@@UPCarTuto fala ae blz, sou fã seu man, fiz meu próprio retrofit através de assistir seus vídeos, entre outras coisas legais que vc posta. Sobre a cola ele é holandês e a cola é uma tal de Bison kit e como uma super bonder gel... www.bison.nl/nl/product.2276
@@UPCarTuto eu, particularmente iria de silicone tradicional da TekBond um pinguinho em cada extremidade do vermelho que aguenta até 316° intermitentes... flw abs
beautiful tutorial friend, so get me one doubt that connection (wire) is left throughout installation is the one that makes the function , High / Low ?
Hi uit Brazilië Ik heb een twijfel Om 4:45 u zowel de bovenste uiteinden van de lens stuk metaal en op 05:52 als je het zal vast weer snijd de beide bovenste uiteinden nog steeds er weer. Dus wat is het punt van het snijden ?
For a car that does not have projectors from the factory, after you fit the aftermarket projectors can you use the signal (usually the high beam) without having turned the headlights on?
HI, See the discription of this video for the specifications. In this video we used these bulbs: 5500K XB35 D2S bulbs (See link below) retrofitlab.com/products/aharon-d2s-xb35-xenon-hid-bulbs?_pos=2&_sid=936f61322&_ss=r
@@Retrofitlab thank you Regarding wiring, how should we do it? I didn't see the explanation in the video knowing that the people who have this model car have an original H4 bulb power supply
Er zijn verschillende manieren om dit te doen, bijvoorbeeld het originele lichtbeeld op een stuk muur markeren met tape en later de projector hierop afstellen, in de koplamp zit die al bijna horizontaal door de adapterring en de projector pas na het afstellen helemaal vast draaien. Dit kan ook op een werkbank. Of het kan ook door de koplamp horizontaal neer te zetten (vaak is er wel een horizontale lijn op de reflector of de behuizing) en dan he lichtbeeld ook weer horizontaal afstellen, op een horizontale lijn op de muur of een laser etc.
Maybe not sharp but used to this view. Few days ago I just put exactly the same lenses to polo 6n2 (bought from Retrofitlab of course) The very first thing which I wanted to do was cut off those mountings because 3" lenses are just hughe. So for now just need to do wiring for hi/lo beam, and the night driving become a pleasure :) In the meantime I'm doing an interior light fade out turn off, will see. gg.gg/74qi7
Hello guys! I have a doubt with these system; if you are driving at the day with the sun and everything and everything, and you have the lights off (because you are driving at the middle of the day) and you want to turn-on the high beams lights for a second just to make a sign or something like that, (remember, lights are off) my question is: it does turn on the high beams? (because you take as "high beam" the plate for the projector and not the original high beam light). I hope you undersand my doubt.
Já deveria vir de fábrica assim, fica mais bonito, e além disso, pra versão topo de linha do TSI poderia vir com Angel Eyes, nas outras versões poderia ser oferecido como opcional.
Hello guys! If u can help me with some advice about my Audi a4 b5 regarding to my headlights i can't get the plastic lense off only with a hairdryer and box ...that adehesive is to thick ,wont even budge . Can u please tell me what to do ?
ola amigo, tenho 2 perguntas pra voce: gostaria de saber que tpio de cola é esse que vc utiliza nesse video, qual a que voce recomenda e a outra é onde voce compra os projetores ?
que tal dond te ubicas y saber si vendes los faros x que necesito unos para el jetta a4 asi con proyector oh si puedes subir un tutorial te lo agradesco
Hi, Im looking foward to install projectors on my Mitsubishi Lancer. My first doubt is about the bulb of the projectors are H1 and my car uses HB4; how can i use or adapt the H1 bulb to fit in my car that uses HB4? Another question is, because of the law here in brazil, i cannot use xenon all the times, is it possible to use a halogen bulbs like Phillips Diamond Vision inside the projectors? Thank you.
+Retrofitlab Awesome! Thanks for the answer. Whats the name of this black strip glue that you use to mount the headlight after the projectors installation process?
Hello bro, please help me out. currently m using the same d2s projector in my hyundai grand i10. can u please tell me which bulb to use? through which bulb i can get d maximum amount of light? d2h or d2s? m having d2h cnlight 5000k bulbs nd m ok wid them! Please suggest which one should i go wid?
+Retrofitlab Sur ma FZ8 j'ai une seule ampoule H4 et quand je vais la replacer la D2S je vais plus avoir de phare uniquement le code , vous avez une solution pour avoir le code et phare ?
Nice work! Do you sell the headlight with the kit installed? If yes, can you ship a pair of these to Brazil?? I'm looking for a plug&play solution...take in advance
Aquilo é um primer pra plásticos. Adere melhor a tinta. No Brasil a Colorgin já tem uma tinta pra plásticos na cor preta. Eu usei ela nos faróis do meu fiesta mk5 e apliquei por cima a colorgin alta temperatura preto fosco
how do you adjust it horizontally? or does the adapter plate do that? i have a 9007 headlight but there isent a plate for mine... so ill have to thread it on a bit then manually tilt it then tighten it dont i?
And the cleaner with xenon water? Here in Brazil it is mandatory to have this item under the lighthouse. Like the VW UP does not have this accessory , here we would be fined. But congratulations on the good work !!
so you cut the adhesive off then just press it back together? lmao your going to get a LOT of water build up in there... at least heat up the glue or even melt it, then reseal it properly so you dont get leaks, im just really confused lol
Hello bro, please help me out. currently m using the same d2s projector in my hyundai grand i10. can u please tell me which bulb to use? through which bulb i can get d maximum amount of light? d2h or d2s? m having d2h cnlight 5000k bulbs nd m ok wid them! Please suggest which one should i go wid?
You mean at 5:28 min? This is called 'Butyl rubber sealant' it is used to reseal the headlights properly! Here is a link: www.retrofitlab.com/en/accessories/butyl-rubber-sealant.html
![How To Install Retrofit Projectors With Bi-Xenon [10 Steps]](http://i.ytimg.com/vi/aesyBC6sSjY/mqdefault.jpg)
Na minha opinião esse é o melhor canal de Retrofit.
Aproveitando queria te fazer uma pergunta. :)
Qual o nome dessa cola que você usou para colar a Mortalha? ua-cam.com/video/DdnzMOHtwzY/v-deo.html
Qual valor desse farol?
@@UPCarTuto fala ae blz, sou fã seu man, fiz meu próprio retrofit através de assistir seus vídeos, entre outras coisas legais que vc posta. Sobre a cola ele é holandês e a cola é uma tal de Bison kit e como uma super bonder gel... www.bison.nl/nl/product.2276
@@UPCarTuto eu, particularmente iria de silicone tradicional da TekBond um pinguinho em cada extremidade do vermelho que aguenta até 316° intermitentes... flw abs
Sensacional! Verdadeiro profissional! Agora esse farol de Up! já tem LED, o brasileiro não tem...
+Retrofitlab eu quis dizer que esse aí já tem LED, ou não? Ao menos parece ser uma fita de LED em baixo do projetor. Parabéns, belo trabalho! :)
Retrofitting xenon where I come from is illegal :'(
Olá amigo, qual a temperatura você deixa o soprador térmico 18 minutos!?!? obrigado e parabéns pelo vídeo!!!
beautiful tutorial friend, so get me one doubt that connection (wire) is left throughout installation is the one that makes the function , High / Low ?
Hi uit Brazilië
Ik heb een twijfel
Om 4:45 u zowel de bovenste uiteinden van de lens stuk metaal en op 05:52 als je het zal vast weer snijd de beide bovenste uiteinden nog steeds er weer.
Dus wat is het punt van het snijden ?
Decisamente un lavoro impeccabile, per dei gran carrozzieri!!!!
For a car that does not have projectors from the factory, after you fit the aftermarket projectors can you use the signal (usually the high beam) without having turned the headlights on?
Ficou top parabéns
Obrigado!
Hi, what's the proper size lense that will fit in 2000 mitsubishi mirage hatchback pls?
Best suitable is 2,5 inch :)
Hello, what type of bulbs did you use for magnifying glass projectors?
HI,
See the discription of this video for the specifications.
In this video we used these bulbs:
5500K XB35 D2S bulbs (See link below)
retrofitlab.com/products/aharon-d2s-xb35-xenon-hid-bulbs?_pos=2&_sid=936f61322&_ss=r
@@Retrofitlab thank you
Regarding wiring, how should we do it?
I didn't see the explanation in the video knowing that the people who have this model car have an original H4 bulb power supply
@@davidelusue6732 Hi David,
Are you not able to connect the wires? What bulbs do you have, did you place an order with us?
Hoe weet je exact of hij horizontaal goed zit?
Er zijn verschillende manieren om dit te doen, bijvoorbeeld het originele lichtbeeld op een stuk muur markeren met tape en later de projector hierop afstellen, in de koplamp zit die al bijna horizontaal door de adapterring en de projector pas na het afstellen helemaal vast draaien. Dit kan ook op een werkbank. Of het kan ook door de koplamp horizontaal neer te zetten (vaak is er wel een horizontale lijn op de reflector of de behuizing) en dan he lichtbeeld ook weer horizontaal afstellen, op een horizontale lijn op de muur of een laser etc.
@@Retrofitlab thanks! Hoe groot mag de shroud maximaal zijn zodat die past in een Up reflector?
@@Nielson15 Wij gebruiken zelf deze shrouds: www.retrofitlab.com/en/iris-1.html
it'll be a good idea to cover up the lens assembly to protect it from the grinding debris. It's all in the details bud.
Have you ever done the kia cerato/forte ?
Sorry, don't have experience with that model/headlight
Hi,
Nice job,but I have question 5:21 You cut off original mounting holes and 5:57 You put in one with original condition??
Maybe not sharp but used to this view. Few days ago I just put exactly the same lenses to polo 6n2 (bought from Retrofitlab of course)
The very first thing which I wanted to do was cut off those mountings because 3" lenses are just hughe. So for now just need to do wiring for hi/lo beam, and the night driving become a pleasure :)
In the meantime I'm doing an interior light fade out turn off, will see.
gg.gg/74qi7
Hello guys! I have a doubt with these system; if you are driving at the day with the sun and everything and everything, and you have the lights off (because you are driving at the middle of the day) and you want to turn-on the high beams lights for a second just to make a sign or something like that, (remember, lights are off) my question is: it does turn on the high beams? (because you take as "high beam" the plate for the projector and not the original high beam light). I hope you undersand my doubt.
aproveitando, queria saber também quanto ficaria no do Peugeot 308
hey guys, do you know about winpower lamps? did you know what projector they use on their kit? my car its a jetta. Tks!!!!
do you have a projector for the seat Mii 2021 model?
At the moment unfortunately not, maybe you can send some pictures of your headlight to info@retrofitlab.com?
esse projetor suporta uma lampada com reator de 55W? a maior temperatura desgastá-lo? eu possuo um igual, mas queria um pouco mais de luz...
La pregunta es.... proyectará bien la luz
9:10
What type of spray paint did u use?
Best is to use heat resistant paint :)
What is the primer and paint you guys use? and which scotchbrite pad do you use? Thanks
+Retrofitlab Ok cool, thanks!
I hate permaseal headlight! Did one before and the headlight housing bent so badly like the headlight in your video..
you need led turn signal bulbs
True, customer should have bought some :-) www.retrofitlab.com/turningsignal
U should reccomend osram diadem indicator bulb :)
Já deveria vir de fábrica assim, fica mais bonito, e além disso, pra versão topo de linha do TSI poderia vir com Angel Eyes, nas outras versões poderia ser oferecido como opcional.
Hello guys!
If u can help me with some advice about my Audi a4 b5 regarding to my headlights i can't get the plastic lense off only with a hairdryer and box ...that adehesive is to thick ,wont even budge .
Can u please tell me what to do ?
Ty guys allot for the quick response !
Gman Alex
good evening! What Projector model shrouds used for this projector, the same as the video?
+Retrofitlab thanks for the reply, I hope to buy the kit with you soon!
ola amigo, tenho 2 perguntas pra voce: gostaria de saber que tpio de cola é esse que vc utiliza nesse video, qual a que voce recomenda e a outra é onde voce compra os projetores ?
Hi. what xenon kit are u using? is the droser visible or you can place it in the headlight?
que tal dond te ubicas y saber si vendes los faros x que necesito unos para el jetta a4 asi con proyector oh si puedes subir un tutorial te lo agradesco
Hi, Im looking foward to install projectors on my Mitsubishi Lancer. My first doubt is about the bulb of the projectors are H1 and my car uses HB4; how can i use or adapt the H1 bulb to fit in my car that uses HB4?
Another question is, because of the law here in brazil, i cannot use xenon all the times, is it possible to use a halogen bulbs like Phillips Diamond Vision inside the projectors?
Thank you.
+Retrofitlab Awesome! Thanks for the answer. Whats the name of this black strip glue that you use to mount the headlight after the projectors installation process?
How did u got the projector separately just asking and how do u know how to make it fit btw
Este kit vem com o as lampadas de xenon?
Quais os cursos para enviar para o Brasil?
Hola. Como se llama el producto con el cual pegas las opticas? Gracias.
***** whit which you hit the optical
orginal glue it`s a "hard glue" or buthyl glue?
It's the hard glue! :(
Helio, do you sell the complete headlights? I don't have the skill needed to do it myself
Hello bro, please help me out.
currently m using the same d2s projector in my hyundai grand i10. can u please tell me which bulb to use? through which bulb i can get d maximum amount of light? d2h or d2s?
m having d2h cnlight 5000k bulbs nd m ok wid them!
Please suggest which one should i go wid?
Retrofitlab how bout d2h bulb?
Belo trab parabens. Vce vende esses farol? e q valor ficaria? grato.
hey , c'est possible de garder le kit xénon H4 et l'installer dans la lentille D2S ?
a fin d'avoir le code et phare dans la même lentille
+Retrofitlab Sur ma FZ8 j'ai une seule ampoule H4 et quand je vais la replacer la D2S je vais plus avoir de phare uniquement le code , vous avez une solution pour avoir le code et phare ?
+Retrofitlab il existe un projecteur qui supporte l'ampoule H4 ?
Can you retrofit a Kia Sorento 2003
Instalação de Led semelhante ao do Jetta ficaria Top tbm!
why would you paint the back reflection housing.. the light won't reflex off anything.. and why is every video no sound..
What is the name of the black strip you use to seal the unit?
Can u tell me what u used to heat the headlamp? is that ok for any those?
Heat gun works for them all
What kind if spray paint u use ?
We use a heat resistant spray paint :)
great tutorial, what did you do before painting the inside of the headlights plz?
Thanks :) We used some "Scotch Brite" to sand the reflector a bit!
Hi. I have hid projector and it doesnt have light in the top middle of it. Whats the problem ?
Nothing
Nice work! Do you sell the headlight with the kit installed? If yes, can you ship a pair of these to Brazil?? I'm looking for a plug&play solution...take in advance
+Retrofitlab ooo what a beautyfull piece, whats the price?
have you a parts for Mercedes w203 c270 cdi
Qual spray é aquele antes da tinta preta?
Aquilo é um primer pra plásticos. Adere melhor a tinta. No Brasil a Colorgin já tem uma tinta pra plásticos na cor preta. Eu usei ela nos faróis do meu fiesta mk5 e apliquei por cima a colorgin alta temperatura preto fosco
ah sim, entendi.
Obrigado amigo!
I like to retofit my honda hrv 2003 model.
Little help please..
Hello ! Whats the temperature setting for the heat gun?? Thank you !
Thank you! I want to open hella headlights to my golf v...How long should I leave in the box?
Thank you! :)
You don't need the box. Just use a heat gun around the headlight
que luces son las que usaron?
Son usadas luces D2S xenon.
Parabéns pelo trabalho! De primeira!
Qual a lâmpada que vc ultilizou ?
how do you adjust it horizontally? or does the adapter plate do that? i have a 9007 headlight but there isent a plate for mine... so ill have to thread it on a bit then manually tilt it then tighten it dont i?
impressiva job. congrats
what is the type of tape
Thx ... You job is very nice
Waar moet de stekker in?
complimenti, sei bravissimo
Belo trabalho!
hey is that h4 housing ?
Yes correct! :)
the best retrofit i've seen so far!
and a question, is it possible for you guys to retrofit my OEM golf mk4 lights?
+Retrofitlab hablas español.?
@@cilantroluna olay!
Como faço pra contratar esse serviço pra meu carro ???
Qual tipo de tinta foi usada?
Thank you :) And heating the headlights? Is not a problem?
Thank you! :)
Golf mk6?
Sorry, no video for it yet..
E o limpador com água de xenonio
And the cleaner with xenon water?
Here in Brazil it is mandatory to have this item under the lighthouse. Like the VW UP does not have this accessory , here we would be fined. But congratulations on the good work !!
Tolong bang bikin tutorial kia carnival tahun 2000
Maybe in the future :) Keep posted on our UA-cam channel..
Good Job, respect!
vw Fox ?
Perfect
Thanks :-)
so you cut the adhesive off then just press it back together? lmao your going to get a LOT of water build up in there... at least heat up the glue or even melt it, then reseal it properly so you dont get leaks, im just really confused lol
Pas mal, et pour scenic 2 de 2007 1.5 ?
Quanto custa um serviço desse? Teria como mandar os valores para meu email?
show pra krl mas eu n tenho coragem de fazer isso no meu pq tenho ctz q vou fazer merda
pena que tem o fox g2 foco duplo ai, ia fica top
infelizmente nao e brasil. ja teria um cliente
nice watch, model number? :D
Haha keep rocking it :)
Ohhh yeah baby! retrofitting is must :D
muito top mas vidieo sem audio nao eras
Hi !!!!!!!!!!
Who does this work in Mexico ?
;)
topp✌
всю фару испортил... аккуратности ноль...
Why is that? :)
Грязная работа
?
@@Retrofitlab пилите корпус и все летит на линзу
Too much work. Buy it already built. Lol
Hello bro, please help me out.
currently m using the same d2s projector in my hyundai grand i10. can u please tell me which bulb to use? through which bulb i can get d maximum amount of light? d2h or d2s?
m having d2h cnlight 5000k bulbs nd m ok wid them!
Please suggest which one should i go wid?
What's is the black strip that you put on the edge of the light?
You mean at 5:28 min? This is called 'Butyl rubber sealant' it is used to reseal the headlights properly! Here is a link: www.retrofitlab.com/en/accessories/butyl-rubber-sealant.html