Any day that includes watching a new Scott Brown Carpentry video over a lunch break is a good day. Much appreciation from Prince Edward Island, Canada.
Everything you do is so clearly explained and beautifully shot! Always the perfect blend of explanation and showing how the work is done. I really admire your skills as an editor.
I watch alot of carpentry/construction videos on here. I like watching the videos where the guys are using the tools and different ways to use the tools. You are the best at that. I've learn so many ways to get more use out my tools watching your videos. And watch for the new vids on Fridays. Keep up the awesome work.
In anticipation: In our current house, built around 1890, I put in a new bathroom with a pocket door to save space. It worked so well that I put one in a toilet in the first floor as well. (Also moved a traditional 4 panel door from the second floor to the kitchen so I can say that I can hang a door in two ways.) Thanks for the videos.
I really appreciate the videography, it makes me feel like I'm there. I say you're not a builder until you've hit a pocket door with a nail or screw through the drywall or trim.
ha!! showed that cut blade trick to the apprentice yesterday its a goodie, but that long bit is definitely better, i also chisel split the top of the board to minimise rick of cracking the nest above then can cut out nails in top bit😎
Thanks Scott. This is exactly what i need to do on my place. I've done a lot of research on in how to do it, but this simple video is probably the push i need to give it a crack!
An excellent solution for trimming the attachment on a multitool! You remind me of me) Thank you very much for your inventions! I wish you career growth and look forward to more inventions from you. Best regards, your subscriber!
Dropped 2050nzd on a full M18 track saw setup including 2700, 1400, bags for both, bag for the tool, makita quick clamps, 48 and 24 teeth blades, and the bare saw itself. Running with 3Ah 21700x5 DeWalt battery and adaptor which should be fine for most intents and purposes. Will probably get a second 1400 rail and cut it into 31 and 24 inch pieces for those smaller jobs/cuts in smaller places. Waiting on the tool and makita 3000mm bag so I can pick up the 2700 rail and keep it safe. Can't wait for my next sheet goods project. Baller gear.
Thanks Scott, one of the next jobs on my list is replacing dodgy weatherboards. Looks like a multi tool blade is about to be sacrificed for the greater good.
Scott, I don’t know building regulations or practice, but a gap of approximately 5mm between the bottom cladding and weatherboard has become the norm here. I lets: Gets you between with a brush for paint, some airing behind very exposed area for rain, lastly there cannot be standing water - it will air dry given a minimum 15° bevel on both the bottom cladding board and the weatherboard. Otherwise top notch as always!
Greetings from Quebec. Pretty goddam slick trick with the vibrating tool Kiwi Boy. Never seen that. Best regards to Ray and "Jiss". Please carry on with the great work and really charming and facinating videos.
Hi Scott, may I ask for your advise and help? I wanted to install an Outdoor Exterior Wall Light on the Outside Garage Door Sides. I have a weatherboard cladding that is very challenging to put the light on to. What is the best way to do this? Please advise. Thank you very much!
Probably not so bad under the eave but on my 2 storey place the joins are a lot more exposed so I put flat soakers over the joins. I wish I had done that in more places as they are really showing where I hadn’t after about 1.5 years already. I’ll go back and add them when I feel like being up a ladder again.
Near the ends of boards you should either pilot drill the holes or (the best way, I was taught this many years ago) blunt the 'point' of the nail with your hammer nail in, don't ask me how it works but it does
Hey Scott can you tell us a bit more about your ear protection please. Are they radio or Bluetooth enabled or just good old noise canceling headphones. I ask as I need a pair. Thanks
That segway (is that how you say it??) to the next episode was briliant!!! A bit of a cliffhanger on the split in the old weatherboard with the last nail, how did you deal with that? Don't assume you are the caulk and paint kinda guy.
I have been watching your journey from the beginning. I am curious why at the very least you are not flashing the last course of siding (weatherboards?) I know New Zealand and the USA have different building codes but no house wrap or other material under siding???
Saw the title, realised which room it was, thought "THAT'S where the water was going from the old sink Jess..." Not sure it actually was, but I think about that moment quite a bit. Water mysteriously disappearing heebie jeebies.
How did you manage to paint without getting it on you? Sometimes I'm interested in what time of year your recording occurred. Summer 2024, winter 2023 etc.
4:13 🐝squirts amazing hypersonic neon-green micro-stream bee-bum excreta (...an act in want of a bespoke emoji) ...and of course everything else was top shelf per usual also.
You need to buy yourself a ball magnet, im a plumber and use it all the time to find screws and nails on plaster or weather board, finds studs so quickly
You mean a shiplap with tongue & groove?They've completely captive. You can circular saw cut it along the face, with a slight bevel upwards for clearance, and put screws in with the heads proud to pull the top half of the board out with a pry bar. But you'll have to remove the back of the groove on the new one to get it in.
G,day Scott and Jess from Sydney Australia. I'm shocked at you using the Festool drop saw aka "the droppy" to cut weatherboard. I would have applied primer all round on the sill, prior to installation. Gardening gossip Bee's are busy and doing their job of pollination. Don't forget a Q tip. Give each stigma a little tickle a cross pollinate if you feel like it. 🕵️🌺🐝
idk ive not yet seen your new vids Scott Brown CarPentry vids on your youtube channel in the Comments Section its cuzzy rory aka cuzzy rory aka cuzzy customs aka uncle rory ive got few new ideas for my setup off my dream bedroom makeover aka shed bedroom makeover into my dream bedroom makeover
Fixing the rot, fair enough. But what is the point in going through all the trouble of putting a little block under the bottom plate, and then bolting the plate to that block?
an have a spare store room too as well for another bedroom if that fits into the same space or fit out as we building it for me etc what doing u cost for building working etc tbh massages me back in the comments section on your youtube channel Scott Brown CarPentry idk am learning about carpentry building an tools i need too getting as well for myslfe
idk looking for few barn style sliding doors for my dream bedroom makeover etc on facebook marketplace or pocket doors sliding ones too as well an few doors for the fit out off my dream bedroom makeover shed bedroom makeover etc. i been in touch with u Scott Brown CarPentry Rorys my name etc
Any day that includes watching a new Scott Brown Carpentry video over a lunch break is a good day. Much appreciation from Prince Edward Island, Canada.
Hehehe, and 2 hours later in Manitoba even xD
Ditto from the other side of Canada, Vancouver Island.
@@jasonarthurs3885 Cowichan Bay 🏝️
sup Shawn does this mean we should be friends???
"in the next exciting episode'' i love that! Its like a tv show just a teaser on what to expect.
Everything you do is so clearly explained and beautifully shot! Always the perfect blend of explanation and showing how the work is done. I really admire your skills as an editor.
I watch alot of carpentry/construction videos on here. I like watching the videos where the guys are using the tools and different ways to use the tools. You are the best at that. I've learn so many ways to get more use out my tools watching your videos. And watch for the new vids on Fridays. Keep up the awesome work.
2:00 the joys of reno discovery... ...leads to more reno work.
I felt that weatherboard split in my gut 😂
When u know u should have pre drilled it but u usually get away with it 🤦🏽♂️
same here lol
In anticipation: In our current house, built around 1890, I put in a new bathroom with a pocket door to save space. It worked so well that I put one in a toilet in the first floor as well. (Also moved a traditional 4 panel door from the second floor to the kitchen so I can say that I can hang a door in two ways.) Thanks for the videos.
My Saturday mornings prior to tackling my own house Reno in AUS 😊
Great technique with the oscillating saw blade !
I'm going to use that one tomorrow!
Never seen a bee having a shit before. David Attenborough and team, eat your heart out... ❤
I really appreciate the videography, it makes me feel like I'm there. I say you're not a builder until you've hit a pocket door with a nail or screw through the drywall or trim.
Cutting that blade is a brilliant tip. Thanks Scott
Nice trick for cutting the top edge of the siding board ends. Very nice! I won’t say how I did it the other day, not nearly as elegant.
This is some old school SBC. Absolutely loved this one!
ha!! showed that cut blade trick to the apprentice yesterday its a goodie, but that long bit is definitely better, i also chisel split the top of the board to minimise rick of cracking the nest above then can cut out nails in top bit😎
3:22 The fish the guy catches is amazing!!
Yellowtail Kingfish. Found throughout Australia and NZ. Fantastic eating!
@@justinpreidReally good. Up there with coral trout and sweetlip.
Screw that, keep the channel focused on carpentry and not the killing of animals.
SB you are an artist. Thank you for your content!
That Kingi was worth a phone, for sure!
The worst part is not being able to send a photo to your mates.
He has a whole video of it on UA-cam. He'll be fine.
Thank Scotty Jess and Ray I had to complete a repair similar on our home and wish I had see this video last week. Cheers
I’ll definitely be using the modified blade tip. Thanks!
Thanks Scott. This is exactly what i need to do on my place. I've done a lot of research on in how to do it, but this simple video is probably the push i need to give it a crack!
So good to see your handy work SBC in front of the camera and behind the camera. It is a joy to watch! 😎
Thanks for this video, I went back to it today to see some scenes again, I did the same on my house today :)
An excellent solution for trimming the attachment on a multitool!
You remind me of me)
Thank you very much for your inventions!
I wish you career growth and look forward to more inventions from you. Best regards, your subscriber!
Good job, Jesscasso.
8:23 Another Pro Tip! I see what you did there! Love it!
Maybe should have used the Ryobi drill from last week to drill a pilot hole?
The amount of different tool brands scott uses this video is great, i saw hilti, makita, bosch and is that a hikoki on the ground at arround 3:00
You missed his festool chop saw
The bosch and hilti multitool may as well be the same tool. Both battery platforms are only doing the slim 4ah, big 8ah, big 12ah.
I just like the calmness of those vids :)
❤pocket doors...so much fun😊
Saved this for my project next holiday. Great work again!
Dropped 2050nzd on a full M18 track saw setup including 2700, 1400, bags for both, bag for the tool, makita quick clamps, 48 and 24 teeth blades, and the bare saw itself. Running with 3Ah 21700x5 DeWalt battery and adaptor which should be fine for most intents and purposes. Will probably get a second 1400 rail and cut it into 31 and 24 inch pieces for those smaller jobs/cuts in smaller places. Waiting on the tool and makita 3000mm bag so I can pick up the 2700 rail and keep it safe. Can't wait for my next sheet goods project. Baller gear.
Challenge, getting the TSO products square out of the US without paying two arms and three legs. Can Gaston help with this?
The garden looks great Picasso.
Sweetas episode Scott.
Can’t tell you how happy I get when I see a new upload
Thanks Scott, one of the next jobs on my list is replacing dodgy weatherboards. Looks like a multi tool blade is about to be sacrificed for the greater good.
Scott, I don’t know building regulations or practice, but a gap of approximately 5mm between the bottom cladding and weatherboard has become the norm here. I lets: Gets you between with a brush for paint, some airing behind very exposed area for rain, lastly there cannot be standing water - it will air dry given a minimum 15° bevel on both the bottom cladding board and the weatherboard.
Otherwise top notch as always!
Love your videos watching from Bradford England thanks guys
I did wonder about you and pocket doors, Scott. Especially after seeing Rich screw through into one of his from the garage🤣🤣
Just watched the video of Perkins builder brothers calling you out! Such a popular guy
What video?
Think Scott is doing the same... Pro tips a plenty!
9:51 slightly blunt the head of the nail by couple taps of hammer to avoid split?
I use stainless steel screws after drilling a hole with a countersink.
the great remodeling adventure-saga-opera 😎👍🏽☺ carry on!
When I first bought the green Bosch plug in multi tool in 2006 I called it my magic tool. How did we cope without them?
This video didnt show up in my subscriptions page, few times in a row that shappened with your videos for some reason!
Greetings from Quebec. Pretty goddam slick trick with the vibrating tool Kiwi Boy. Never seen that. Best regards to Ray and "Jiss". Please carry on with the great work and really charming and facinating videos.
Hi Scott, may I ask for your advise and help? I wanted to install an Outdoor Exterior Wall Light on the Outside Garage Door Sides. I have a weatherboard cladding that is very challenging to put the light on to. What is the best way to do this? Please advise. Thank you very much!
Gonna go and buy and angle grinder and longer blades today, thanks!!! I was also told to cut the ends of the board at a 45 as well?
I would say bevel 3 to 5 degrees to make the front tight.
I find using a curved multi-tool blade makes cutting straight lines much more accurate - I have no idea why!
Do you think a bit of flashing under that last weatherboard would have been a good idea?
Thanks!
Great production/editing 🎉
Probably not so bad under the eave but on my 2 storey place the joins are a lot more exposed so I put flat soakers over the joins. I wish I had done that in more places as they are really showing where I hadn’t after about 1.5 years already. I’ll go back and add them when I feel like being up a ladder again.
I didn't like them either until I found soft close mechanisms for pocket doors.
How did you fix the split board? I find wood filler always cracks
Could you please share which socks and work boots you use? Any feedback? TIA!
Near the ends of boards you should either pilot drill the holes or (the best way, I was taught this many years ago) blunt the 'point' of the nail with your hammer nail in, don't ask me how it works but it does
It cuts the wood fibers instead of wedging them apart.
@@hedge685But it doesn't split the end of the board like his did.
@@ronmurphy4234 The blunt nail tip severs wood fibers rather than the point tip wedging between fibers causing a split.
Hey Scott can you tell us a bit more about your ear protection please. Are they radio or Bluetooth enabled or just good old noise canceling headphones. I ask as I need a pair. Thanks
Killed me with the pocket door outro
Your beard looks very good.
What do you use to seal the ends of the boards? Simple primer or something special? Thank you
That segway (is that how you say it??) to the next episode was briliant!!!
A bit of a cliffhanger on the split in the old weatherboard with the last nail, how did you deal with that?
Don't assume you are the caulk and paint kinda guy.
Great watch...thanks.
I have been watching your journey from the beginning. I am curious why at the very least you are not flashing the last course of siding (weatherboards?) I know New Zealand and the USA have different building codes but no house wrap or other material under siding???
what's with the orange on the boards? some kind of wood treatment, or was the house orange?
Those calfs looks like skater’s calfs . Good content! If my supervisor see me cutting the blade like that he will kill me 😅😅😅😅
With such a short length, I was wondering why you didn't just replace the complete row of siding instead of patching it?
Pocket/sliding doors are easy, just get yourself some air wedges they make installation so much easier.
Saw the title, realised which room it was, thought "THAT'S where the water was going from the old sink Jess..."
Not sure it actually was, but I think about that moment quite a bit. Water mysteriously disappearing heebie jeebies.
Hey Scott do you use Vinyl Wall Paneling Boards in there?
How did you manage to paint without getting it on you?
Sometimes I'm interested in what time of year your recording occurred. Summer 2024, winter 2023 etc.
Did that Bee have a dump on cam
What species of wood for the weather board?
Why the Bosch multi tool instead of Makita ?
4:13 🐝squirts amazing hypersonic neon-green micro-stream bee-bum excreta (...an act in want of a bespoke emoji) ...and of course everything else was top shelf per usual also.
Scott you should join me at a PDA meeting sometime, we at Pocket Door Anonymous will not judge.
You need to buy yourself a ball magnet, im a plumber and use it all the time to find screws and nails on plaster or weather board, finds studs so quickly
"Pro tip?" Somebody's been watching the Perkins Brothers!
Does this method work equally as good if the boards have tongue and groove?
You mean a shiplap with tongue & groove?They've completely captive. You can circular saw cut it along the face, with a slight bevel upwards for clearance, and put screws in with the heads proud to pull the top half of the board out with a pry bar. But you'll have to remove the back of the groove on the new one to get it in.
Yeah, that's what I was wondering about. Getting it out isn't a big deal, but getting the new one in is tricky.
Scot never admit your afraid of pocket doors -They smell your fear !
Life was way harder before the multi tool.
I'll say what you didn't at the end, with that split."oh fk it"😂
Oh please do a "high end pocket door" tutorial ...
😊
G,day Scott and Jess from Sydney Australia. I'm shocked at you using the Festool drop saw aka "the droppy" to cut weatherboard. I would have applied primer all round on the sill, prior to installation.
Gardening gossip
Bee's are busy and doing their job of pollination. Don't forget a Q tip. Give each stigma a little tickle a cross pollinate if you feel like it.
🕵️🌺🐝
Ah, the Multi Tool, the most annoying sound out, but when you need it, you need it!
idk ive not yet seen your new vids Scott Brown CarPentry vids on your youtube channel in the Comments Section its cuzzy rory aka cuzzy rory aka cuzzy customs aka uncle rory ive got few new ideas for my setup off my dream bedroom makeover aka shed bedroom makeover into my dream bedroom makeover
Plumbing pipe in the way? But rays got long arms
It wasn't Jess your finest work, it was also your Finest Hour. 🙂
Instead of using a grinder to cut the blade of the osciliating saw, use tin scissors👍
Pre drill the ends! Especially rimu
Fixing the rot, fair enough. But what is the point in going through all the trouble of putting a little block under the bottom plate, and then bolting the plate to that block?
the sound out of Scott at the end when the wood split 😀 or rather 😞
Is it just me that find’s Scott’s excellent use of PPE super sexy? 😅 love a safety first tradie 😘😎
RIP that dude's phone but at least he's eating well!
Scott Brown! You should practice your hammering nails? 😂🤣 says a Scotsman who can! And I can hang doors? 😀 👍
an have a spare store room too as well for another bedroom if that fits into the same space or fit out as we building it for me etc what doing u cost for building working etc tbh massages me back in the comments section on your youtube channel Scott Brown CarPentry idk am learning about carpentry building an tools i need too getting as well for myslfe
idk looking for few barn style sliding doors for my dream bedroom makeover etc on facebook marketplace or pocket doors sliding ones too as well an few doors for the fit out off my dream bedroom makeover shed bedroom makeover etc. i been in touch with u Scott Brown CarPentry Rorys my name etc
Scott brown is such a fkn cat
dude, my apologise! but those boots with shorts are like wearing socks with sandals!😂
Exatamente
Allgood Tully you’re family is worth millions bro, they’ll buy you another phone 😂