No you’re supposed to rotate the hammer as you hit the driver bro. Can’t believe yall don’t know this
@@GG4F-tf8ex it worked didnt it?
Wanna know a trick? I’ve ran into situations where the impact screwdriver still doesn’t work. So… take a standard battery powered drill, and a good bit that’s fits the fastener very well and is good quality. Turn the drill chuck torque down to the lower range, and put as much square downward pressure you can on the drill and start trying to back the screw out. The right combo of throttle/torque setting and almost always the screw will break free and if it doesn’t you will feel it slipping before you strip it. I’ve used that method when nothing else worked at all.
Mowers please
Video nine of asking for an update on the lawnmowers
No the mower r boring vids ngl
Cap
@FLboystv as a Florida boy I can confirm they are infact not boring at all
You know what’s up😤
@@BenGeilmann🧢
sickkk. i’m rebuilding a 2002 yamaha blaster.
Day three of asking for a mower update