great video...your channel is the perfect place for people to learn how to do stuff on their tub if they want to save $. Thanks for all the effort making these videos
Great video. I have a leak in the suction assembly in a thermospa lexington. It's recessed into the deck so I can't get ro the back side or underside. Can I try sealing around the cover?
You can try but I do not think it will work. if its the suction assembly that tells me it at the very bottom of the spa and to get to it you might have to tip the spa on its side and go in through the bottom. Thanks for Watching & SUBSCRIBING
@@spaman5440 thanks... the spa is recessed and of course that's the only part I can't get to from the dry side... and the spa is very old so I'm concerned that it will fall apart when it's tipped... but thanks for the reply
Filtration Cycles run from F1 to F8 (F1 = 1 hour every 12 hours / F8 = 8 hours every 12 hours). Preset cycle set from factory is F1, so if in ec or sl mode your water will not reach desired temperature. Hope this Helps Thanks for Watching & SUBSCRIBING
Great video Thanks, Just bought a used Tuff Spa TT400 so it was helpful watching this, I see you have a TT400 behind this one was just wondering if you could go thru the to vent valves mine has one on left right and a large one in middle but their is a empty hole smaller one in the middle? Also what is the large blue thing inside by the power box? Thanks again.
I just ordered a 110/15 amp hot tub. It won’t be here for a while so I’m prepping for it’s arrival. I bought an extension cord that’s 10 ft. 10 Gauge rated for 120/15 only to find out the prepping material says Do not use an extension cord. I planned on running it from the garage via PVC pipe and bury it via PVC pipe to the tub area and come out of the ground on a riser into a plastic weatherproof box and make the connection into that without the cord ever coming in contact with the ground. Is there anything I’m missing on why they said not to use an extension cord? Thank you for the videos, my wife hates me for turning them on when she’s watching her shows :)
Am extension cord is not the recommended.. You can get away with it short term but long term will cause problems... Some manufactures will void warrantee if it is not a dedicated service(Read owners manual) *NOTE* Some dealer will only tell you what YOU want to hear when it comes to this! With a 110 Plug & Play Spa it is recommended that you use a 20 amp dedicated service...Over the years extension cords have caused a lot/most of the problems that I have seen with 110 Plug & Play Spas..Thanks for Watching & SUBSCRIBING
I just bought a Tuff Spa tt450 platinum. I’m putting it on recently installed pavers and it’s isn’t perfectly flat, but theres about a 1/4”-1/2” concave dip toward the middle. Should I be concerned about installing it on this surface?
great video...your channel is the perfect place for people to learn how to do stuff on their tub if they want to save $. Thanks for all the effort making these videos
Glad to help
Great Video!! You explain everything so well. PLEASE keep these videos coming!!! Thanks for all the info!!
Incredibly informative learning tool. Thanks for sharing your knowledge
Very helpful video! And thanks for providing quality products and services, hard to find these days!
Thank You for the kind words.
Really great video very informative. Thanks for showing us this.
Serious video !!! With pressed water latches of course that will not leak the improved connection !!!!!
I like the tuff spa lids
Great video. I have a leak in the suction assembly in a thermospa lexington. It's recessed into the deck so I can't get ro the back side or underside. Can I try sealing around the cover?
You can try but I do not think it will work. if its the suction assembly that tells me it at the very bottom of the spa and to get to it you might have to tip the spa on its side and go in through the bottom. Thanks for Watching & SUBSCRIBING
@@spaman5440 thanks... the spa is recessed and of course that's the only part I can't get to from the dry side... and the spa is very old so I'm concerned that it will fall apart when it's tipped... but thanks for the reply
Great video man!
Great videos!!
Is it any special o-rings or is something from the hardwarestore fine? :-) thinking about the heat and chemicals in the water.
Well over the years Ive learned that the gaskets and O-rings form the manufacture work the best every time. Thanks for Watching & SUBSCIBING
I might get into the hot tub flipping business!
It's a lot of work!
Scott how much did the parts cost the pumps the silicone and everything cost any equipment to run that
Hello Spaman do you add the foam back?
Good Work! Are there any particular brands when buying a used hot tub to stay away from?
Are there any particular brands when buying used hot tubs to stay away from.
What do u use to clean the inside of the tub once the jet housing is removed?
F1 is filtration 1 hr twice a day isn’t it?
Filtration Cycles run from F1 to F8 (F1 = 1 hour every 12 hours / F8 = 8 hours every 12 hours). Preset cycle set from factory is F1, so if in ec or sl mode your water will not reach desired temperature. Hope this Helps Thanks for Watching & SUBSCRIBING
Great video Thanks, Just bought a used Tuff Spa TT400 so it was helpful watching this, I see you have a TT400 behind this one was just wondering if you could go thru the to vent valves mine has one on left right and a large one in middle but their is a empty hole smaller one in the middle? Also what is the large blue thing inside by the power box? Thanks again.
Call me and I'll help You
@@spaman5440 What's your cell #?
@@dustinyamchuk7400 Google ...Arizona Hot Tub Factory
I just ordered a 110/15 amp hot tub. It won’t be here for a while so I’m prepping for it’s arrival. I bought an extension cord that’s 10 ft. 10 Gauge rated for 120/15 only to find out the prepping material says Do not use an extension cord. I planned on running it from the garage via PVC pipe and bury it via PVC pipe to the tub area and come out of the ground on a riser into a plastic weatherproof box and make the connection into that without the cord ever coming in contact with the ground. Is there anything I’m missing on why they said not to use an extension cord? Thank you for the videos, my wife hates me for turning them on when she’s watching her shows :)
Am extension cord is not the recommended.. You can get away with it short term but long term will cause problems... Some manufactures will void warrantee if it is not a dedicated service(Read owners manual) *NOTE* Some dealer will only tell you what YOU want to hear when it comes to this! With a 110 Plug & Play Spa it is recommended that you use a 20 amp dedicated service...Over the years extension cords have caused a lot/most of the problems that I have seen with 110 Plug & Play Spas..Thanks for Watching & SUBSCRIBING
I just bought a Tuff Spa tt450 platinum. I’m putting it on recently installed pavers and it’s isn’t perfectly flat, but theres about a 1/4”-1/2” concave dip toward the middle. Should I be concerned about installing it on this surface?
What happen with the safe what was in it
where do you get your rubber gaskets ?
The Manufacturer will have them...
New subscriber
Where you location
Arizona
Where r u local I want to buy a 110 spa
120V spas are useless in cold weather even full foamed ones
@@firealarmtechguy4444where u live ?
...use a mask when vacuuming Rodent shit....
At no point was the hot tub flipped, it was shared but never flipped :-/
How not to flip a hot tub.breaking all the rules.hope u sell good warranty’s
Just curious, you mean using silicone.? And what else, I'm always always wanting to learn..ty