Hi everyone, when assembling, follow all steps exactly. Take special care in the minute ᐅᐅ 6:18 this step is very IMPORTANT, otherwise the grinder will not work properly!!
Hi, i did everything like in this video, i made it also 5 times work without Beans . I have problem that my coffee taste like water its too thin and coffe in charger is too wet. I also changed from 7 to 3,5 degree of grinding level and the coffee is still thin.Please can you help me? Thank you
@Hello Uros, did you grease the brew group and the spindle? As described in my other video? Everything has to be easy to move so that the machine regulates back.
I was supper careful but it wouldn't work. So I checked inside the sleeve and it seems like the thread is filed down inside the sleeve. Can you confirm that there is supposed to be a thread in the sleeve ? or is it smooth inside ? After i do the sleeve the grinder doesn't turn with the screwdriver as it does with you.
Hi, I’ve followed the instructions but still get an error that there’s no beans. When I turn the screw my grinder does not turn, although does turn when performing the first function test. Any idea what I’m doing wrong?
Thanks for the video, you saved me new coffee machine as someone had dropped a piece of plastic into the grinder and with the help of your video I was able to take it apart and remove the debris. Much appreciated.
Amazing video. I have just gotten this machine and was ready to return it because of the 2 loud clicking noises after the grind but this video shows the complete operation with those sounds. Thanks for the amazing detail.
your videos are very good, despite always maintaining them for years and good to watch because we ended up learning something new. keep it up ... congratulations
Great step by step tutorial - thought we would be down £400 for a new machine after the grinder jammed. Cleaning the grinder as show. did the job perfectly. Coffee flowing again! Many thanks!!
You just saved as roughly 150 € and several mornings without coffee. Thank you so much! Some wooden material got stuck in the grinder and caused the exact same blocking sound.
Thank you for this video. I had the same problem with a stone stuck in the grinder. I follow your instructions a repaired it in a few minutes. Great video, thanks
Just like to say thank you. I just done my parents machine. That screw @ 6:18 caught me out. I thought I had lined it up, I was expecting to feel the lugs as I tightened the screw. Then I poked the top to see if it was tight and it just spun round. Didn't think much of it at the time but I lost position. 2nd time round all good ☕☺
Also at 6:50 - 7:04, the adjuster is shown at 50, and then wide open. If it isn't wide open the grinder cone doesn't fall into position the the grinds will be unusably coarse. Moving the adjuster manually full open as shown (though the importance wasn't noted) and then repositioning to the marked half way worked for me. This video was very helpful thank you!!
Thank you for this very detailed video. Saved me sending my machine away and paying a fortune! Took me about 60 minutes and my machine was making perfect coffee again ☕
"I'm so glad I found this video on how to clean the grinder of my Delonghi automatic coffee machine! The instructions were incredibly helpful and easy to follow, and I was able to clean the grinder in no time at all. Before watching this video, I had no idea how to properly clean my Delonghi coffee machine's grinder, and I was worried about damaging it or having to pay for a professional cleaning. But thanks to this video, I was able to do it myself and save myself a lot of hassle and money. Overall, I highly recommend this video to anyone who owns a Delonghi automatic coffee machine and wants to keep it in top condition. It's definitely worth taking the time to watch and learn!"
As soon as I heard the sound in your video, I knew I was in good hands. My DeLonghi started making the same noise out of nowhere. We found a machine screw jamming up the grinder. Must have come from the bag of coffee beans. Thanks for the great video!
Thank you so much for the instructions, I worked in my Delonghi Magnifica ESAM4200. The model is slightly different but I was able to remove a piece of wood I believe that was stuck in the grinder. Gonna move away from Lavazza after this!
Thanks for the walkthrough. My ECAM22.320.SB had a stuck grinder and I was able to unjam it following your help. Broke off a few plastic tabs taking the cover off though, as mine has hinges yours does not seem to have. All good once screwed back together.
Thank you so much for the video. There was an issue with the grinder and the coffee tastet completely bland, now everything is back to normal and I couldn’t be happier.
Great video. I found a stone too, in my 5 years of using this apparatus it was a first stone ever, have to be more careful when pouring beans in I guess.
Thanks very much for posting this. My grinder had jammed on my Magnifica EVO and turns out it was a piece of plastic 14mm long (which presumably was in a bag of beans). Once I had removed the top burr I could extract the foreign object. So no need to remove the lower burr with all the complication that involves.
Thank you so much!!❤ a tip for a FASTER REPAIR: I just did the steps up to 1:50min and vacuumed out the dirt. done. so the machine was repaired without unscrewing the grinder. 🎉
Thankyou Sir, I have a different model but it made the exact same noise as this at the beginning- thanks to your video I had an option to try and I'm now drinking delicious coffee :-)
‘Magnifica’ video and explanation. A credit to you for very clear and precise instructions. Good focus. Hope you do such good work for other machines. Thanks you.
Great video thank you. First time around,at 6:49, I didn't have the grinder wound off completely. So the outer ring wasn't seated properly. But apart from that I think I did OK 🙂👍. The tutorial at the end for calibrating the grind was excellent!
Hi everyone, when assembling, follow all steps exactly. Take special care in the minute ᐅᐅ 6:18 this step is very IMPORTANT, otherwise the grinder will not work properly!!
Hi, i did everything like in this video, i made it also 5 times work without Beans .
I have problem that my coffee taste like water its too thin and coffe in charger is too wet. I also changed from 7 to 3,5 degree of grinding level and the coffee is still thin.Please can you help me?
Thank you
@Hello Uros, did you grease the brew group and the spindle? As described in my other video? Everything has to be easy to move so that the machine regulates back.
I was supper careful but it wouldn't work. So I checked inside the sleeve and it seems like the thread is filed down inside the sleeve. Can you confirm that there is supposed to be a thread in the sleeve ? or is it smooth inside ? After i do the sleeve the grinder doesn't turn with the screwdriver as it does with you.
@sara there is no (6:10) thread in the aluminum sleeve. When the screw is tightened, the grinder also turns at the end.
Hi, I’ve followed the instructions but still get an error that there’s no beans. When I turn the screw my grinder does not turn, although does turn when performing the first function test. Any idea what I’m doing wrong?
You saved us about 14 days without coffeemachine and service fees, thank you much :-)
Wonderful video. Had the same problem. All instructions are clear and now my machine is back to duty ! Many thanks !!!
Learning all of this for my new employer. This was so informative!!! Thank you so much!
Dziękuję za ten poradnik. Właśnie naprawiłem młynek i wszystko działa jak należy. Filmik bardzo pomocny.
This video saved me from buying a new delonghi machine. Had the exact same issue 👍🏽 amazing
Very helfpful video! Recently my grinder blocked and I thought to send my coffee machine to the service. I fixed it by myself by you. Thanks!
Thanks for the video, you saved me new coffee machine as someone had dropped a piece of plastic into the grinder and with the help of your video I was able to take it apart and remove the debris. Much appreciated.
Amazing video. I have just gotten this machine and was ready to return it because of the 2 loud clicking noises after the grind but this video shows the complete operation with those sounds. Thanks for the amazing detail.
Dzięki za super video poradnik, młynek znów działa💪☕👍
Late coffee this morning, but I followed your instructions and now the machine is working again. Big thank you!
Perfect video! Thanks, I'm going to try servicing my grinder too!
Thank you for making this! This saved my mom's coffee machine
your videos are very good, despite always maintaining them for years and good to watch because we ended up learning something new. keep it up ... congratulations
Followed this for exact same issue with my delongi dinamica and it works. Follow instructions precisely.
Great step by step tutorial - thought we would be down £400 for a new machine after the grinder jammed. Cleaning the grinder as show. did the job perfectly. Coffee flowing again! Many thanks!!
You just saved as roughly 150 € and several mornings without coffee. Thank you so much!
Some wooden material got stuck in the grinder and caused the exact same blocking sound.
Thank you for this video. I had the same problem with a stone stuck in the grinder. I follow your instructions a repaired it in a few minutes. Great video, thanks
Perfect, just what I needed!
You just helped me save my machine!!!! Thank you! I see you have maintenance videos too, I will follow them! 👍
Best DIY video I have seen. This made me confident in cleaning and adjusting my Magnifica S. Thank you
Followed the procedure and it fixed my Delonghi right up! Huge thanks!
Just like to say thank you. I just done my parents machine.
That screw @ 6:18 caught me out. I thought I had lined it up, I was expecting to feel the lugs as I tightened the screw. Then I poked the top to see if it was tight and it just spun round. Didn't think much of it at the time but I lost position. 2nd time round all good ☕☺
Also at 6:50 - 7:04, the adjuster is shown at 50, and then wide open. If it isn't wide open the grinder cone doesn't fall into position the the grinds will be unusably coarse. Moving the adjuster manually full open as shown (though the importance wasn't noted) and then repositioning to the marked half way worked for me.
This video was very helpful thank you!!
Thanks !! Was using a blade grinder as I thought that the delonghi grinder was toasted. Saved me some buck man Thank you so much.
Thanks very much you’ve saved the day, I was panicking, no coffee, followed your instructions and bingo it’s working perfectly again 🤩
Hi Mike, I'm very glad that my instructions helped you, and thank you so much for your generosity 👍
Thanks mate. My machine is all fixed now thanks to your clear video.
Thank you
Service wanted to charge me at least £99 up to £250....
It took me 30min to sort it.
Found a hard rock in the grinder.
Thank you again
Thank you for this very detailed video. Saved me sending my machine away and paying a fortune!
Took me about 60 minutes and my machine was making perfect coffee again ☕
You are a lifesaver! Just fixed my dinamica by watching this video.
Very good Video. Unexciting, without unnecessary music special effects, but not boring and full of information. I like this. Thank you.
Thank you so much for this video. I’ve just followed the steps and I’m so satisfied with the results.
Awesome video. Never would have fixed my machine myself without it. Thank you.
"I'm so glad I found this video on how to clean the grinder of my Delonghi automatic coffee machine! The instructions were incredibly helpful and easy to follow, and I was able to clean the grinder in no time at all.
Before watching this video, I had no idea how to properly clean my Delonghi coffee machine's grinder, and I was worried about damaging it or having to pay for a professional cleaning. But thanks to this video, I was able to do it myself and save myself a lot of hassle and money.
Overall, I highly recommend this video to anyone who owns a Delonghi automatic coffee machine and wants to keep it in top condition. It's definitely worth taking the time to watch and learn!"
As soon as I heard the sound in your video, I knew I was in good hands. My DeLonghi started making the same noise out of nowhere. We found a machine screw jamming up the grinder. Must have come from the bag of coffee beans. Thanks for the great video!
Thank you so much for the instructions, I worked in my Delonghi Magnifica ESAM4200. The model is slightly different but I was able to remove a piece of wood I believe that was stuck in the grinder. Gonna move away from Lavazza after this!
Thanks for the walkthrough. My ECAM22.320.SB had a stuck grinder and I was able to unjam it following your help. Broke off a few plastic tabs taking the cover off though, as mine has hinges yours does not seem to have. All good once screwed back together.
Best video on Delonghi coffee machine. With your video, I was able to fix ours. That saved us $850 bucks.
Thank you so much for posting this repair. The detail of the complete repair was excellent.
This was very helpful, i had some kind of hard residue stuck in the grinder and managed to get it out by watching this video. Thank you! ☕
Thanks a lot for your great instructions. Saved me at least 80 € on parts and a good morning coffee!
Your video saved our weekend, thanks a lot 👍
Super video. I just used this to fix my own Delonghi Magnifica Smart S (ECAM250.33). Very straight forward instructions.
Thank you for making this video. It was a big help with the grinder issue I was having with my coffee machine!
Probably the best step by step DIY vid I've seen on utube, saved me a fortune mate thank you!
Thanks a lot. Safed my morning with coffee.
Thank you so much for the video. There was an issue with the grinder and the coffee tastet completely bland, now everything is back to normal and I couldn’t be happier.
Thank you for your generosity!! 👍
Jak Ty mnie imponujesz Panie 👏👏
Great video. I found a stone too, in my 5 years of using this apparatus it was a first stone ever, have to be more careful when pouring beans in I guess.
Super Einleitung. Bei mir hat die Maschine erst nach zweiten Lauf Kaffee gemacht. Danke schön.
Thanks very much for posting this. My grinder had jammed on my Magnifica EVO and turns out it was a piece of plastic 14mm long (which presumably was in a bag of beans).
Once I had removed the top burr I could extract the foreign object. So no need to remove the lower burr with all the complication that involves.
Thank you so much!!❤
a tip for a FASTER REPAIR:
I just did the steps up to 1:50min and vacuumed out the dirt. done. so the machine was repaired without unscrewing the grinder. 🎉
Thank you very much for a video, I was just about to buy a new machine when I came across this. You just saved me £500!!!
@Robert Krupa Such an error can occur with any machine with an integrated coffee grinder.
Hey thanks to your video i could repair my own De Longhi! Very useful!
Thank you this got my machine back up and running
Vielen Dank für die Super Anleitung. Hab sogar ich geschafft. Alles läuft wie neu.
Hi, your video worth it and saved our Christmas this year! Thanks for sharing your practice!😊
thanks for this video ! awesome work
This was great help for me!
Thank you very much, very helpful for solving the stuck grinder!
Excellent video which will allow me to repair/unblock my grinder!
Thankyou Sir, I have a different model but it made the exact same noise as this at the beginning- thanks to your video I had an option to try and I'm now drinking delicious coffee :-)
‘Magnifica’ video and explanation. A credit to you for very clear and precise instructions. Good focus. Hope you do such good work for other machines. Thanks you.
Merci bcp, très utile, j'ai suivi pas à pas et ma de Longhi est repartie ! Thanks !
You made very clear and understandable video. Thanks a lot. I able to repair my coffe buddy . You saved our day . thanks
Super helpful Video.
Was able to repair and saved the expensive service!
Many Thanks 🙏
thanks a lot I was looking for such a video for days !!
Amazing video!
Thank you!
Super video, thank you!
Agree with the last comment. You saved me a service call and most importantly don’t go a day without my coffee. Thank you
Grazie per il tuo video, sono riuscito passo passo a riparare la mia DeLonghi Ecam automatica 👍👍👍👍
Hi and thanks all the way from Australia.
You have helped me very much. Thanks for your video's.
Best "how to" video on UA-cam. Thank you.
Hi. Thank you!!! I just done my machine!!
Un grand merci pour cette vidéo. J'ai pu régler le problème rapidement.
Exactly what I needed. Thank you
Очень полезное видео 👍
Thanks a lot for this video! Helped me fix my machine!
Great video thank you. First time around,at 6:49, I didn't have the grinder wound off completely. So the outer ring wasn't seated properly. But apart from that I think I did OK 🙂👍.
The tutorial at the end for calibrating the grind was excellent!
Very good video! I have my capuccino again !!! Thanks!
Thx little wood peace bloked my grinder. Exellent video step by step and helped restored my bloked Machine :)
Great detail, unclogged the chute and back in action!
Thank You. This helped me a lot
Thanks very much, I needed this for the ETAM Authentica model, the grinding section is similar enough to be incredibly useful!
Good to know. With this info I will open up my autentica model as well
Hello, thank you for this fantastic video. Our problem is solved and the machine works fine again. 😊
Thank you. You save my morning coffe.
Thank you so much for the video! It helped a lot!!!
Gut gemacht.
Thank you for this video, DONE. Many thanks and good luck.
fantastic video! I have a dedica machine, I like both medium and dark beans... so someday I will have to clean it... thank you!!!
Great video. I fix my autentica. Money saved. Thank you.
Thank you, it helped a lot!
Thank you - this video really helped!
Best video I've seen, thank you so much
Awesome video!! Now my machine is working like new
Thanks for video!
Great instructions - the one to watch😊
Thx so much. The best explanation on yt, easy to understand and very good created with only some important marks. Go on like this☘️
What a beautifully crafted video. Well done and thank you
Thank you very much! you are a coffeemakersaver :)