Thanks for the video, i have been struggling to setup my SKR 1.4 turbo and TFT35 for over a month as i unable get screen to show anything until i watched this video thanks
Thank you so much for not only making a tutorial on how to set this up that was clear and concise, but also going through a brief description of how the electronics work, and common troubleshooting methods. I value that very much and will be returning to your channel frequently when I need to learn more. Thank you!
And yes senseless homing as well is needed for my build like yours with the tension at 120,128. It’s a super clean build and I want to get printing tpu on this machine ASAP
excellent video, I was having communication problems between the board and the tft display, the problem was in the baldrate and your video helped me a lot. thank you very much !!!!!!!!
I've been watching your videos for a while but just recently subscribed. I just want you to know how much you have helped me in this adventure! What you're doing is awesome and much appreciated!! Thank you!!!
Great video again, I've been using the same display on my Ender-3 Pro + SKR mini E3 for a few months now and it works great, much better than the stock display. Will be looking forward to your follow up videos on this.
@@Tom_Neverwinter I've felt that too. It seems he's gone from a labour of love to a business model. (I also feel that he now reviews and pushes items that earn him click-though monies).
thank you thank you thank you thank you thank you thank you ive been trying to get this to work with the v2 Board and you helped with all the problems like the touch display and no printer attached
If you're getting a black screen, make sure the Marlin screen resolution is set to 128x64 instead of 20x4 (Go to Settings, Screen, Marlin mode, Marlin mode type) After doing that, change background color to something else (red color, for instance). Now if you go to the Marlin simulation mode, it should work. Change back to black background color if you please.
I had the persistent 'no printer attached' message. Compiled my firmware for the board and screen again, flashed both, still that error message. I watched your vid and you mentioned the error at 6:20. I checked and indeed it was at a different speed then my board. Weird cause I compiled it with the same speed in the firmware. Ah well, long story short, I got rid of my error message. Thanks.
I have some very weird things going on with my TFT35-e3 v3.0. I have the SKR 1.4 Turbo and I've gotten some very mixed results with my display. After hooking it up as directed in your video, I only get beeping of varying loudness and sometimes I get display but with no touch or knob feedback. 1 time I got touch working with the display looking clean but that only lasted a few seconds and the display died again. I wonder if I just got a bad apple. It worked fine when I first bought it with my SKR-e3-DIP 1.1 but apparently it is no longer compatible with that board.
many thx, your videos helped me a lot!! one more thing - you mention you´ve managed to get octoprint running with changes on serial ports and some "jumper wires" :-). i think it would be extremele helpful and appreciated, if you made a (even short) video about that. i myself couldn´t find anything and without octoprint functioning it´s near to nothing for me (and most probably some others too) ps: solved - just disable "request exclusive usb" in octoprint - finish. 🙂
Your instructional videos are excellent! Thank you for taking the time and putting so much work into them. Do you happen to know if there is a TFT 35 display that will fit into a stock CR-10s case? Thank you in advance.
Keep up the great work this is the only video on UA-cam for this printer and build so if you update to the latest and greatest on the new marlin I’m sure it would do great. I do want mesh bed leveling as well and zoffset I use it on my sovol sv01 and understand on how to use it
So, I'm trying to set up a DIY IDEX machine using a BTT Octopus V1.0 and the TFT35. I have things working pretty well in marlin mode, but the touch screen mode does not show a 2nd extruder. I went into firmware and changed the hotend and extruder counts to 2 but that does not seem to do anything.
Good video. I want to use reprap on my SKR 1.4 which means using the Exp ports for the wifi board. So I can just use the TFT connections to use my TFT35 screen for PanelDue? Thanks.
Hi , I have an older display,2004A-V1.0, and I am trying to install it on SKR 3 . It doesn’t power on at all . Do you have any. Video that shows how to configure it ?
I have that display and new SKR 2 and cannot seem to get the baud rate right for one. was going to recompile marlin and I can't get that to work either. I think I will go back to the reprap display or something, ready to take a hammer to the whole works.... or better yet set it up at a couple hundred yard for target practice. was even trying to get the BTT mini display to work. (the one that gets defined as neopixel....) any advice or help would be great.
Love you Videos, so glad I subscribed !, I have a question, if I could, I upgraded to a BIGTREETECH SKR .14 Turbo and TFT50 V3.0, and installed Marlin 2.06, My issue is Both Marlin Display , Or Bigtreetech display show NO BED icon, so will not heat of course, Triple cheked the wiring, Any Ideas ?.... Thanks
DaveJS Thanks for the video, I now have a few hairs left! I just could not get the LCD to display when connected to an SKR1.4Turbo board which I'm setting up for my Enders 3 Pro. Graphics mode worked fine. Both modes worked fine if I connected the TFT3.5 to the Melzi board (running under Bugfix-1.1.x) using the Exp 3 socket. So I knew at that point the there was nothing wrong with the display. However, no joy when connected to the SKR board. But after viewing your video I was able to make the following changes to the Configuration.h file (in Bugfix-2.0.x):- Uncomment //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER (About line 1995) Comment out #define CR10_STOCKDISPLAY (About line 2081) Everything then works just as it should. So thanks again.
Daniel- Can you show how I would enable a life-time hour-meter? I've seen this in some older version of TH3D, but most firmware doesnt allow for this. I have multiple printers that I know I've worked them for 1000's of hours, and I would like to start keeping maintance records of how long parts are lasting...
when I enable the #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, I get a BEEPing from my Octopus Pro 429 mainboard. is there a different controller type that I would use?
Hello good fellow looking for help my printer will operate on the marlin side but when I go to the touchscreen side all it shows no printer connected and will not go away i changed baudrate that didn't help even tried a second LCD no good I'm trying to hook this up to a BTT v1.4 turbo any ideas what version of marlin are you running also do you have a usb cable connected while you are doing this
also, I can't get the TFT35 E3 firmware to install. I know the cables are inserted correctly. And I have tried different Baud rates. I just get No Printer Attached or as stated below I get a constant BEEP if I use the REPRAP_DISCOUNT.... display type.
I use the cr10 display setting in marlin that way you only need 2 cables the serial and the single 10 pin cable from the ender 3. I tried to set it up your way on my skr 1.4 turbo but it just refused to work? Bigtree tech stuff dose some very flaky things at times what works for some people dose not always work for others. The weird stuf I had go on with my BLtouch ,it like its posesed from it not working after flashing a new firmware to reflashing the exact same new firmware it works again?
HI there, i have an Issue, Board MKS_Gen_1.4 with Bigtreetech tft70_v3 , Display says "no printer attached" and in the "Info" System: Unknow system" I switched the "tx & rx" Cable so now they matches with the Board and Display. Baudrate is the same. The Problem is, i cant set any serial port on "minus" PlatformIO writes an error that "i cant set it on minus" It says: pasting "USART" and " -" does not give a valid preprocessing token. I dont know why im the only one who has this problem, everywhere i read that people set it on minus and it works. But I cant. Please help me Thanks
Servus Daniel ... is it possible to install this version in an Ender 3 pro? does it make sense to take a SKR 1.4 or is the SKR Mini E3 V2.0 sufficient?... Thanks and greetings from Franken
That depends on the stepper drivers you buy for it. By default, no drivers included but you can get any driver you like. For example TMC2208, TMC2209, TMC2225, etc. That will determine what features you get and if they are silent. About compatiblity of the TFT35 to the 4.2.7. there is no serial port to connect to so it's not going to work in touch mode.
I have Ender 3 and SKR MINI E3 V1.2 + TFT35-E3 V3.0 . The problem is there is a message on the screen : "No printer attached" . I have setting in Marlin configuration: 107 #define SERIAL_PORT -1; #define BAUDRATE 115200; 1993 #define CR10_STOCKDISPLAY. And where is the problem?
I am trying to implement the M600 command on my Ender 3 pro with marlin 1.1.6 installed and which already has a boot loader. I followed a video showing how to do this by going into the Advance_pause_feature in configuration_adv.h and then the configuration file. When I tried to compile it in arduino ide I received this error message..."Error compiling for board sanguino 1284P boards". I know nothing about Arduino so I am stumped and am not quite sure what to do now. My friend helped me the first time when we flashed the boot loader but isn't available because of the Covid 19 "Plandemic". Do you have any suggestions what I should do now? They would be gratefully accepted. Sorry if I'm off topic.
Is it possible and if so where to buy a longer cable (approx. 1 meter) to go between the TFT35 display & SKR V1.3 control board, the black one shown in all the pictures with the 5-pin Dupont connector on one end and 5-pin JST connector on the other?
Have a question for you out of this topic. I have the skr1.4 turbo with tmc2209 and a proximity probe. I cannot seem to get the probe to work I have tried everything in change wire diagram and nothing it is always on open with led lit up. And when i touch metal it still stay open and not triggered
I have one of these displays, when it's in touch screen mode I can print from usb or sd without a problem, but when it's in Marlin mode I can't print from usb or sd. Any ideas?
@@kevinm3751 yes am using the pi now as microcomtoller and controlling some relays with python code lots of fun try to check it out soon I will add it in my UA-cam channel
hi, i updated my tft 70 with btt firmware, and now my touch screen tactil doesn not work anymore; my knob does not work, i took files on btt github..need help
Hi thanks for the video, I used the tft35 v3 on my Ender 3 and added the skr mini e3 1.2 at the same time my question is why the second ribbon cable? I used exp1 and rs232 and everything worked, do I need the exp2 cable also? Thanks
I've been told this board won't work in a stock Ender 3 by one person and another person told me it will work. As far as I know they're still arguing over it, so I thought I'd ask someone who knows the correct answer. Will this board work on the Ender 3 with no modifications or extra hardware? Sorry I elaborated a little. I enjoyed your video and I have to wonder why the board isn't fitted as standard, The one it comes with isn't the best.
I have printers with both touchscreens and the simple encoder type on the Ender 3, and I prefer the one on the Ender 3. I guess it is because of the simplicity of the display, the command titles are in a list format which makes it easier to see what you want, maybe if the touchscreen was in a vertical format with the commands in a list I would get on with touchscreens.
I have an Anet E12 and the Marlin board memory card is not working. Thinking of upgrading to either newer Marlin or something else what do you recommend? What board?
Perhaps a little overkill for a simple Anet A8 which is all I have. But I must say the hardware - board and TFT - doesn't set you back much. But as for the A8 , its relatively flimsy print bed support,...maybe not worth the trouble. I have lived with its shortcomings and made countless practical prints. So now it is time to bite the bullet and finally buy the Ender 3. I feel so behind the curve now :-)
HI - THANKS FOR THE VIDEOS - I FIND THEM VERY GOOD - i have issues - my board wont load the bin file and screen wont come on - i have been stuck like this now for 10 weeks could you offer any help ? many thanks
Been there ... Had to find an old sd card I think 4 gig that was formatted fat32 and boom all was right again.... Originally tried with a 64 gig... I think thumb drives work also
As @edward sharp mentioned, it could be the SD card formatting but there is also a chance that the bootloader is broken. Did you try to flash a new bootloader in any case?
@@Crosslink3D i cant get my head around the bootloader story - i bought another skr1.4 - its working - BBT have been totally useless their support sucks
I’ve been following you’re tutorials for the last 2 days and I’m completely stuck, I have a Ender 3 and I’ve brought a SKR 1.4 and a TFT35 and nothing works, Marlin mode on the screen stays blank and touch screen sort of works but it permanently says “printer not attached” I’ve been on VS Code and did everything you said to do but when I put the SD card in nothing happens and when I choose SD card on on the TFT35 it just freezes on “Loading” I don’t no what to do next I’ve been ALL over the internet and no one has a solution or tutorial about fixing it, I download Marlin 2.0 and bug fix version from GitHub I’ve compiled it in VS Code with modifications like you said then I press the tick it takes around 20 minutes to compile and when it’s done it’s on the SD I then put the SD in and again nothing happens so I then pressed the arrow in VS Code which is suppose to send it straight to the board but when that’s complete it’s the same as before Marlin screen mode doesn’t work the touch screen mode does work but it’s not picking up the printer and I’ve even mucked around with the UART speed which I’ve heard and in Marlin mode I’ve moved the dial around and still nothing, The 3 fans are working which are connected to the board and cura picks up the printer but I can’t control the printer in cura cause when I press auto home or up or something nothing happens, PLEASE someone give me a quick fix cause I have literally spend the best part of 21 hours going through everyone’s UA-cam videos and I’m just going round I circles.....
Tony Gudgeon, did you already post this on our Discord channel? It would be much easier to help you there because we can exchange images and files much easier.
Usefull would be the information, that the second serial port must be activated. This is not documentated by BTT and no tutorial i have watched explains this.
Not without soldering. The stock Mainboard has rx and tx pins but they are not connected so you will have to modify the PCB: github.com/luc-github/ESP3D/wiki/Creality-CR-10-Ender-3
I can change the build volume and bltouch location in vscode I just need the correct build that you did in your am8. Like I said same skr board, steppers, and this screen. Give me your PayPal and I’ll pay. I’m up all night after work for three days because marlin is different now and everything is wrote up different in can configuration.H and adv just don’t understand all the terminology and do t have weeks to figure it out
Alles hervorragend, und Dein Wortschatz ist beneidenswert. Früher war mein Englisch fast akzentfrei, doch, je seltener ich es benutze, desto kräftiger wird mein deutscher Akzent. Ich finde seine Videos klasse und bemerkenswert gut. Vielen Dank dafür.
Thanks for the video, i have been struggling to setup my SKR 1.4 turbo and TFT35 for over a month as i unable get screen to show anything
until i watched this video thanks
Thank you so much for not only making a tutorial on how to set this up that was clear and concise, but also going through a brief description of how the electronics work, and common troubleshooting methods. I value that very much and will be returning to your channel frequently when I need to learn more. Thank you!
And yes senseless homing as well is needed for my build like yours with the tension at 120,128. It’s a super clean build and I want to get printing tpu on this machine ASAP
excellent video, I was having communication problems between the board and the tft display, the problem was in the baldrate and your video helped me a lot. thank you very much !!!!!!!!
I've been watching your videos for a while but just recently subscribed. I just want you to know how much you have helped me in this adventure! What you're doing is awesome and much appreciated!! Thank you!!!
Thank for this Video! Very helpful, especially the Marlin configs! Very well done!
Glad it was helpful!
Your video was a big help. Was able to get my touch screen working following your suggestions. Thanks for posting!
You're welcome!
Excellent explanation of the use of this board
Thanks! Didn't know I had to plug EXP1 and EXP2 to get 12864 mode.
Thanks for making this video. I ordered these to upgrade my printer just a few days ago so perfect timing.
Great video again, I've been using the same display on my Ender-3 Pro + SKR mini E3 for a few months now and it works great, much better than the stock display. Will be looking forward to your follow up videos on this.
I had exactly the same problem (BTT GTR motherboard)
Marlin screen simulator was black
But thanks to You I solve the problem!
THANK YOU!!!!!
Good to see that it work for you! Have fun!
thanks a lot! I was really struggling to get my tft to work. your fix at 7min was the issue.
I like your videos more that CHEP and Teaching Tech! I don't know if it's your European style, but you and Stefan from CNC kitchen are my faves.
Thanks! Always good to hear about a happy viewer 😍
Teaching tech was good in the early days... however he's gone to get money. He had files on his pages we could download. not anymore
@@Tom_Neverwinter I've felt that too. It seems he's gone from a labour of love to a business model. (I also feel that he now reviews and pushes items that earn him click-though monies).
thank you thank you thank you thank you thank you thank you ive been trying to get this to work with the v2 Board and you helped with all the problems like the touch display and no printer attached
If you're getting a black screen, make sure the Marlin screen resolution is set to 128x64 instead of 20x4 (Go to Settings, Screen, Marlin mode, Marlin mode type)
After doing that, change background color to something else (red color, for instance). Now if you go to the Marlin simulation mode, it should work. Change back to black background color if you please.
This is much better detailed than the Teaching Tech "guide" I followed. You earned a sub!
I had the persistent 'no printer attached' message. Compiled my firmware for the board and screen again, flashed both, still that error message. I watched your vid and you mentioned the error at 6:20. I checked and indeed it was at a different speed then my board. Weird cause I compiled it with the same speed in the firmware. Ah well, long story short, I got rid of my error message. Thanks.
Great to read this! Have fun!
I have some very weird things going on with my TFT35-e3 v3.0. I have the SKR 1.4 Turbo and I've gotten some very mixed results with my display.
After hooking it up as directed in your video, I only get beeping of varying loudness and sometimes I get display but with no touch or knob feedback. 1 time I got touch working with the display looking clean but that only lasted a few seconds and the display died again. I wonder if I just got a bad apple. It worked fine when I first bought it with my SKR-e3-DIP 1.1 but apparently it is no longer compatible with that board.
many thx, your videos helped me a lot!! one more thing - you mention you´ve managed to get octoprint running with changes on serial ports and some "jumper wires" :-). i think it would be extremele helpful and appreciated, if you made a (even short) video about that. i myself couldn´t find anything and without octoprint functioning it´s near to nothing for me (and most probably some others too)
ps: solved - just disable "request exclusive usb" in octoprint - finish. 🙂
Your instructional videos are excellent! Thank you for taking the time and putting so much work into them. Do you happen to know if there is a TFT 35 display that will fit into a stock CR-10s case? Thank you in advance.
Keep up the great work this is the only video on UA-cam for this printer and build so if you update to the latest and greatest on the new marlin I’m sure it would do great. I do want mesh bed leveling as well and zoffset I use it on my sovol sv01 and understand on how to use it
So, I'm trying to set up a DIY IDEX machine using a BTT Octopus V1.0 and the TFT35. I have things working pretty well in marlin mode, but the touch screen mode does not show a 2nd extruder. I went into firmware and changed the hotend and extruder counts to 2 but that does not seem to do anything.
Good video. I want to use reprap on my SKR 1.4 which means using the Exp ports for the wifi board. So I can just use the TFT connections to use my TFT35 screen for PanelDue? Thanks.
Hi , I have an older display,2004A-V1.0, and I am trying to install it on SKR 3 . It doesn’t power on at all . Do you have any. Video that shows how to configure it ?
I have that display and new SKR 2 and cannot seem to get the baud rate right for one. was going to recompile marlin and I can't get that to work either. I think I will go back to the reprap display or something, ready to take a hammer to the whole works.... or better yet set it up at a couple hundred yard for target practice. was even trying to get the BTT mini display to work. (the one that gets defined as neopixel....) any advice or help would be great.
Thanks for the video you helped me
the TFT cable where does that plug into in the TFT35 lcd screen? does it plug in via SWD or RS232?
How about the BIGTREETECH DIRECT TFT35 V2.0? It only came with one cable, can it be used for marlin?
Hello and thank you for the video. Do you know if I could use the same configuration on a Skr mini e3v3? Thanks you very very much
Love you Videos, so glad I subscribed !, I have a question, if I could, I upgraded to a BIGTREETECH SKR .14 Turbo and TFT50 V3.0, and installed Marlin 2.06, My issue is Both Marlin Display , Or Bigtreetech display show NO BED icon, so will not heat of course, Triple cheked the wiring, Any Ideas ?.... Thanks
DaveJS
Thanks for the video, I now have a few hairs left!
I just could not get the LCD to display when connected to an SKR1.4Turbo board which I'm setting up for my Enders 3 Pro.
Graphics mode worked fine.
Both modes worked fine if I connected the TFT3.5 to the Melzi board (running under Bugfix-1.1.x) using the Exp 3 socket.
So I knew at that point the there was nothing wrong with the display.
However, no joy when connected to the SKR board.
But after viewing your video I was able to make the following changes to the Configuration.h file (in Bugfix-2.0.x):-
Uncomment //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER (About line 1995)
Comment out #define CR10_STOCKDISPLAY (About line 2081)
Everything then works just as it should. So thanks again.
Happy to see it's working for you!
thanks for video useful to find Marlin is stored in board. means i can just replace 12864 screen and plug in . as old one died. no marlin rest ?
Hi, i love your vids, i saw that BTT realised v2 of the E3 mini, do you think its worth getting it over the v1. 2?
What settings for MKS TFT35 V1.0? I can't seem to find the info anywhere.. PLZ Help.
Daniel- Can you show how I would enable a life-time hour-meter? I've seen this in some older version of TH3D, but most firmware doesnt allow for this. I have multiple printers that I know I've worked them for 1000's of hours, and I would like to start keeping maintance records of how long parts are lasting...
have you figured it out?
@@RegressStage nope
when I enable the #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, I get a BEEPing from my Octopus Pro 429 mainboard. is there a different controller type that I would use?
Hello good fellow looking for help my printer will operate on the marlin side but when I go to the touchscreen side all it shows no printer connected and will not go away i changed baudrate that didn't help even tried a second LCD no good I'm trying to hook this up to a BTT v1.4 turbo any ideas what version of marlin are you running also do you have a usb cable connected while you are doing this
also, I can't get the TFT35 E3 firmware to install. I know the cables are inserted correctly. And I have tried different Baud rates. I just get No Printer Attached or as stated below I get a constant BEEP if I use the REPRAP_DISCOUNT.... display type.
I use the cr10 display setting in marlin that way you only need 2 cables the serial and the single 10 pin cable from the ender 3. I tried to set it up your way on my skr 1.4 turbo but it just refused to work? Bigtree tech stuff dose some very flaky things at times what works for some people dose not always work for others. The weird stuf I had go on with my BLtouch ,it like its posesed from it not working after flashing a new firmware to reflashing the exact same new firmware it works again?
HI there, i have an Issue, Board MKS_Gen_1.4 with Bigtreetech tft70_v3 , Display says "no printer attached" and in the "Info" System: Unknow system"
I switched the "tx & rx" Cable so now they matches with the Board and Display.
Baudrate is the same.
The Problem is, i cant set any serial port on "minus"
PlatformIO writes an error that "i cant set it on minus"
It says: pasting "USART" and " -" does not give a valid preprocessing token.
I dont know why im the only one who has this problem, everywhere i read that people set it on minus and it works.
But I cant.
Please help me
Thanks
Servus Daniel ... is it possible to install this version in an Ender 3 pro? does it make sense to take a SKR 1.4 or is the SKR Mini E3 V2.0 sufficient?... Thanks and greetings from Franken
are you thinking of doing a video of the skr 3 mini v2
Sure, I already have it here
Thank´s for the video
Is this board also a silenced or not?
And last but not least, is it compatible to a silenced board for the ender 3 pro V4.2.7 ?
That depends on the stepper drivers you buy for it. By default, no drivers included but you can get any driver you like. For example TMC2208, TMC2209, TMC2225, etc. That will determine what features you get and if they are silent.
About compatiblity of the TFT35 to the 4.2.7. there is no serial port to connect to so it's not going to work in touch mode.
Any idea for ramps 1.4 board connect with BTT TFT24 display..?
Thansk for your vídeo...helps a lot!!!!
Great content as always
I have Ender 3 and SKR MINI E3 V1.2 + TFT35-E3 V3.0 . The problem is there is a message on the screen : "No printer attached" . I have setting in Marlin configuration: 107 #define SERIAL_PORT -1; #define BAUDRATE 115200; 1993 #define CR10_STOCKDISPLAY. And where is the problem?
Fantastic work 👍🏼
I am trying to implement the M600 command on my Ender 3 pro with marlin 1.1.6 installed and which already has a boot loader. I followed a video showing how to do this by going into the Advance_pause_feature in configuration_adv.h and then the configuration file. When I tried to compile it in arduino ide I received this error message..."Error compiling for board sanguino 1284P boards". I know nothing about Arduino so I am stumped and am not quite sure what to do now. My friend helped me the first time when we flashed the boot loader but isn't available because of the Covid 19 "Plandemic". Do you have any suggestions what I should do now? They would be gratefully accepted. Sorry if I'm off topic.
Awesome stuff as usual.
Is it possible and if so where to buy a longer cable (approx. 1 meter) to go between the TFT35 display & SKR V1.3 control board, the black one shown in all the pictures with the 5-pin Dupont connector on one end and 5-pin JST connector on the other?
debes prolongar el cable o bien comprar las fichas y armar el cable tu
yoo Daniel
I got problem, MKS TFT70 have 8 pin cable and my printer motherboard got 10 pin cable
What to do??
Have a question for you out of this topic. I have the skr1.4 turbo with tmc2209 and a proximity probe. I cannot seem to get the probe to work
I have tried everything in change wire diagram and nothing it is always on open with led lit up. And when i touch metal it still stay open and not triggered
inductive sensor? did you follow chris riley's tutorial? and check to make sure your pins are correct.
@@IamG3X yes but i got it now thanks for your reply
I have one of these displays, when it's in touch screen mode I can print from usb or sd without a problem, but when it's in Marlin mode I can't print from usb or sd. Any ideas?
great video! thank you!
nice video what about OCTOPRINT do we connect the USB to the TFT or to the SKR 1.4 ?
@@kevinm3751 to the board itself
@@kevinm3751 yes but now I changed the card to skr pro and sbc mode of Reprap no more Octoprint
@@kevinm3751 yes agree now am running without pi only reprap with esp for the wifi plugged on the exp1 and 2
@@kevinm3751 yes am using the pi now as microcomtoller and controlling some relays with python code lots of fun try to check it out soon I will add it in my UA-cam channel
I'm having a problem on the 1.4 turbo, its not working in 12864 mode. It stays in simulator.
Is there a link for supported boards . ie MKS GEN 1.4
I bought
BIGTREETECH SKR CR6V1.0 Control Board 3D Printer part for CREALITYCR-6S E3D printer.
What screen can i buy for it?
As the specifications state it works with the original display or the TFT35 from Bigtreetech
hi, i updated my tft 70 with btt firmware, and now my touch screen tactil doesn not work anymore; my knob does not work, i took files on btt github..need help
What besides the baudrate can cause the TFT not to connect with the main board?
Can't they code rotary encoder to use rs232 i really would not like to connect those tft cables, but still wan't to use marlin interface sometimes.
Hi thanks for the video, I used the tft35 v3 on my Ender 3 and added the skr mini e3 1.2 at the same time my question is why the second ribbon cable? I used exp1 and rs232 and everything worked, do I need the exp2 cable also? Thanks
The SKR mini e3 uses one ribbon cable only, that is correct. Two cables are only needed for SKR 1.3 and 1.4.
@@Crosslink3D When I plug in both cables, it does not work on my SKR1.4 and TFT 3.5, It only works with the Rs232 and EXP3? Am I missing something?
I've been told this board won't work in a stock Ender 3 by one person and another person told me it will work. As far as I know they're still arguing over it, so I thought I'd ask someone who knows the correct answer. Will this board work on the Ender 3 with no modifications or extra hardware? Sorry I elaborated a little. I enjoyed your video and I have to wonder why the board isn't fitted as standard, The one it comes with isn't the best.
I don’t know but I can try it 😁
I have printers with both touchscreens and the simple encoder type on the Ender 3, and I prefer the one on the Ender 3.
I guess it is because of the simplicity of the display, the command titles are in a list format which makes it easier to see what you want, maybe if the touchscreen was in a vertical format with the commands in a list I would get on with touchscreens.
so what are tour serial port setting as this has to be chnaged to use tft screen
I have an Anet E12 and the Marlin board memory card is not working. Thinking of upgrading to either newer Marlin or something else what do you recommend? What board?
I'd actually go straight for the SKR 1.4 (turbo) with tmc2209.
Perhaps a little overkill for a simple Anet A8 which is all I have. But I must say the hardware - board and TFT - doesn't set you back much.
But as for the A8 , its relatively flimsy print bed support,...maybe not worth the trouble. I have lived with its shortcomings and made countless practical prints.
So now it is time to bite the bullet and finally buy the Ender 3. I feel so behind the curve now :-)
Have this setup. Probably going to pull out the tft35 because it conflicts with octoprint.
I am looking into that. What did you try to make it work with OctoPrint?
Could you please make a video for the RAMPS and MKS Gen L boards? Thanks!
I followed this to the letter and used your firmware but the screen will not come on its lights are on the back but no picture
HI - THANKS FOR THE VIDEOS - I FIND THEM VERY GOOD - i have issues - my board wont load the bin file and screen wont come on - i have been stuck like this now for 10 weeks
could you offer any help ? many thanks
Been there ... Had to find an old sd card I think 4 gig that was formatted fat32 and boom all was right again.... Originally tried with a 64 gig... I think thumb drives work also
As @edward sharp mentioned, it could be the SD card formatting but there is also a chance that the bootloader is broken. Did you try to flash a new bootloader in any case?
@@Crosslink3D i cant get my head around the bootloader story - i bought another skr1.4 - its working - BBT have been totally useless their support sucks
My skr only has exp1 will this be a problem?
hello can i connect tft cable to aux-1 input?
hi , how to TFT35 v2.0 , 3 extruder to screen
I’ve been following you’re tutorials for the last 2 days and I’m completely stuck, I have a Ender 3 and I’ve brought a SKR 1.4 and a TFT35 and nothing works, Marlin mode on the screen stays blank and touch screen sort of works but it permanently says “printer not attached” I’ve been on VS Code and did everything you said to do but when I put the SD card in nothing happens and when I choose SD card on on the TFT35 it just freezes on “Loading” I don’t no what to do next I’ve been ALL over the internet and no one has a solution or tutorial about fixing it, I download Marlin 2.0 and bug fix version from GitHub I’ve compiled it in VS Code with modifications like you said then I press the tick it takes around 20 minutes to compile and when it’s done it’s on the SD I then put the SD in and again nothing happens so I then pressed the arrow in VS Code which is suppose to send it straight to the board but when that’s complete it’s the same as before Marlin screen mode doesn’t work the touch screen mode does work but it’s not picking up the printer and I’ve even mucked around with the UART speed which I’ve heard and in Marlin mode I’ve moved the dial around and still nothing, The 3 fans are working which are connected to the board and cura picks up the printer but I can’t control the printer in cura cause when I press auto home or up or something nothing happens, PLEASE someone give me a quick fix cause I have literally spend the best part of 21 hours going through everyone’s UA-cam videos and I’m just going round I circles.....
Tony Gudgeon, did you already post this on our Discord channel? It would be much easier to help you there because we can exchange images and files much easier.
Crosslink No but it sound like just what I need, How do I access it?
when i switch to marlin it just says marlin at the top there are no options
The problem is that the mini e3 won't allow to compile full reprap discount lcd
Can I use this for marlin running on Arduino mega?
Anyone know the difference between the TFT35 E3 v3.0.0 and the new v3.0.1 TFT display?
have you figured it out yet? I'm trying to find out!!
@@matthewbleazard6965 Total radio silence. Just gave up and decided to stick with the older version because it works.
I was immediately turned off when you called out another channel
LOL, looks like you could benefit from a how to best cable management course...;) Thanks for this info, helped me get connected...
Certainly 😂
Usefull would be the information, that the second serial port must be activated.
This is not documentated by BTT and no tutorial i have watched explains this.
Does the tft35 e3 connect to the stock E3Pro motherboard?
Not without soldering. The stock Mainboard has rx and tx pins but they are not connected so you will have to modify the PCB: github.com/luc-github/ESP3D/wiki/Creality-CR-10-Ender-3
@@Crosslink3D thanks, I was hoping this would be confirmed, I'm getting the new BTT motherboard soon so I'll put my screen aside for now
Thanks.
I can change the build volume and bltouch location in vscode I just need the correct build that you did in your am8. Like I said same skr board, steppers, and this screen. Give me your PayPal and I’ll pay. I’m up all night after work for three days because marlin is different now and everything is wrote up different in can configuration.H and adv just don’t understand all the terminology and do t have weeks to figure it out
“Twelve Eight Six Four” ? 128 64 !
the marlin mode is a blank screen for me
i don't know, my no work this way.
anybody tere?
very surface level and solved nothing
Deine Videos sind ok, aber dein Englisch ist absolut Grütze
finde ich nicht, Englisch ist aber auch nicht meine Muttersprache. Aber was gar nicht ok ist dein Verhalten.
Gewisser Akzent, aber somst ist sein Englisch einwandfrei
Alles hervorragend, und Dein Wortschatz ist beneidenswert. Früher war mein Englisch fast akzentfrei, doch, je seltener ich es benutze, desto kräftiger wird mein deutscher Akzent. Ich finde seine Videos klasse und bemerkenswert gut. Vielen Dank dafür.
@@japga777 jap. kann ich nur zustimmen
i gave command G35 or G29. Its result disappeared very soon in terminal screen. How can I keep this result.