HC-05 Bluetooth Module | Change Name and Password | AT Commands
Вставка
- Опубліковано 1 жов 2024
- Hey friends in this video I will show you how you can change the Name and Password of your HC-05 Bluetooth Module
Visit my Website to Download Codes and Circuit Diagrams:- www.viralscien...
Materials:-
Arduino UNO
HC-05 Bluetooth Module
Breadboard
Jumpers
Follow me on:-
Website:- www.viralscien...
Facebook:- / viralscience20
Facebook:- / viral.dodhia.73
Instagram:- / viral_dodhia_
Twitter:- / viral_science_
--------- VIRAL SCIENCE © ----------
RX to RX , TX to TX ? Are you serious?
Actually yes. Its not actually “RX to RX”, its “RXD to RX” which is essentially “TX to RX”. The arrows says it all. Bt module labeling is dumb and stupid
@@eigenman2571 The diagram in the video shows it as "RXD -> RXD" and "TXD -> TXD". And the arrow on the Arduino in the diagram shows the TXD communication going away from the device to the Bluetooth module where it ends up at the TXD on the module (which would be transmitting from the module). As when, it wouldn't work.
For AT mode RX to RX and TX to TX but for use for communication RX to TX and TX to RX
Hello there
video is very descriptive
I try the same way but does not send AT commands to the module
Me too brother
If somebody is getting Error:[0] for all the AT+NAME and similar commands, just add a question mark after ... AT+NAME? ... etc.
SAME
Connection change karo
Thank you
When i type AT, it shows OK but when i type any others thing like 'AT+NAME', AT+PSWD, AT+VERSION, ... its showing nothing
did you can fix it ?
when I clicked AT it is showing no answer
Bhai apne kya solutions kiya
use AT+NAME? with question mark after a command it works for me when I do AT+NAME only without question mark it throws an error specifically ERROR[0]. Hope it helps!
sir I am using plc2303 and hc06
but not getting any response for AT commands
thank you verymuch. But, i'm confused that why TX of arduino to TX of module. In common(other website) TX to RX?
I will communicate 2 hc5 in my project. But I can't do it. I don't know which commands should I use. Could u help pleas?
WRONG FUCKIN CONNECTION
If Bluetooth LED doesn't blink in any way after connecting Arduino UNO/Nano to pc, then connect EN to 3.3V and VCC to 5V
Can you help me please:((, my HC05 led doesn't blink in both way :(((
When I type AT in Serial Monitor , it shows OK .. But after I write AT+NAME , it shows ERROR:[0]..... why is that ..... Plz tell.
use AT+NAME? with question mark after a command it works for me when I do AT+NAME only without question mark it throws an error specifically ERROR[0]. Hope it helps!
use AT+NAME? with question mark after a command it works for me when I do AT+NAME only without question mark it throws an error specifically ERROR[0]. Hope it helps!
use AT+NAME? with question mark after a command it works for me when I do AT+NAME only without question mark it throws an error specifically ERROR[0]. Hope it helps!
Sir, i did anything of AT command, but why my light of the bluetooth HC_05 jusp keep bling 2s, not bling fast after done AT. welcome any hepls. Thank you all
Bro my Bluetooth module is not connecting
In my case hc05 module need 5v on vcc.
my HCO5 receives command AT and response ok .but when i type other commands it always show ERROR:[0] please help me
Try AT+VERSION? With question mark
Bhai my hc05 new module is not working first time. What to do? Please help me 😢😢😢
Bro when I click on pair in my mobile it was showing can't communicate with it what should I do please help me 😢
Good video 👍
Bro which software is used you? For making circuit....?
FRITZING
;)
@@LTACY ok bro
Bro my hc 05 module was turning of automatically and my bluetooth car is going out of control
RX to RX and TX to TX I think it's wrong
Rx to tx and tx to rx
Thanks ALOT !!!
I did everything on your tutorial, when I write AT, nothing
THANK YOU very much i had problem to hc_05 answer and when i see your video my problem is solving
BROTHER I AM GETTING ERROR:[0] FOR OTHER CODES EXCEPT THE AT ONE KINDLY HELP ME !
I Tried that tutorial, but the text out is "?x", I can't change name & password :(
My port function is not shown on ardinoIDE
Thank you. It didn`t want to display name in serial monitor, but I was able to change it anyway.
Why is mine not showing the "OK" after AT my ports and board are correct and the baud rate and the other stuff
Same problem
I did the steps which u told in the video but when I exited the module forgets password (not name) mine is HC-05 pls tell me what should I do
The AT+POLAR command is not working. Tried 3 different modules and also the USB serial convertor. All other commands are working fine. Any help?
Wow! Amazing I'll try this😊😊
AT+NAME="WORKING" works but AT+PSWD="5555" doesn't 😥 Please help
Make a tutorial on Bluetooth audio module with the same HC-05. Dont know if that is possible.
Great Tutorial Dude! Bohot Khoob!
Is it possible to work for ESP8266?
Please l want to control 10 dc motors separately with a programmable board. Who can help me with the best board to go for
no light is coming on the Bluetooth module
it doesont says ok
Thank you so much this was giving me a headache before I stubbled on this video :)
Me too HAHAHA
Bro for me it's not working,can you please help me bro
Cok guzel video ben denedim oldu ;)
hello sir whenever i type AT+NAME it prints out ERROR :[0]
For me as well
@@proraj476 ok so ask name at command is AT+NAME? AND FOR ASKING PASSWORD command is AT+PSWD?
Edit:
And to set name and password
Comands are like AT+NAME= "XYZ"
AT+PSWD="7890"
and you have to change name after changing password to save the password otherwise the password will remain same
Hope this will help you
@@aseemparambennykukkarlive4501 Thank you very much sir, it's working now
@@aseemparambennykukkarlive4501 it is not working in HM-10 BLE Module.
@@sagarsolanki7996 i dont know how hm 10 ble works so i have no idea
sir i did all the steps correctly but when i send AT+NAME / AT+PSWD it just gives "ERROR:[0]". plz tell me what i can do to solve this.
SAME
There is no KEY pin on my HC-05 module, instead there is a pin named EN. So what to do then?
It is the same
AT command not work?
Me to bro
Hi bro first viewer
You need an arduino code for this to work!
My module is not replying
How to change the buad rate of Bluetooth module
Sir , my hc05 is malfunctioning from the past few days. Whenever it comes in the range of a mobile device having bluetooth turned on it starts havinga fluctuation in it's blinking and loses connection. Please please please help me 😭
Wowwwwww!!!!!!!!? Amazing awesome
👍👍👍
Devices designed via Bluetooth hc 05 are vulnerable to hacking
It is possible
I dont have this button
Will arduino nano also will have some pinpouts
Is there any way to change bluetooth name using app
Wow very nice
Merci beaucoup. Cela a fonctionné pour moi.
thanks for the info
Nice job ❤❤❤❤
Thanks a lot sir
Can we also do this with Arduino nano
i which website do we make diagrams?
I can only connect the bluetooth HC05 vertically on bread board.how did you connected it horizontaly.Did you bend the leg or resoldered?
DESTROYED A UNIT DOING THIS.
just for sure. TX to TX and RX to RX, or TX to RX and RX to TX?
Please, can you tell me if this method is available ?
Hi,
Is it possible to change the BT password through a BT command?
Thanks
Bro. My bluetooth module rejecting when connecting
Thank you !!!!!!!
I an #crinnovator
Здравствуйте. Спасибо за урок. Скажите, пожалуйста, возможно ли с помощью модуля hc-05 связать ноутбук с платой ардуино, работающей в режиме лазерного гравёра? Если возможно, помогите литературкой или ссылками. Спасибо.
Hi i want to ask what website do use to create your diagram ?
maybe use fritzing
May I ask you a question?
Good job
😇👍i
Hey bro
What program are you using to make circuit simulator?
I'm not sure, but I think it's Fritzing
Really thanks bro
thnx
Can Auto pairing with iphone?
no there is no auto feature "you have to touch the hc05 from your pair list in phone"
@@arletpaz8010 without bluetooth terminal?
🙌🙌🙌💥💥💥😌
Nice video !
Tq bro
good job bro👏👏👏👏👏
Thanks this was really helpful
Which software used
you need to use a voltage dividor!
Супер я начинающий ардуинщик и мне это очень помогло!!!🤩