This was very helpful, thanks for posting this. FWIW I used a blow dryer with a flat nozzle, and a 2" dull plastic putty knife just to catch the bottom inside corners. I only wish your notice at 05:37 was mentioned earlier in the video, cuz I was definitely scratching my head trying to figure out why badge wouldn't give at all. After seeing that part of the video and realizing where I was going wrong, I had both badges off in like 2 minutes.
nice. "easy" but you got to work at it like a lot of other, simple mods on these cars. I wish someone (could be you) made a turn indicator that took the place of the fender badge [hint, hint, hint]. replacement LED lights are made for the fronts, the mirrors, and tails, but no body makes a flat/nearly flat LED turn indicator for the fender badge . It doesn't even need to be sequential; it just needs to flash
Any place that does wraps on cars should have no problem doing this for you. If you are in an area that doesn't have any wrap installers then I would consider asking a body shop.
This was very helpful, thanks for posting this. FWIW I used a blow dryer with a flat nozzle, and a 2" dull plastic putty knife just to catch the bottom inside corners. I only wish your notice at 05:37 was mentioned earlier in the video, cuz I was definitely scratching my head trying to figure out why badge wouldn't give at all. After seeing that part of the video and realizing where I was going wrong, I had both badges off in like 2 minutes.
nice. "easy" but you got to work at it like a lot of other, simple mods on these cars. I wish someone (could be you) made a turn indicator that took the place of the fender badge [hint, hint, hint]. replacement LED lights are made for the fronts, the mirrors, and tails, but no body makes a flat/nearly flat LED turn indicator for the fender badge . It doesn't even need to be sequential; it just needs to flash
whenever removing the plastic piece at the bottom, do i have to remove the mudguards?
Can I do Custom because I like pink color and the? I check your website; I didn't see any pink color. Long with the rear wrx emblem
Where have you guys been??? You’ve been missed.
Where can I get this done if I don’t have access to a heat gun
Any place that does wraps on cars should have no problem doing this for you. If you are in an area that doesn't have any wrap installers then I would consider asking a body shop.
What about a hair dryer? They typically work. Sorry I'm late to the party