How to lay rigid vinyl tiles? | Floorify planks & tiles

Floorify Planks Tiles must be installed as a floating floor system: the floor panels must be able to expand and shrink freely at any time in response to changes in temperature. You may never glue, nail or attach the floor panels to the subfloor, to walls or to any other part of the room.
You install the Floorify Tiles glueless: the floor panels are equipped with a click system so that you can click them together easily (see “installation” for more details).
Installation of the first two rows. We pay a lot of attention to the installation of the first rows because it is extremely important that they are perfectly aligned.
Start with the first (complete) floor panel in the upper left corner of your room
Then take an incomplete floor panel (minimum 1/3 and maximum 2/3 of a panel) as first panel for the second row. Hold the panel at an angle of ± 30 degrees with the tongue in the groove of the first panel of the first row and then lower it. The tiles will click automatically into each other.
Take a third floor panel of your choice. Place the tile at an angle of ± 30 degrees on the short side with the tongue in the groove of the other panel on the second row and then lower it.
Leave an expansion joint of five mm between the last floor tile and
the wall. In order to respect the expansion joint, you will have to cut the
floor panels in length. To install the floor panels of the last row, you can
use a metal striking bar. Note: uneven slamming or slamming too hard
can cause damage to the floor panels.
CONTACT A DEALER:
floorify.com/en/dealer

[@onuryalvac7404]

Yes

[@lanaruby3177]

Boe