Great Job Steve, I am not a plumber and now I understand why you must call one and not try this by yourself. In 10 minutes you show off well-earned years of experience and knowledge. Thanks!
Having seen 50 or more videos by Steve, I have to say one of my favorite parts is when I'm introduced to yet another Lavimoniere Apparatus! I think my favorite is still the Gain Bottle Oil Line Smag Apparatus, just because of the nice, satisfying "thunk" it makes when the smag is blown from the line into the Gain bottle, but the Kitchen Sink Hose Attachment Apparatus shown in this video is awesome, too! Such ingenuity, born of decades of professional plumbing and a facility with tools and equipment!
I had same problem in my Kitchen sink. The metal pipe in wall was much bigger, bout 2"ID. Easy fix to clean the hard junk out of it. Problem fixed. Been fighting it for years,lol.Thanks
I like that water hose clamped to the sink faucet, no need to source elsewhere and bring it in. I like the coupling clamp, too, I've wondered how some would be reassembled. Good job.
I had the same problem with my kitchen sink. Finally unclogged it but should have used a drill for the router. Would have gone faster and probably clearer. Very good vid, thanks for sharing.
Another better idea is to use a high power transfer pump from harbor freight. That will push the debris out of the pipe including all sediment removed from ryobi automatic drain auger or manual snake auger
Excellent job! Wish everyone installed that kind of soldered coppe pipe and rubber joints under all sinks! Wish the one I was working on right now looked like that!
Bruce Morris fuck that dude lol that just makes the job more of a pain in the ass than it already is. I prefer just unscrewing and replacing the seals and putting back together
Crazy how I watched this years ago before i got into hvac now I’m watching your videos as a new hvac tech years later and I didn’t realized this was you 🤣🤣
I don't understand why there is food in the kitchen sink because there is no garbage disposal so of course, it's going to get clogged? Why are they even putting food/grease down here to begin with? Install a garbage disposal or stop? Then again, I have far more clogs since I got the garbage disposal. Great video. Simple and to the point. Ditto on the jackrabbit chillin' out at the end. Loved it.
@@kingjames4886 The rubber sleeve acts like a buffer between different metals. 1. the copper pipe and 2. the clamp looks like stainless steel. basically so they won't make contact with each other and cross contaminate which would cause corrosion. usually those rubber sleeves come with those types of clamps.
Great video sir. Love the accent too. Yeah. I've done this with 50' of snake to one of our drains. Little bit of sediment but no snags or clogs. Drain ate the whole snake. Still, sometimes the washing machine emptying itself causes it to back up and I still don't have a good explanation for it. No roots in the pipe, nice and freely feeds the snake back and forth. I'm ... stumped. Let's see if it happens again. Might have to go pro for this one which is too bad. I have fixed every drain in the house myself except this one to the dry well.
I don't have those tools & it seems like too much trouble for me; although I do obtain my own skill's as a lady, but this one is above my skills, LOL!!!
Thank you! I enjoyed this! I took off my pee trap? From my bathroom wall sink that has been completely stopped up for weeks. I use my main bsth sink but really want to use my bedroom sink again. So thinking something blocking in the little pee trap zI took it apart, then the back pipe came off the wall because the o ring was rusted. Nothing was in the pee trap so the clog is in the wall. I am 65 in heart failure so hard for me to do much. But knowing if I call a plumber and he will do what you are doing and I pay him a few hundred or so at least I know what I am paying him for. I find plumbing interesting.
I'm in my sixties, just called my local ace hardware for an auger, because my clog is in the wall. $30, attaches to my drill. My kid I'd picking it up in a couple of hours. WISH ME LUCK!
YeeeAaa it's designed fuh coppa. Thanks for making this video. I'm gonna make one of those hose attachments before my wife flies off the handle about the sink. But I have PVC not coppa. Wish I had coppa.
Great video, but I got a problem that the video doesn't address. I got a blocked sink, and the sewer line goes straight to another sink on the wall behind. I can't get my snake to go down the T to the main line. It keeps going straight across and coming out the other sink line on the other side of the wall. Any tips for getting the snake line to make the 90 and head down to the main line? Thanks!
The question shouldn't be "why do you wear gloves?" it should be "why isn't everyone wearing gloves?" you come into contact with some really nasty and in most causes rotting food and chemicals in drains. Why would you want to touch that stuff with out gloves.
Flesh eating bacteria will live in a lot of places. I was once cleaning out my gutters by hand, they were wet with leaves and my hands started prickling and stinging. The little creepers were eating into my hand. Took a lot of scrubbing to get the stink off too. I use gloves from now on.
Question may be silly but if snake didnt work would it be possible to put drano into a wall pipe like with a long funnel? Put a buck undeath the pipe to catch it if comes back out?
Won't do anything for the 2000 layer bacteril build up that forms in these laterals. I opened a 70 year old steel drain line yesterday. The 1 1/2 inch pipe had a water channel thru it of less than a half inch . Almost solid dead bacteria and calcium build up. That chain would have done nothing . Needed a cutter head.
As a plumber i understand, many people forget that some situations you just gotta lay down, on your back or sides and tremendous effort of strength and being carefull at the same time.
I like your video, very useful for an issue I had, can you tell me what's the name of the tool that you were sort of 'drilling' from min. 6:20 sec. Looking forward to hearing from you, thnx in advance...
I watched this video from the beginning, your taking apart what looks like COPPER piping as you use the snake to pull out grime from within the pipe that's hidden in wall structure, and finally connect pipes and attach it using some gadget you say is copper emission {s}. You stand up and turn water on but when camera is focused back under the sink the the pipe is all White, did you leave something out or What ? Just Curious ..............
I did the same thing but I can't get through the wall, I cleaned out the pipe and put it back together. Failure. So, I guess I have to get something to go through the pipe, right? I would think so, I don't know. What can I use? A hammer and wire hanger?
My kitchen drain pipe is in floor, how do i prevent back flow into my face? Is there a tip that blows forward only rather than a back and forth tip? Thanks
When I looked into the pipe in the wall under my sink its all black with hard build up and sludge. It looks like years and years of sludge has caked and hardened and I could barely even get the ptrap pipe back in. So I ended up having to scrape out all this nasty smelling black crude oil/coal stuff that has build up in the pipe. There was barely even a hole in the pipe for water to flow. God please help me to fix this pipe without having to replace the whole thing.
@coryjohnson2486 yep I did. Used the industrial strength septic safe green slime and it literally cleaned it so well the metal was shiny and clean looking
@@50kT my kitchen sink is clogged back behind the wall 🤦♂️. I’ve tried all of the chemicals and took all the pipes apart. I put more Drano in a squeeze bottle and stuck it back into the pipe going into the wall and I’m hoping maybe letting that sit overnight will break it up. If not, I gotta call the landlord. Glad u got ur stuff figured out!
@coryjohnson2486 yea I did it overnight. Try Green Gobler Main Line Opener (at home depot). That worked for me, just pour it at a time u can let it sit as long as possible. And follow the instructions, can't remember but I may have also used boiling water
It was copper pipe. This suggests that it was built in the 1950s /60s. Copper was always expensive. It was replaced with ABS, then PVC, starting in the 1960s
Thanks for the info . I have a clogged sink . Took apart plumming pipes . But I will try it with snake Arerater. Let you know how it did .m Plumber repair is ridiculous . Thanks again
Vinegar and baking soda mix. Things like draino and other chemical based cleaners might eat away at your piping if it sits or is used too frequently. Vinegar and baking soda help lift grim off the lining of your pipes via its fizzing action which can then be rinsed away with warm/hot water.
I really would like to know your experience about this A couple of question for a plumber or any drain technician 1) Drain cleaning equipment, I do not know if it is just me, but Ridgid is a piece of shit drain cleaning equipment, for instance, I have tried their Ridgid K-45 it is not good enough compared to the Spartan 700, their K400 it is a piece of shit compared to the General Jr. I bought me a General easy rooter which I haven't used it yet. I'm thinking about getting me a General super Vee and I will compare it with Ridgid K45, Spartan 700. So What have been your experiences regarding drain cleaning equipment with Spartan & General, trojan, I wouldn't even consider Ridgid? 2) In a case of a bad blockage or badly clogged in a branch (2'' line) does a bigger cable help? for instance a 1/2'' of 5/8'' cable. I had a bad clogged the other day, on a KS drain, I was using the Jr. General drain auger but I could get it clear, on the contrary, my tip fell off, as a matter of fact, I thought I kinked my cable but I didn't when I pulled it out, I just couldn't get the line clear. Thanks
Do you have a video on how to replace the snub-out? I've got a copper one with a pin hole right next to the wall. It's wielded. Not sure on how to replace it. Any advice will be appreciated.
My parents have a clogged kitchen sink everything else is working fine They said it is backing up in to the bathroom sink. I was just wondering what you think I should try first.
Kitchen clog. Snaked sink from under sink till it stopped, did the same from the washout under the cabinets till it stopped. Still wont drain. HELP. Bathrooms drains flow freely.
Great Job Steve, I am not a plumber and now I understand why you must call one and not try this by yourself. In 10 minutes you show off well-earned years of experience and knowledge. Thanks!
my nanna could do this!
Thanks for sharing your knowledge, Steven. You've bailed me out many times!
Having seen 50 or more videos by Steve, I have to say one of my favorite parts is when I'm introduced to yet another Lavimoniere Apparatus! I think my favorite is still the Gain Bottle Oil Line Smag Apparatus, just because of the nice, satisfying "thunk" it makes when the smag is blown from the line into the Gain bottle, but the Kitchen Sink Hose Attachment Apparatus shown in this video is awesome, too! Such ingenuity, born of decades of professional plumbing and a facility with tools and equipment!
I had same problem in my Kitchen sink. The metal pipe in wall was much bigger, bout 2"ID. Easy fix to clean the hard junk out of it. Problem fixed. Been fighting it for years,lol.Thanks
Love these videos! The date-stamps do not matter - the fun is timeless. Bonus points for the bunny!
What? 🤨
How are there nearly 400 dislikes. It's a video showing how to rod and flush a drain. Mission accomplished. WTF?
Those are all the dudes with plastic pipes who wish they had coppa.
Coppah duse
Plumbers
Jealous under-employed plumbers.
400 men that wives cheated with plumbers that fixed her pipes.
I like that water hose clamped to the sink faucet, no need to source elsewhere and bring it in. I like the coupling clamp, too, I've wondered how some would be reassembled. Good job.
I had the same problem with my kitchen sink. Finally unclogged it but should have used a drill for the router. Would have gone faster and probably clearer. Very good vid, thanks for sharing.
I like that hose from faucet trick Steve! Gonna make me one tomorrow.
***** works good on square air raiders not so good on belvied ones
Totally agree - would love to see a tips of the trade video of all these golden nuggets Steve Lav has to offer.
Another better idea is to use a high power transfer pump from harbor freight. That will push the debris out of the pipe including all sediment removed from ryobi automatic drain auger or manual snake auger
Excellent job! Wish everyone installed that kind of soldered coppe pipe and rubber joints under all sinks! Wish the one I was working on right now looked like that!
Bruce Morris fuck that dude lol that just makes the job more of a pain in the ass than it already is. I prefer just unscrewing and replacing the seals and putting back together
Thank you, great video😊
Crazy how I watched this years ago before i got into hvac now I’m watching your videos as a new hvac tech years later and I didn’t realized this was you 🤣🤣
I don't understand why there is food in the kitchen sink because there is no garbage disposal so of course, it's going to get clogged? Why are they even putting food/grease down here to begin with? Install a garbage disposal or stop? Then again, I have far more clogs since I got the garbage disposal.
Great video. Simple and to the point. Ditto on the jackrabbit chillin' out at the end. Loved it.
Great idea with the test hose! Makes sense whether it's metal pipe or plastic. Now you don't have to put it back together just to take it apart again!
I love you all who post this stuff!! Huge big help! Thanks soooo much!!
Favorite parts: the rubber attachment to support the pipe connection, the breathing, the whispering and: "It's designed fa caahpah...: #thankssteve
7:17 :D
I CAME TO THE COMMENTS TO SEE IF ANYONE ELSE CAUGHT THAT 😂😂😂😂😂
the rubber isn't really supporting it, it's hanging from the sink.
cahpahs and mamas
@@kingjames4886 The rubber sleeve acts like a buffer between different metals. 1. the copper pipe and 2. the clamp looks like stainless steel. basically so they won't make contact with each other and cross contaminate which would cause corrosion. usually those rubber sleeves come with those types of clamps.
LOOK....Steven is working again
Great job Steven
dklucas1 thanks for the comment
It feels satisfying to watch! I need that snake tool!
Looks like you got it clear, great job Steve.
teh60 she is flowing nicely
Nice work. When plumbing is sealed up like that, I am surprised they don't install a cleanout to make snaking easier.
They do its the plug on the bottom of the trap
@@youclogthemweclearthem2394 Thank you
Am hoping that one day I will be able to purchase this kind of machines and tools I a a plumber too
Loved the jackrabbit at the end💖
Great video!! Thanks
nice job Steve, you did it like it was an easy peezy lemon squeezy...
Love that idea for the water hose 👍
Copper dwv is garbage pipe. Great job and keep up the good work!
Dunn Plumbing llc thanks man
Great job Steve
hannarye thanks charles
Great video sir. Love the accent too. Yeah. I've done this with 50' of snake to one of our drains. Little bit of sediment but no snags or clogs. Drain ate the whole snake. Still, sometimes the washing machine emptying itself causes it to back up and I still don't have a good explanation for it. No roots in the pipe, nice and freely feeds the snake back and forth. I'm ... stumped. Let's see if it happens again. Might have to go pro for this one which is too bad. I have fixed every drain in the house myself except this one to the dry well.
I don't have those tools & it seems like too much trouble for me; although I do obtain my own skill's as a lady, but this one is above my skills, LOL!!!
Oh yeah i like that hook up to the faucet. Think ill be making one. Thanks.
Boiler Teardown i use it from time to time
Thank you! I enjoyed this! I took off my pee trap? From my bathroom wall sink that has been completely stopped up for weeks. I use my main bsth sink but really want to use my bedroom sink again. So thinking something blocking in the little pee trap zI took it apart, then the back pipe came off the wall because the o ring was rusted. Nothing was in the pee trap so the clog is in the wall. I am 65 in heart failure so hard for me to do much. But knowing if I call a plumber and he will do what you are doing and I pay him a few hundred or so at least I know what I am paying him for. I find plumbing interesting.
I'm in my sixties, just called my local ace hardware for an auger, because my clog is in the wall. $30, attaches to my drill. My kid I'd picking it up in a couple of hours.
WISH ME LUCK!
Nice Job Steve, You need a easy one once and a wile.
Arnie Grote easy is good
Arnie Grote es
This man sounds like a talking cigarette.
Good job 👏👍👏
Steven how do you know how far to feed the snake without it getting stuck?
Interesting question
By code, the lateral to the soil pipe should be less than 6 feet.
Awesome job 👍😄
Great work Steve. Thanks for posting!
efman2k3 thanks for the comment
YeeeAaa it's designed fuh coppa.
Thanks for making this video. I'm gonna make one of those hose attachments before my wife flies off the handle about the sink.
But I have PVC not coppa. Wish I had coppa.
nice video... there is a nust under the p trap to drain the pipe and sweat off the copper so much easier and when putting it back
Great message. Thank you robertson mechanical. NJ here..
Great video, but I got a problem that the video doesn't address.
I got a blocked sink, and the sewer line goes straight to another sink on the wall behind.
I can't get my snake to go down the T to the main line.
It keeps going straight across and coming out the other sink line on the other side of the wall.
Any tips for getting the snake line to make the 90 and head down to the main line? Thanks!
How far do you know how to go?
You did a great job. At first, I thought that rabbit was dead ! Ha, Ha.
The question shouldn't be "why do you wear gloves?" it should be "why isn't everyone wearing gloves?" you come into contact with some really nasty and in most causes rotting food and chemicals in drains. Why would you want to touch that stuff with out gloves.
Shawn Rigoulot my first thought, why is he in gloves?
Flesh eating bacteria will live in a lot of places. I was once cleaning out my gutters by hand, they were wet with leaves and my hands started prickling and stinging. The little creepers were eating into my hand. Took a lot of scrubbing to get the stink off too. I use gloves from now on.
@@DailyRealness No no, that makes no sense. I still don't understand why he wears gloves.
The bunny at the end though 🤣🤣🤣🤣🤣🤣🤣
Looks good have not used it yet
Thanks for passing the knowledge
Urgent: when I put my water hose in like you did, the water comes back out. Does this mean there is something in there blocking the hole? thanks
yup
@Caleb that is very smart. Didn't think of that. Water is annoying to clean up and hook up.
Lol
Nice .my sink block 3 months already
Does this work on plastic pipe too
Question may be silly but if snake didnt work would it be possible to put drano into a wall pipe like with a long funnel? Put a buck undeath the pipe to catch it if comes back out?
Thanks for the tips.
What about cleaning residue off inside of pipes that you can't remove isn't there a drill attachment and a nylon brush on a long flexible reel
Thank you so much man.
Hi Steven. Kitchen copper drain might be leaking in exterior block wall not sure. Cabinets can not be removed. What is your suggestion. Thank you
What do you think of the Milwaukee m12 air snake for blowing out clogs?
It will blow air into the vent pipe or send the clog farther and clog it some more. Will only clear out a P Trap.
Won't do anything for the 2000 layer bacteril build up that forms in these laterals. I opened a 70 year old steel drain line yesterday. The 1 1/2 inch pipe had a water channel thru it of less than a half inch . Almost solid dead bacteria and calcium build up. That chain would have done nothing . Needed a cutter head.
Nice job Steve
Harry Dickson thanks harry
thats the ticket ,, good job good vid
nate thanks nate
How far down is the clog usually? I was thinking of pushing an rg6 cable TV wire down there to (mostly) clear it.
Hi, I was wondering what kind of what tape did you use at the end? It was not shown in the video
What is the name of that black pipe piece at 7:15, and where can i buy it
Flexible pvc coupling
What could you do without electric wire thing that you pushed and cleaned the pipe?
Solid cross connection my friend.
Dude you breathe like Darth Vader. Lol
That's how you do the job right, otherwise you just swear like me which isn't the best at a job site.
As a plumber i understand, many people forget that some situations you just gotta lay down, on your back or sides and tremendous effort of strength and being carefull at the same time.
hi buddy whats is the name of machine did you used
what kind of pliers were those to get that fitting off? the ones u used to loosen the fitting off the p trap / u joint
They're called "channellocks"
pipe wrench
Slip joint pliers . Always get the ones wit undercut grooves. Chanellock, ETC. The com in all sizes. 3 inch to 24 inch.( length )
I don’t have any of these tools. What do I do?
call a plumber
Como se llama el aparato que usaste, es un taladro o que es
Good job. What's the white cover product you put on the drain J after completion? Thanks
It’s a safety thing. It’s a trap wrap. It’s so people in wheelchairs don’t get burnt
I like your video, very useful for an issue I had, can you tell me what's the name of the tool that you were sort of 'drilling' from min. 6:20 sec. Looking forward to hearing from you, thnx in advance...
Good video, appreciate info on mission clamp as well as the easy connection to faucet to check drainage. Thanks!
Patrick Harris thanks for the comment
I watched this video from the beginning, your taking apart what looks like COPPER piping as you use the snake to pull out grime from within the pipe that's hidden in wall structure, and finally connect pipes and attach it using some gadget you say is copper emission {s}. You stand up and turn water on but when camera is focused back under the sink the the pipe is all White, did you leave something out or What ? Just Curious ..............
Esther Axenty its a sleeve, he took one off in the beginning of the vid.
I have a ? How far can you insert that snake bc my sink is clogged
I did the same thing but I can't get through the wall, I cleaned out the pipe and put it back together. Failure. So, I guess I have to get something to go through the pipe, right? I would think so, I don't know. What can I use? A hammer and wire hanger?
What is this product called
My kitchen drain pipe is in floor, how do i prevent back flow into my face? Is there a tip that blows forward only rather than a back and forth tip? Thanks
When I looked into the pipe in the wall under my sink its all black with hard build up and sludge. It looks like years and years of sludge has caked and hardened and I could barely even get the ptrap pipe back in. So I ended up having to scrape out all this nasty smelling black crude oil/coal stuff that has build up in the pipe. There was barely even a hole in the pipe for water to flow. God please help me to fix this pipe without having to replace the whole thing.
😂 I hope u got that figured out.. it’s been 4 years since u commented
@coryjohnson2486 yep I did. Used the industrial strength septic safe green slime and it literally cleaned it so well the metal was shiny and clean looking
@@50kT my kitchen sink is clogged back behind the wall 🤦♂️. I’ve tried all of the chemicals and took all the pipes apart. I put more Drano in a squeeze bottle and stuck it back into the pipe going into the wall and I’m hoping maybe letting that sit overnight will break it up. If not, I gotta call the landlord. Glad u got ur stuff figured out!
@coryjohnson2486 yea I did it overnight.
Try Green Gobler Main Line Opener (at home depot).
That worked for me, just pour it at a time u can let it sit as long as possible.
And follow the instructions, can't remember but I may have also used boiling water
Is that pipe the right size? We do mostly 2 inch for kitchens here in NY. 1.5 is for bathroom sinks.
It was copper pipe. This suggests that it was built in the 1950s /60s. Copper was always expensive. It was replaced with ABS, then PVC, starting in the 1960s
This guys pro.
Steve do yo think a ridgid k400 is good for typical house calls like hair, or dried out cast iron pipes 1-1/2" or 2"
Steve, was that the Taj Mahal?
Sir What is the name of this machine?
Doesnt that trap have a clean out ?
Thanks for the info . I have a clogged sink . Took apart plumming pipes . But I will try it with snake Arerater. Let you know how it did .m Plumber repair is ridiculous . Thanks again
What if you hit something solid?
What snake is that how long does it reach ?
Smart handyman
What do you recommend as a weekly cleaner to prevent clogging again?
Vinegar and baking soda mix. Things like draino and other chemical based cleaners might eat away at your piping if it sits or is used too frequently. Vinegar and baking soda help lift grim off the lining of your pipes via its fizzing action which can then be rinsed away with warm/hot water.
5 gallon bucket filled with hot water from the tub spout. Pour in kitchen sink all at once. Repeat until all the grease is melted.
👌🕵perfect😁👍
Great job
I really would like to know your experience about this
A couple of question for a plumber or any drain technician
1) Drain cleaning equipment, I do not know if it is just me, but Ridgid is a piece of shit drain cleaning equipment, for instance, I have tried their Ridgid K-45 it is not good enough compared to the Spartan 700, their K400 it is a piece of shit compared to the General Jr.
I bought me a General easy rooter which I haven't used it yet.
I'm thinking about getting me a General super Vee and I will compare it with Ridgid K45, Spartan 700.
So What have been your experiences regarding drain cleaning equipment with Spartan & General, trojan, I wouldn't even consider Ridgid?
2) In a case of a bad blockage or badly clogged in a branch (2'' line)
does a bigger cable help? for instance a 1/2'' of 5/8'' cable.
I had a bad clogged the other day, on a KS drain, I was using the Jr. General drain auger but I could get it clear, on the contrary, my tip fell off, as a matter of fact, I thought I kinked my cable but I didn't when I pulled it out, I just couldn't get the line clear.
Thanks
I KNOW THIS VIDEO IS OLD, BUT WOULD A WET VACUUM COLLECT ALL THE DEBRIS FROM THE DRAIN LINE?
Yes. I used that when needed.
What the thing you used that's attached to your drill called?
snake
well... I like that rabbit
Do you have a video on how to replace the snub-out? I've got a copper one with a pin hole right next to the wall. It's wielded. Not sure on how to replace it. Any advice will be appreciated.
Clean it well and try urethane caulk and fiberglass cloth. Urethane will grab toi almost anything and sets up from the moisture in the air.
My parents have a clogged kitchen sink everything else is working fine They said it is backing up in to the bathroom sink. I was just wondering what you think I should try first.
draino
Kitchen clog. Snaked sink from under sink till it stopped, did the same from the washout under the cabinets till it stopped. Still wont drain. HELP. Bathrooms drains flow freely.
I did this but now the pipes leak that attach directly to the double sink drains. I have 2 buckets underneath catching the drips. What now?
Use Teflon tape. Seals the connections.
What is the name of electric wire machine
Excelente!!!