How complicated is a brake line replacement?
Вставка
- Опубліковано 4 бер 2019
- Have you ever wondered what is involved with replacing brake lines on a vehicle?
Our Southwestern Ontario Canadian winters mean snow and to combat that issue salt and deicer are applied to all major roads and highways. This inevitably means one thing for the undercarriage components of all vehicles that travel our roads... They will rust.
Brake lines are usually exposed to the elements at some point in the undercarriage of the vehicle. Some modern vehicle manufacturers have gone to a coated brake lines to try to prevent this issue from happening, but over time exposure will still cause corrosion and eventual failure of the component.
There are many components in the hydraulic system of your vehicle's brakes. The brake master cylinder and brake lines are what hold the hydraulic fluid and allow transfer to the brake calipers or in the case of drum brakes, the rear wheel cylinders.
Typical cost of brake line replacement is 2 to 5 hours labour depending how complicated the system is and how much of the brake lines are being replaced. In the case of some vehicles a scanner is required to operate the ABS controller to properly "bleed" the brake system of air.
some manufacturers offer premade brake lines through the dealer that save time (in most cases)
on installation. The trade-off of course is the cost of the lines themselves tend to be much higher in price than the shop manufacturing the lines from scratch.
Other vehicles may require a reset of the brake system again with a programming scanner depending on what components of the hydraulic brake system are being addressed with the brake line replacement.
Like our Videos?
Check out Mikes Book:
CAD Link: www.amazon.ca/dp/B0CFCLSHDY
Use these if you are outside Canada.
USA Link: www.amazon.com/dp/B0CFCLSHDY
UK Link: www.amazon.co.uk/dp/B0CFCLSHDY
AUS Link: www.amazon.com.au/dp/B0CFCLSHDY - Авто та транспорт
Yes Ontario!!! Should post more videos guys
Wow that's a lot of salt! It gets pretty bad here in Ohio too, this is why everyone should have a winter beater!
Mine is leaking over the tank
Whats the labour cost for this job?
I had a shop quote me $1000 altogether, but only $500 if I do it with my fuel tank. My fuel tank is starting to corrode.
My dealer quoted me $4000 for this job…
Carlos... not sure where you are... but if you're within 100km of our shop I can almost guarantee we would be cheaper... just saying... 😒
@@UrbanAutomotive01 hes not kidding, Mercedes also quoted me $4000 for my 2007 C280.
@@Loveinabottlee that is just insane 😳
We would be happy to replace them for you if you are in our area at less than half that price... all in... including tax... with a 3 year 60,000km parts AND labour warranty on the job. And... that's CANADIAN dollars 😉
That is crazy... It does not take that much time to do this kind of work.
@@davidestateyeah hoping to do it myself, i reckoned ill use a couple of days. (Im not a mechanic) and i dont think it will cost me more than 200$.